[Help] Install OS X on Samsung Series 5 NP550P5C

[jayiska]

hi,

i've installed El Capitan OS X on my laptop Samsung Series 5 NP550P5C,

Intel® Core i7-3630QM CPU@2.4GHz, 2401MhZ, 4Core, 8 Logical Processors

Intel® HD Graphics 4000 / NVIDIA GeForce GT 630M.

 

here are the problems i encountered:

ON FIRST INSTALL

1) loading the installer @50% black screen, rebooted to usb, loading installer before 50% swiped mouse up and down, left to right, click left/right buttons then installer successfully loaded. proceed with install.

2) booting to OSX 50% black screen

- while booting i inserted cdmi cable for another screen, black screen @50% (laptop scree) light on my usb blinking, and the display switched to the hdmi output monitor but the display was distorted and looks 4 screens are overlapping - attached phone #1.JPG.

- repeated to boot, before loading bar reach 50% i swiped the mouse up and down, left and right repeatedly like crazy and clicking left/right click. i don't know why it booted up successfuly but i thought it was hibernating when it reaches 50%.

- configured post install with ##### but upon rebooting the problem just repeated (i just think i didn't successfully configured with ##### because i don't know what drivers to add etc etc). distorted screen display loaded from hdmi, i can tell i lost the keyboard function because i can't type in any password on the login.

ON SECOND INSTALL

same things happened, and i was able to successfully installed the OSX again. I just still did not rebooted my laptop (4days no shut down) until I am able to get help/solutions. installed Clover_v2.3k_r3320-UEFI.pkg and CustoMac Essentials.pkg, opened config.plist in the HDD petition made by clover. the configurator as default opened like with the following (all other photos - 2-12) i have USB 3.0 and i hope it can function correctly after config, realtek audio (driver in windows 10), synaptics touchpad.

SMBIOS, i checked my chipset and equivalent is MacBookPro9,1 (i7-3630QM - ivy bridge)- should i change it from macpro3,1 to macbookpro9,1??

 

i hope someone can really  help me what to configure with clover so my laptop on OSX will function correctly.

 

 

 

[Micky1979]

Sir I guess that Clover 3320 is too old to be discussed here (now 38xx +). Also please take a look on our rules 

[Sherlocks]

hi,

i've installed El Capitan OS X on my laptop Samsung Series 5 NP550P5C,

Intel® Core i7-3630QM CPU@2.4GHz, 2401MhZ, 4Core, 8 Logical Processors

Intel® HD Graphics 4000 / NVIDIA GeForce GT 630M.

 

here are the problems i encountered:

ON FIRST INSTALL

1) loading the installer @50% black screen, rebooted to usb, loading installer before 50% swiped mouse up and down, left to right, click left/right buttons then installer successfully loaded. proceed with install.

2) booting to OSX 50% black screen

- while booting i inserted cdmi cable for another screen, black screen @50% (laptop scree) light on my usb blinking, and the display switched to the hdmi output monitor but the display was distorted and looks 4 screens are overlapping - attached phone #1.JPG.

1.JPG

- repeated to boot, before loading bar reach 50% i swiped the mouse up and down, left and right repeatedly like crazy and clicking left/right click. i don't know why it booted up successfuly but i thought it was hibernating when it reaches 50%.

- configured post install with ##### but upon rebooting the problem just repeated (i just think i didn't successfully configured with ##### because i don't know what drivers to add etc etc). distorted screen display loaded from hdmi, i can tell i lost the keyboard function because i can't type in any password on the login.

ON SECOND INSTALL

same things happened, and i was able to successfully installed the OSX again. I just still did not rebooted my laptop (4days no shut down) until I am able to get help/solutions. installed Clover_v2.3k_r3320-UEFI.pkg and CustoMac Essentials.pkg, opened config.plist in the HDD petition made by clover. the configurator as default opened like with the following (all other photos - 2-12) i have USB 3.0 and i hope it can function correctly after config, realtek audio (driver in windows 10), synaptics touchpad.

SMBIOS, i checked my chipset and equivalent is MacBookPro9,1 (i7-3630QM - ivy bridge)- should i change it from macpro3,1 to macbookpro9,1??

11.png

 

i hope someone can really  help me what to configure with clover so my laptop on OSX will function correctly.

 

 

1.JPG2.png3.png4.png5.png6.png7.png8.png9.png10.png11.png12.png

 

 

give me config.plist

 

i have exprience about help samsung laptop user with ivy bridge.

 

samsung laptop with ivy have difference LCD Connector.

 

anyways, give me file

[jayiska]

give me config.plist

 

i have exprience about help samsung laptop user with ivy bridge.

 

samsung laptop with ivy have difference LCD Connector.

 

anyways, give me file

 

hi!

thanks for the interest to help. here's the plist...

i think the plist was just the default as installed during the installation process.

i hope all that my other devices will work also..

i also attached the plist of the installer that i used..

 

thanks!

 

plist.zip

Sir I guess that Clover 3320 is too old to be discussed here (now 38xx +). Also please take a look on our rules 

sorry sir about this.. i wasn't able to think that the clover i used was too old due to frustration and stress (i've been trying to install OS X on my laptop for more than two months now). i look into the downloads section and was able to see that there's clover 3811 and i would use it just as i receive feedback from sir Sherlocks. and i also apologise int i had mentioned any bad things ( result of ### hush hush test). don't worry this will not happen again. cheers and best regards!

[Allan]

- configured post install with ##### but upon rebooting the problem just repeated (i just think i didn't successfully configured with ##### because i don't know what drivers to add etc etc). distorted screen display loaded from hdmi, i can tell i lost the keyboard function because i can't type in any password on the login.

And as you can see in our Rules, we don't give support for Tonymac tools.

 

Read:

VERY IMPORTANT: PLEASE READ! (ABOUT TONYMACX86 AND iATKOS M / Y)

Why InsanelyMac does not support tonymacx86

[jayiska]

And as you can see in our Rules, we don't give support for Tonymac tools.

 

Read:

VERY IMPORTANT: PLEASE READ! (ABOUT TONYMACX86 AND iATKOS M / Y)

Why InsanelyMac does not support tonymacx86

i deeply appologize for that sir, i was in a rush and desperation because i have been trying to solve my problem for so long and i really do not have the technical capability of knowing if a tool is his/hers, as a normal "just know how to use a pc" individual, all i know a free tool from the internet that i think can help me i just have to get it and try.  and i read the link you posted and realised that it was the m##b##, i just cited in my post that i used it before and nothing happened. and I'm currently on fresh re-install of el capitan and i just opened the clover configurator as of now and i don't know if the screen shot i posted (SMBIOS) is good to go before i save the plist.. i did not use the tool from them on my current install.. thats why i still haven't turned off my laptop since the last install/successful reboot because i know i will not be able to open os x again. i really apologise for that sir.... i hope you understand..

[Allan]

NP bro, is good to know that you understand now. 

 

Just for the thread not get off-topic, I'll create a new topic for your issue ok?

[jayiska]

NP bro, is good to know that you understand now. 

 

Just for the thread not get off-topic, I'll create a new topic for your issue ok?

thanks kindly let me know the topic.

 

regards,

jayiska

[jayiska]

video drivers are not installed - screen is flickering

no audio

hdmi output not working

battery percentage can't display

wifi adapter cannot be detected/not working

cd rom drive looks dead

[Allan]

Video > You'll need enable Intel HD 4000: Intel HD4000 and Haswell Inject AAPL,ig-platform-id - Just take the right value for you, put it in config.plist, and use Inject Intel.

And disable Nvidia GT 630M: DSDT/SSDT: Disable dedicated GPU to extend battery life (Laptop-exclusive)

 

Audio > You need know what is your Codec ID to inject your audio, or install VoodooHDA.

 

Baterry > You can use ACPIBatteryManager.kext or apply a patch in your DSDT.

 

WiFi > What's your WiFi manufacturer? You can use DPCIManager.app to know that.

 

CD-Rom > In the most of cases it works OOB, check if in your UEFI/BIOS are enabled all the SATA ports.

 

I gave to you all this links just using "Search bar" above, if you have more doubts, you can use it too 

 

Cya 

[jayiska]

i am having a new problem, everytime i insert a usb stick to my usb port my laptop hangs/freezes. anyone knows what causes this and knows how to solve this?

 

thanks in advance!

[Allan]

Try use USB injection in your config.plist

 

Read: USB

[jayiska]

Try use USB injection in your config.plist

 

Read: USB

thanks mr.allan!

no more problem with my usb port.

 

my problems are being narrowed down slowly but surely.

there's only few things left for me to do,

-graphics 

                

-keyboard has a num-pad 

-audio (alc269)

-camera

by the way does this has something to do with which drivers/kext i have to use?

still haven't found the right kext for it, i tried some (including the forbidden apple-tried their universal driver/kext but i had low sound even the volume was set high and the mic input was always ON and is always having feedback sound[sorry for mentioning this]) but still no luck.

OR maybe (for sure) it's just because i do not know the correct process of installing the kext file and PATCHING.

everytime i see *patch* it's like *beeping/censored* sound in my brain, "apply patch on dsdt" patch this and that.. etc etc.

really don't know what those mean and how to do it and i hope an angel would drop by to show me path to the light.

 

im pretty sure i will be able to make everything work (maybe after 1 year?? lol).

 

i hope more people (with more patience) would also drop by to give suggestions/instructions for a really dummy (like for a 2nd grader T_T-really)

[jayiska]

count down to problems:

-intel graphics hd 4000 still not functioning as expected;

i can't watch any movie from DVD Player, VLC, DivX player (app crashes upon opening), but i can watch you tube and other streaming sites. i tried the app Kodi and it was able to play a .mkv video format but it was lagging (looks like it displays frames from every 1 sec)

and also why it shows there's no kext installed for intel hd4000?

-keyboard function - not expecting to be solved

 

i hope someone can help me. thanks in advance!