Jump to content

Gigabyte Z87X-UD3H Sierra Problems


srmusico
 Share

51 posts in this topic

Recommended Posts

hello im trying to install sierra into my fully stable Mavericks system.
I have a Gigabyte Z87X-UD3H , i7 4770k , 16 gb Kingston 2400 MHz .
Clean Install.

 

I have the following issues:

1- In "About this Mac" i have i7 proccesor at 3,5 ghz (in mavericks i have 3,9 ghz ).
and 16 gb of ram at 1333 MHz (2400 MHz in mavericks)

2- I can't boot without the USB installer.
I have installed the bootloader in the ssd, but it freeze when i try to boot without the pendrive.

What can I do? Thanks for the help!

 

 

post-1984962-0-55582400-1487130598_thumb.jpg

post-1984962-0-20524400-1487130600_thumb.jpg

post-1984962-0-14050100-1487130689_thumb.png

post-1984962-0-70316400-1487130689_thumb.png

Link to comment
Share on other sites

Hello!, Sorry for the days of delay.
I Have bought 16 gb more of ram
-2x8GB Kingston Hyperx Beast 2400 Mhz DDR3 CL11 (1,6)
-2x8GB Corsair Pro Series 2400Mhz DDR3 CL11 (1,6V) (NEW)

 

 

I Attach the DSDT.

 

How can I edit the memory MHZ ?

And why do you say that is only cosmetic?

I Bought everything compatible with this frequency .

 

And I have tested in Maverick with Geekbech the same 16 GB (that I had at first time)

with 1600Mhz and then with 2400Mhz. The tests get better results with 2400Mhz,

 

Thanks you so much for the help!!

 
  • Like 1
Link to comment
Share on other sites

Hello MaLd0n !

Thanks for your help. Im  going to try it now.

By the way,... Im new with Clover and this amazing comunity of insanelymac ,I always used Chimera for customacs. And recently Im trying to discover more and more about this boot loader.

Do you know a post where can I learn the most important concepts about this boot loader ? 

thanks you so much again!!

Link to comment
Share on other sites

Hello Again!.

Okey I have been reading more about Clover and how it works. The differences between Chimera etc...

I have done correctly the change and It seems that works at first time:

-The Kingston Hyperx Ram Say 2400Mhz but Corsair Ram say 2285Mhz 

 

-It could be possible to say that I have a Mac Pro (5,1-6,1)?? Or could I have instability or incompatibility problems?

 

-The boot time is working fine but verbose without boot animation .

 

- I dont know if is correct, but I think that I see a bit of freeze when I move a finder window.

How could I know if my graphics are 100% fully working ? 

im using integrated graphics (Intel HD Graphics 4600 ) with my monitor Asus MX239 (24" 1920 x 1080p)

 

 

All the other seems to be working fine. (USB 3.0,Ethernet, Firewire PCi Card, ...)

 

Thanks you so much with your help again bro!

 

PD: Could I know how to edit this system info about the system? im really grateful with your help!

post-1984962-0-48763300-1487727602_thumb.png

post-1984962-0-69755500-1487727607_thumb.png

post-1984962-0-86944400-1487727621_thumb.png

  • Like 1
Link to comment
Share on other sites

-The Kingston Hyperx Ram Say 2400Mhz but Corsair Ram say 2285Mhz 

 

only cosmetic, no problem

-It could be possible to say that I have a Mac Pro (5,1-6,1)?? Or could I have instability or incompatibility problems?

 

use iMac14,2 ;)

- I dont know if is correct, but I think that I see a bit of freeze when I move a finder window.

How could I know if my graphics are 100% fully working ? 

im using integrated graphics (Intel HD Graphics 4600 ) with my monitor Asus MX239 (24" 1920 x 1080p)

intel HD  :lol:  :P

 

but i think have patch, wait me

NOW

u need generate ur SSDT with pike script

Run it

ssdtPRGen.command.zip

save with .dsl extension and compile, .aml

if u dont know about it, post here .txt

 

https://github.com/Piker-Alpha/ssdtPRGen.sh

  • Like 1
Link to comment
Share on other sites

the problem with the temperature is my CPU

it have the stock CPU cooler from the intel box (with new termic paste that I have changed correctly yesterday)

but looking at the Bios sensor, it turns with no S.O. 55-56ºC. 

The cpu is clean, the cooler too, the space is in a good ambient temperature 

the cooler works well and I tested changing the processor to other  motherboard that I have (from a friend computer that im upgrading to a SSD)

and the same issue it turns really hot. (so its not a problem of the motherboard...)

Testing the computer the other day with Geekbench it turns really hot (with HW Monitor)

The cpu its working normally and without overclock .... :blink:

I dont know whats happening jajaja

 


81ºC Maaan?  :shock:  its really crazy and unsure no?

iMac de Pablo.zip

post-1984962-0-69111000-1487995796_thumb.png

post-1984962-0-35007700-1487995805_thumb.png

post-1984962-0-12117200-1487995814_thumb.png

post-1984962-0-81962100-1487995822_thumb.png

post-1984962-0-09881200-1487995850_thumb.png

post-1984962-0-98529600-1487995857_thumb.png

post-1984962-0-74023700-1487995866_thumb.png

  • Like 1
Link to comment
Share on other sites

put ssdt into folder Clover/Acpi/Patched

http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=220662

 

after reboot, send me new ioreg

 

ur PM dont work

DaNiEl 2017-02-25 às 01.20.31.png

 

use it

Intel® Power Gadget v3.0.3.dmg.zip

 

but with geekbench test, the temp is high, stock cooler intel, 70 or 80 c...normal


Replace DSDT too. i apply FIREWIRE, IMEI and LAN

DSDT.srmusico 02.zip

Patches

Fix errors and warnings
Hpet
Darwin
Sata
Dtgp
Slpb
Als0
Lpc
XHC
Hdef
Irqs
Smbus
Bus1
Shutdown
Mchc
Lan
Firewire
Pnlf
Imei
Names in PCI Devices
  • Like 1
Link to comment
Share on other sites

Hello MaLd0n, 

but I don't understand,

what is PM? and what do you changed that wasn't working?

 

thanks again!

 

PD: Clever is still botting without apple logo. All is text (in chameleon was verbose mode ,but I don't know how to change it in clever) how can I change it bro?

  • Like 1
Link to comment
Share on other sites

oh, thats cool .

look at this. im a music producer. this Mac is the center of all my machines of the studio. 

At this moment this is the "beta installation" of all of this. im working with mavericks in other SSD.

I need to get this 100% stable to then try all my plugins to work correctly with Logic Pro X and Final Cut Pro X jajajaja.

The temperature issue I think that is not from the OS. Because in the bios menu says a high temperature too  :D

A friend said me to install a Corsair liquid cooler.. but is so so expensive for a simple cooler bro jajajaja.

Do you think that I need this cooler for my works or will be okey with one like the Hyper T4?

 

 

 

-About the installations seems that everything is working. But im still saying that I think that the graphics aren´t fine

I feel a little "lag" when I move a window or when I change the desktop (like a little freeze).

I have too my Mac Book Pro Late 2013 13". And at this moment I going to do a clean install In there to compare.

( I can do a screen recording to show you) 

 

-The other last thing that I want to configure is finally Clever.

When I turn on the power, I need to wait to enter Clover, and then 5 seconds to enter into the Mac HD.

Is there any possibility to create a kind of "fast boot" to enter directly into the HD?

If is not possible, it will be ok to jaja

 

PD. I have change the Gigabyte Motherboard screen that appears when you boot the computer; to the apple black logo .

And wow the feeling is really cool, like a normal Mac jajaja (only need the boot sound :rofl: ) .  

 

 

One more time , thanks you so much for all this days that you are helping me.

This forum is really fantastic. Sorry if I am boring you bro, but I really need a stable machine  ;)

  • Like 1
Link to comment
Share on other sites

okey. I changed the files.  :D

2 last questions MaLd0n

-What graphic card do you recommend for this machine?

 

And about the processor, it seems that is 3,5. (in mavericks was 3,9 because of the turbo boost I think)

Is the turbo boost working in this system? or im limited only to 3,5ghz without the turbo boost?

thanks again

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...