Brd Posted January 10, 2017 Share Posted January 10, 2017 Hi all,i've extracted the dsdt and compiled it following rehabman's guide,but i've 2 errors left..i know that you are much more experienced than me,so if you can/want to take a look,here is the file! Thanks in advance DSDT.dsl.zip Link to comment Share on other sites More sharing options...
JahStories Posted January 10, 2017 Share Posted January 10, 2017 post the one without any edit Link to comment Share on other sites More sharing options...
SavageAUS Posted January 10, 2017 Share Posted January 10, 2017 Hi all,i've extracted the dsdt and compiled it following rehabman's guide,but i've 2 errors left..i know that you are much more experienced than me,so if you can/want to take a look,here is the file! Thanks in advance Did you disassemble all SSDT and DSDT together? Best bet to post original files. Also put system specs in signature. Then maybe we can see what you are trying to accomplish. Link to comment Share on other sites More sharing options...
Brd Posted January 10, 2017 Author Share Posted January 10, 2017 This DSDT is not from my system,but from a friend of mine that has the same pc(Inspiron 5759)..Signature updated! Link to comment Share on other sites More sharing options...
Brd Posted January 13, 2017 Author Share Posted January 13, 2017 I have extracted the dsdt from linux( @ClaudesTech ) ,and compiled it..it gives me 8 errors(so I think it is more or less the same),but i think a programmer a little more experienced can solve it very quickly...so,if you want to take a look or say to me how to solve them(i already tried to delete the lines with problems,and i already applyed some rehabman's patch) I would be faithful...! ACPI.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted January 14, 2017 Share Posted January 14, 2017 DSDT.Brd.zip Link to comment Share on other sites More sharing options...
Brd Posted January 14, 2017 Author Share Posted January 14, 2017 Thanks a lot for you work! But compiling it ( iasl -da -dl *.aml+ compile in maciasl) i still get 5 errors,as you can see in the screenshot below..thanks again!! Link to comment Share on other sites More sharing options...
SavageAUS Posted January 14, 2017 Share Posted January 14, 2017 Thanks a lot for you work! But compiling it ( iasl -da -dl *.aml+ compile in maciasl) i still get 5 errors,as you can see in the screenshot below..thanks again!! Its already .aml ? why are you trying to recompile it? Link to comment Share on other sites More sharing options...
Brd Posted January 14, 2017 Author Share Posted January 14, 2017 Because i would like to patch it...(Decompile->Open .dsl file on maciasl->Apply Skylake LPC(and others)->Compile again) Link to comment Share on other sites More sharing options...
MaLd0n Posted January 14, 2017 Share Posted January 14, 2017 Ur DSDT with many patches, post ur ioreg here, use Version 3.0.2 fix errors and many warnings HPET SATA DTGP LPC XHC HDAS HDEF id 01 MCHC SLPB RTC SMBUS BLC0 BUS1 IRQs PNLF SHUTDOWN ETC have many others pach for iMac smbios like a ALS0, but u need a fakesmc mod DSDT.Brd.zip Link to comment Share on other sites More sharing options...
Brd Posted January 14, 2017 Author Share Posted January 14, 2017 I didn't understood a lot what you have written(i'm not english),but here is my copy of ioreg..the file you attached keeps giving errors..thanks for the willingness ioreg.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted January 14, 2017 Share Posted January 14, 2017 Use DSDT.Brd.zip and post ioreg after reboot. post kextstat too, run in terminal if u need more patches, apply. Link to comment Share on other sites More sharing options...
magnifico Posted January 15, 2017 Share Posted January 15, 2017 Use DSDT.Brd.zip and post ioreg after reboot. post kextstat too, run in terminal if u need more patches, apply. The man of dsdt ....rsrsrsrs Link to comment Share on other sites More sharing options...
Brd Posted January 18, 2017 Author Share Posted January 18, 2017 Sorry for the delay..so i've booted my hackintosh with your dsdt,saved ioreg and kextstat...here they are As you can see now applelpc loads,and this was my main target..Another thing,a bit strange..i was having some problems installing sierra,i wasn't able to reach the installer...now with your dsdt i can do it...so i have to thank you 2 times! ...but how it's possible? Archive.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 19, 2017 Share Posted January 19, 2017 Ye! All hackintosh need it, many patches. But today is not a priority for many people, for me yes! u use smbios MacBookPro8,1, but ur processor is skylake, i think the best smbios is MacBookPro13,2(Intel Core i5 or Core i7 (6267U, 6287U, 6567U) ("Skylake") u try it? X86PlatformPlugin not load, u need it. u use ssdt? Power management run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/master/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh put in same folder with DSDT Link to comment Share on other sites More sharing options...
Brd Posted January 19, 2017 Author Share Posted January 19, 2017 I tried using this guide to change SMBIOS but doesn't start (Prohibition sign with error "This version of OSX is not supported on this platform")..And the generator keeps giving me this error Link to comment Share on other sites More sharing options...
MaLd0n Posted January 19, 2017 Share Posted January 19, 2017 ye, i think the macbookpro13 support only in macOS 10.12.1 (16B2659) try it clover configurator and put MacBookPro11,4 macbookpro8 is very old, is a sandy bridge processor, u have skylake Link to comment Share on other sites More sharing options...
Brd Posted January 19, 2017 Author Share Posted January 19, 2017 Used that SMBIOS,still not loading...I forgot to answer your question before,i don't use a patched ssdt.. Link to comment Share on other sites More sharing options...
MaLd0n Posted January 19, 2017 Share Posted January 19, 2017 send me ur config.plist. I'll check! Link to comment Share on other sites More sharing options...
Brd Posted January 19, 2017 Author Share Posted January 19, 2017 Here you are!Thanks again! config.plist.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted January 20, 2017 Share Posted January 20, 2017 config.plist.zip after reboot send me ioreg. Link to comment Share on other sites More sharing options...
truemac Posted January 20, 2017 Share Posted January 20, 2017 I tried using this guide to change SMBIOS but doesn't start (Prohibition sign with error "This version of OSX is not supported on this platform")..And the generator keeps giving me this error use this curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh Link to comment Share on other sites More sharing options...
Brd Posted January 21, 2017 Author Share Posted January 21, 2017 @MaLd0n here you are,seems work the same as before..@truesoldier now recognises the processor,but gives me an error..i have to ignore it?(screenshot below) ioreg.zip Link to comment Share on other sites More sharing options...
truemac Posted January 21, 2017 Share Posted January 21, 2017 use MacBookPro 13,1/13,2 Smbios. <?xml version="1.0"?> <mac model="macbookpro131"> <BiosReleaseDate>11/15/2016</BiosReleaseDate> <BiosVendor>Apple Inc.</BiosVendor> <BiosVersion>MBP131.88Z.0205.B07.1611151504</BiosVersion> <BoardID>Mac-473D31EABEB93F9B</BoardID> <BoardManufacturer>Apple Inc.</BoardManufacturer> <BoardVersion>MacBookPro13,1</BoardVersion> <BoardType>10</BoardType> <ChassisManufacturer>Apple Inc.</ChassisManufacturer> <ChassisType>09</ChassisType> <ChassisAsset>MacBook-Aluminum</ChassisAsset> <LocationInChassis /> <Family>MacBook Pro</Family> <FirmwareVendor>Apple Inc.</FirmwareVendor> <Manufacturer>Apple Inc.</Manufacturer> <Mobile>true</Mobile> <ProductName>MacBookPro13,1</ProductName> <SmcRevision>2.36f93</SmcRevision> <Version>1.0</Version> <PrettyName>MacBook Pro 13,1 - Core i5/i7 Skylake</PrettyName> <Year>2016</Year> <ModelId>GVC1</ModelId> <specs> <cpu>Core i5-6360U / Core i7-6660U</cpu> <gfx>Intel Iris Graphics 540</gfx> <ram>1866 MHz LPDDR3 SDRAM</ram> </specs> </mac> <?xml version="1.0"?> <mac model="macbookpro132"> <BiosReleaseDate>11/30/2016</BiosReleaseDate> <BiosVendor>Apple Inc.</BiosVendor> <BiosVersion>MBP132.88Z.0226.B08.1611301700</BiosVersion> <BoardID>Mac-66E35819EE2D0D05</BoardID> <BoardManufacturer>Apple Inc.</BoardManufacturer> <BoardVersion>MacBookPro13,2</BoardVersion> <BoardType>10</BoardType> <ChassisManufacturer>Apple Inc.</ChassisManufacturer> <ChassisType>09</ChassisType> <ChassisAsset>MacBook-Aluminum</ChassisAsset> <LocationInChassis /> <Family>MacBook Pro</Family> <FirmwareVendor>Apple Inc.</FirmwareVendor> <Manufacturer>Apple Inc.</Manufacturer> <Mobile>true</Mobile> <ProductName>MacBookPro13,2</ProductName> <SmcRevision>2.37f18</SmcRevision> <Version>1.0</Version> <PrettyName>MacBook Pro 13,2 - Core i5/i7 Skylake</PrettyName> <Year>2016</Year> <ModelId>GYFH</ModelId> <specs> <cpu>Core i5-6267U / Core i5-6287U / Core i7-6567U</cpu> <gfx>Intel Iris Graphics 550</gfx> <ram>2133 MHz LPDDR3 SDRAM</ram> </specs> </mac> Link to comment Share on other sites More sharing options...
Brd Posted January 21, 2017 Author Share Posted January 21, 2017 I already tried to change it with clover(as i wrote some posts ago),but was a no-go,since 13,1-13,2 doesn't support El Capitan.. Link to comment Share on other sites More sharing options...
Recommended Posts