rev4turbomonster Posted March 2, 2017 Share Posted March 2, 2017 Hi All, Hoping for some help with an old machine of mine. It is a Asus P6T SE i7 920 12gb ram Nvidia GT640 compatible wifi/bluetooth card 120gb SSD I have installed Sierra and compiled clover with the same information that I have used in it before and it is up and running with iCloud FaceTime iMessage etc. The only issue that I have is it will not sleep. As soon as you send it to sleep it wakes straight back up. I have worked out that this is down to the bluetooth part of the wifi card that goes to usb as with this unplugged the machine will sleep. Therefore I believe it is a usb issue preventing sleep and need some help if possible to resolve this. Any ideas. Many Thanks Matt Link to comment Share on other sites More sharing options...
rev4turbomonster Posted March 2, 2017 Author Share Posted March 2, 2017 Hi there the DSDT and config is attached I hope. Thanks for your help https://www.dropbox.com/s/4mt16ele45zn1cc/config.plist?dl=0 https://www.dropbox.com/s/yrb0pg5dvew1gga/DSDT.aml?dl=0 Matt Link to comment Share on other sites More sharing options...
rev4turbomonster Posted March 3, 2017 Author Share Posted March 3, 2017 Hey thanks for the help I have changed those settings going to mac 5,1 which matches my system better unfortunately I still have the same issue I believe it is something to do with USB as when the wifi card is not plugged into usb it works without issue. Do you have any other ideas once again thanks for your help Im not sure how to edit the dsdt to look like you have suggested either. Link to comment Share on other sites More sharing options...
rev4turbomonster Posted March 4, 2017 Author Share Posted March 4, 2017 I really have no clue what is going on I have all of my other usb devices plugged in and the machine will sleep. With the wifi card in the pci express slot it sleeps perfectly. It doesn't work with the bluetooth part of the card connected. The whole point of the card was to have bluetooth for continuity and hand off but that isn't working. Not sure whether it is the card itself or another setting I have configured incorrectly. Thanks Link to comment Share on other sites More sharing options...
MaLd0n Posted March 15, 2017 Share Posted March 15, 2017 use ur original DSDT for apply patches, u have dsdt edit, other mobo, same bios version? Link to comment Share on other sites More sharing options...
Recommended Posts