Jump to content

Tela tremida e mouse lento


nerox
 Share

17 posts in this topic

Recommended Posts

Pessoal,

Consegui instalar o Sierra aqui em uma partição para fazer um teste, tenho o ELCAP tudo bonitinho.

O que acontece é o mudou algumas coisas no Sierra pois meu pc não está reconhecendo a plist do ELCAP. Lembrando que já tinha o Clover instalado na máquina, se eu tentar entrar no sierra por ele o sistema simplesmente não sobe, se eu entro pelo PENDRIVE roda lindão mas a tela fica toda tremida, mouse lento, não sei se está reconhecendo meu driver de vídeo, já instalei o ultimo CUDA e WEBDRIVER para o Sierra.

Alguém tem ideia do que pode ser? Estou tentando fazer um teste no USB, porque se eu trocar tudo na EFI principal e der Chabu, nem no ELCAP eu consigo entrar kkk

Olhem só como está a pasta do EFI Principal onde eu utilizo com ELCAP, fiz um backup pra evitar problemas.

Obrigado desde já

 

post-1371900-0-62054700-1480087818_thumb.png

Link to comment
Share on other sites

Hey Arthur,

Obrigado pela dica, já coloquei TRUE no CSR (0X67) e continue do mesmo jeito. No caso do Sierra não precisa colocar a flag nvda_drv=1 enable  no boot certo?

 

Ainda está tremida, no chrome então parece internet discada, trava tudo a tela com o Mouse

Link to comment
Share on other sites

Está subindo essas 3 kexts, X86PlatformPlugin, ACPI_SMC_PlatformPluginAppleLPC totalizando 133 no sistema. Porém não consigo de maneira alguma ver os states da AppleIntelCPUPowerManagementInfo.kext não aparece nada depois dos comandos. Deveria me preocupar com isso sendo que essas 3 kexts para o gerenciamento de energia está subindo normalmente?

 

post-1371900-0-78103700-1480096158_thumb.png

Link to comment
Share on other sites

HAhauhAu, é que antes fazia daquela forma brow, vou tentar fazer por esse link que passou, retorno aqui para falar se deu certo ou não.

Preeeciso me atualizar mesmo, estou obsoleto já hahaha


Hey Allan,

Consegui pelo MSRDumper, apareceu 5 states (13-16-36-37-38)  :(  quero mais states hahaha no elcap eu tinha 7, é possível fazer algo? 

  • Like 1
Link to comment
Share on other sites

HAhauhAu, é que antes fazia daquela forma brow, vou tentar fazer por esse link que passou, retorno aqui para falar se deu certo ou não.

 

Preeeciso me atualizar mesmo, estou obsoleto já hahaha

De boas bro, esse mundo Hack é uma novidade a cada dia kkkkk  :lol:

 

Consegui pelo MSRDumper, apareceu 5 states (13-16-36-37-38)  :(  quero mais states hahaha no elcap eu tinha 7, é possível fazer algo? 

Tenta com a AppleIntelInfo, de todas ela é a mais atual, e traz melhores informações.

A AICPMInfo e MSRDumper, é pra hardwares mais antigos...

 

Mas tudo influencia no modelo de SMBios que usa.

 

iMacs por serem peças integradas a Apple projetou para evitar super aquecimento, protegendo assim os outros componentes.

 

Agora talvez usando SMBios de MacPro possa trazer algum resultado melhor, afinal eles são feitos pra uso high end.  :guitar:

Link to comment
Share on other sites

Brow, já compilei a appleIntelInfo. Pensei que seria difícil mas deu certo de acordo com seu tutorial. Só que agora deu um problema quando fui rodar os comandos.
 

Open Terminal and type:

cd /Library/Developer/Xcode/DerivedData/AppleIntelInfo-*/Build/Products/Debug


Até aqui beleza.

Load it:

sudo kextload AppleIntelInfo.kext


Quando coloquei o comando kexload apareceu isso:

/Library/Developer/Xcode/DerivedData/AppleIntelInfo-fsuvakklhsyeqvantptpofudjdqh/Build/Products/Debug/AppleIntelInfo.kext failed to load - (libkern/kext) authentication failure (file ownership/permissions); check the system/kernel logs for errors or try kextutil(8)

 

Certeza que é permissão na pasta, e o medo de mexer no terminal e ferrar com tudo, pode me ajudar nessas permissões?
 

Link to comment
Share on other sites

Consegui pessoal, olha como ficou:

AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

enableHWP................................: 0

 

Settings:

------------------------------------------

logMSRs..................................: 1

logIGPU..................................: 0

logCStates...............................: 1

logIPGStyle..............................: 1

 

Warning: Clover hw.busfrequency error detected : 17d78400

InitialTSC...............................: 0x22cfe1a0cb17 (1125 MHz)

MWAIT C-States...........................: 4384

 

Processor Brandstring....................:        Intel® Core i5-3570K CPU @ 3.40GHz

 

Processor Signature..................... : 0x306A9

------------------------------------------

 - Family............................... : 6

 - Stepping............................. : 9

 - Model................................ : 0x3A (58)

 

Model Specific Registers (MSRs)

------------------------------------------

 

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF8051AD7700

------------------------------------------

 - Core Count........................... : 4

 - Thread Count......................... : 4

 

MSR_PLATFORM_INFO................(0xCE)  : 0x81010E0012200

------------------------------------------

 - Maximum Non-Turbo Ratio.............. : 0x22 (3400 MHz)

 - Ratio Limit for Turbo Mode........... : 0 (not programmable)

 - TDP Limit for Turbo Mode............. : 1 (programmable)

 - Low Power Mode Support............... : 0 (LMP not supported)

 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)

 - Maximum Efficiency Ratio............. : 16

 - Minimum Operating Ratio.............. : 8

 

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E000403

------------------------------------------

 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)

 - CFG Lock............................. : 0 (MSR not locked)

 - C3 State Auto Demotion............... : 1 (enabled)

 - C1 State Auto Demotion............... : 1 (enabled)

 - C3 State Undemotion.................. : 1 (enabled)

 - C1 State Undemotion.................. : 1 (enabled)

 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)

 - Package C-State Undemotion........... : 0 (disabled/unsupported)

 

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414

------------------------------------------

 - LVL_2 Base Address................... : 0x414

 - C-state Range........................ : 1 (C6 is the max C-State to include)

 

IA32_MPERF.......................(0xE7)  : 0x642ABFC7F02

IA32_APERF.......................(0xE8)  : 0x66DC5DCBA4F

 

MSR_FLEX_RATIO...................(0x194) : 0xE0000

------------------------------------------

 

MSR_IA32_PERF_STATUS.............(0x198) : 0x240700001000

------------------------------------------

 - Current Performance State Value...... : 0x1000 (1600 MHz)

 

MSR_IA32_PERF_CONTROL............(0x199) : 0x2600

------------------------------------------

 - Target performance State Value....... : 0x2600 (3800 MHz)

 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

 

IA32_CLOCK_MODULATION............(0x19A) : 0x0

 

IA32_THERM_INTERRUPT.............(0x19B) : 0x10

------------------------------------------

 - High-Temperature Interrupt Enable.... : 0 (disabled)

 - Low-Temperature Interrupt Enable..... : 0 (disabled)

 - PROCHOT# Interrupt Enable............ : 0 (disabled)

 - FORCEPR# Interrupt Enable............ : 0 (disabled)

 - Critical Temperature Interrupt Enable : 1 (enabled)

 - Threshold #1 Value................... : 0

 - Threshold #1 Interrupt Enable........ : 0 (disabled)

 - Threshold #2 Value................... : 0

 - Threshold #2 Interrupt Enable........ : 0 (disabled)

 - Power Limit Notification Enable...... : 0 (disabled)

 

IA32_THERM_STATUS................(0x19C) : 0x883B0000

------------------------------------------

 - Thermal Status....................... : 0

 - Thermal Log.......................... : 0

 - PROCHOT # or FORCEPR# event.......... : 0

 - PROCHOT # or FORCEPR# log............ : 0

 - Critical Temperature Status.......... : 0

 - Critical Temperature log............. : 0

 - Thermal Threshold #1 Status.......... : 0

 - Thermal Threshold #1 log............. : 0

 - Thermal Threshold #2 Status.......... : 0

 - Thermal Threshold #2 log............. : 0

 - Power Limitation Status.............. : 0

 - Power Limitation log................. : 0

 - Current Limit Status................. : 0

 - Current Limit log.................... : 0

 - Cross Domain Limit Status............ : 0

 - Cross Domain Limit log............... : 0

 - Digital Readout...................... : 59

 - Resolution in Degrees Celsius........ : 1

 - Reading Valid........................ : 1 (valid)

 

MSR_THERM2_CTL...................(0x19D) : 0x0

 

IA32_MISC_ENABLES................(0x1A0) : 0x850089

------------------------------------------

 - Fast-Strings......................... : 1 (enabled)

 - FOPCODE compatibility mode Enable.... : 0

 - Automatic Thermal Control Circuit.... : 1 (enabled)

 - Split-lock Disable................... : 0

 - Performance Monitoring............... : 1 (available)

 - Bus Lock On Cache Line Splits Disable : 0

 - Hardware prefetch Disable............ : 0

 - Processor Event Based Sampling....... : 0 (PEBS supported)

 - GV1/2 legacy Enable.................. : 0

 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)

 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)

 - Adjacent sector prefetch Disable..... : 0

 - CFG Lock............................. : 0 (MSR not locked)

 - xTPR Message Disable................. : 1 (disabled)

 

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x691400

------------------------------------------

 - Turbo Attenuation Units.............. : 0 

 - Temperature Target................... : 105

 - TCC Activation Offset................ : 0

 

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001

------------------------------------------

 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)

 - Energy/Performance Bias support...... : 1

 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)

 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

 

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x24252626

------------------------------------------

 - Maximum Ratio Limit for C01.......... : 26 (3800 MHz) 

 - Maximum Ratio Limit for C02.......... : 26 (3800 MHz) 

 - Maximum Ratio Limit for C03.......... : 25 (3700 MHz) 

 - Maximum Ratio Limit for C04.......... : 24 (3600 MHz) 

 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x4

------------------------------------------

 

MSR_POWER_CTL....................(0x1FC) : 0x14005F

------------------------------------------

 - Bi-Directional Processor Hot..........: 1 (enabled)

 - C1E Enable............................: 1 (enabled)

 

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA1003

------------------------------------------

 - Power Units.......................... : 3 (1/8 Watt)

 - Energy Status Units.................. : 16 (15.3 micro-Joules)

 - Time Units .......................... : 10 (976.6 micro-Seconds)

 

MSR_PKG_POWER_LIMIT..............(0x610) : 0x1AA580001A9F40

------------------------------------------

 - Package Power Limit #1............... : 1000 Watt

 - Enable Power Limit #1................ : 1 (enabled)

 - Package Clamping Limitation #1....... : 0 (disabled)

 - Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)

 - Package Power Limit #2............... : 1200 Watt

 - Enable Power Limit #2................ : 1 (enabled)

 - Package Clamping Limitation #2....... : 0 (disabled)

 - Time Window for Power Limit #2....... : 13 (20480 milli-Seconds)

 - Lock................................. : 0 (MSR not locked)

 

MSR_PKG_ENERGY_STATUS............(0x611) : 0x4F4D705B

------------------------------------------

 - Total Energy Consumed................ : 20301 Joules (Watt = Joules / seconds)

 

MSR_PKG_POWER_INFO...............(0x614) : 0xD000001E00268

------------------------------------------

 - Thermal Spec Power................... : 77 Watt

 - Minimum Power........................ : 0

 - Maximum Power........................ : 0

 - Maximum Time Window.................. : 0

 

MSR_PP0_POWER_LIMIT..............(0x638) : 0x1AA580

------------------------------------------

 - Power Limit.......................... : 1200 Watt

 - Enable Power Limit................... : 1 (enabled)

 - Clamping Limitation.................. : 0 (disabled)

 - Time Window for Power Limit.......... : 13 (81920 milli-Seconds)

 - Lock................................. : 0 (MSR not locked)

 

MSR_PP0_ENERGY_STATUS............(0x639) : 0x4121DEAF

------------------------------------------

 - Total Energy Consumed................ : 16673 Joules (Watt = Joules / seconds)

 

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

 

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x22

MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x1E0000000000000

MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x1E0000000000000

MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000

MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0

MSR_PKGC3_IRTL...................(0x60a) : 0x883B

MSR_PKGC6_IRTL...................(0x60b) : 0x8850

MSR_PKGC7_IRTL...................(0x60c) : 0x8857

MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x7111B613DD8

MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0xF610911A1A

MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x83830488EFC

MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

 

IA32_TSC_DEADLINE................(0x6E0) : 0x22CFF4D4C95B

 

CPU Ratio Info:

------------------------------------------

Base Clock Frequency (BLCK)............. : 100 MHz

Maximum Efficiency Ratio/Frequency.......: 16 (1600 MHz)

Maximum non-Turbo Ratio/Frequency........: 34 (3400 MHz)

Maximum Turbo Ratio/Frequency............: 38 (3800 MHz)

P-State ratio * 100 = Frequency in MHz

------------------------------------------

CPU P-States [ 32 (37) ]

CPU C3-Cores [ 0 1 3 ]

CPU C6-Cores [ 0 1 2 ]

CPU P-States [ 32 35 37 (38) ]

CPU C3-Cores [ 0 1 2 3 ]

CPU C6-Cores [ 0 1 2 3 ]

CPU P-States [ (16) 32 34 35 37 38 ]

CPU P-States [ 16 32 33 34 35 (37) 38 ]

CPU P-States [ 16 32 33 34 35 (36) 37 38 ]

CPU P-States [ (16) 24 32 33 34 35 36 37 38 ]

CPU P-States [ (16) 24 27 32 33 34 35 36 37 38 ]

CPU P-States [ 16 24 27 28 32 33 34 35 36 (37) 38 ]

CPU P-States [ (16) 24 26 27 28 32 33 34 35 36 37 38 ]

CPU P-States [ (16) 24 26 27 28 30 32 33 34 35 36 37 38 ]

CPU P-States [ 16 24 26 27 28 30 31 32 33 34 35 36 (37) 38 ]

CPU P-States [ 16 24 25 26 27 28 30 31 32 33 34 35 (36) 37 38 ]

CPU P-States [ 16 24 25 26 27 28 29 30 31 32 33 34 35 36 (37) 38 ]

CPU P-States [ (16) 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]

 

ISSO É BOM? IMPRESSÃO MINHA OU TEM TUDO ISSO DE STATES? (16) 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ? SE FOR NOSSA PERFEITO

Link to comment
Share on other sites

 Share

×
×
  • Create New...