Jump to content

Clean install of Lion on ASUS IPIBL-LB


CharCat
 Share

13 posts in this topic

Recommended Posts

I recently received an HP Pavilion A6400f with the ASUS IPIBL-LB mobo.  My brother keeps telling me to get a Mac so I thought I'd try to make a hackintosh using OSx Lion since both are from the same era. So far, all I've found are tutorials that all say "first get such and such from a previous install of OSx". If I had a previous install or access to a Mac I wouldn't need to try making a hackintosh. So, any suggestions or guidance? Hopefully, once I get OSx on, I'll be able to install Linux Mint and multiboot.

 

RAM: 8GB

HDD: 500GB

Chipset: Intel G33

Video: Intel GMA 3100 On board

Audio: On board ALC888S

Network: Realtek 8111C On board

 

Link to comment
Share on other sites

  • 2 weeks later...

Gee, Herve, your answer was so helpful. I've installed an EVGA GeForce 8400 GS PCI 16 vid card. Still, every post I've seen seen starts out with "On a Mac..." or words to that effect. Hello. If I had a Mac I bloody well wouldn't need a hacintosh then, now would I?

Link to comment
Share on other sites

Well, Nawcom BootCd works great. I also enter PCIRootUID=1 -x, swap the Nawcom with the Snow Lion, hit F5 and wait. The Snow Lion does NOT appear on the list of drives, only my HDD partitions. Had the same problem using that other guy's boot disk. Am I missing something?

Link to comment
Share on other sites

"I guess you meant Snow Leopard... Is it a genuine retail SL disc or a disc made out of an image? If so, please give details."

 

Yup, Snow Leopard. Too many wild cats to keep straight. The disc I have is from an ISO of the distro.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

I used NAWCOM BootCD with boot: mach_kernel to get my retail Snow Leopard disc to begin its thing. It got as far as "Refusing new kext com.apple.lokit.IOUSBFamily, v3.9.6: already have loaded v6.6.6.". Then it hung at

"com_lnx2mac_RealtekRTL81xx: Ethernet addres 00:1f:c6:04:74:b0". (I've a photo of what was on the screen but I don't see a way to include it.) I removed the TPLink wireless network card thinking it may be causing the problem, but no go. The install hanged at the same spot. Did I forget something?

 

HP Pavilion A6400f

Intel E2200 CPU

8 GB RAM

ASUS IPIBL-LB mobo

Link to comment
Share on other sites

Try Cpus=1 or alternatively download SL's Legacy kernel and load that onto Nawcom's RAMDisk. If that doesn't work, try getting your bus ratio and using that in context as busratio=xx. That's what I had to do with my E7300 C2D and my i3 350M PCs. Also make sure you are using GraphicsEnabler=Yes to enable your GeForce card.

 

Best regards,

 

- Matt

Link to comment
Share on other sites

Try Cpus=1 or alternatively download SL's Legacy kernel and load that onto Nawcom's RAMDisk. If that doesn't work, try getting your bus ratio and using that in context as busratio=xx. That's what I had to do with my E7300 C2D and my i3 350M PCs. Also make sure you are using GraphicsEnabler=Yes to enable your GeForce card.

 

Best regards,

 

- Matt

Thank you. I'll give that a shot. To load them onto the ram disck, do I type the info at the same place where I'd enter "mach_kernal"?

Link to comment
Share on other sites

  • 3 weeks later...

I got a retail Apple DVD of Snow Leopard to almost install. I used the PCIRootUID=1 boot flag. When the install finished the machine restarted automatically and hung at the boot screen. So I decided to start over, reformatting the HDD using Mac format, GUID etc. I first tried the PCIRootUID=1 -x boot flag but got a kernal panic. I tried again without the -x switch and the install went slick as snot on a doorknob. Unfortunately the PC rebooted again and hung at the boot screen.
Some more info: The first time I only had 2GB of RAM (1 stick) and no PCI wireless card. The second time, 8GB RAM (4 sticks) and the PCI wireless card installed. The machine rebooted at the same point both times - The install progress bar was full and then the reboot.I also tried with GraphicsEnabler=1. No chance to start Snow Leopard, no chance to run Kexts. (I have pix of the kernel panics but don't know how to include them.)
Suggestions?

MOBO = ASUS IPIBL-LB Benicia
CPU = Intel E2200
HDD-1 = 180 GB Caviar SATA-0 (Win 7 Pro)
HDD-2 = 500 GB WD Caviar SATA-1 (OSx)
EVGA NVidia 8400

Link to comment
Share on other sites

SUCCESS! After getting Snow Leopard installed I rebooted with the boot loader. I then selected Snow Leopard and before clicking on anything I entered PCIRootUID=1. That was the secret sauce to get it to work. Now to find a compatible wireless PCI/PCIe card.

Link to comment
Share on other sites

The 8400 is purring like a kitten. Now the big question. I managed to upgrade to last Snow Leopard release. Can I, dare I say it, upgrade to a later version such as El Capitan or even Mavericks on my ASUS IPIBL-LB mainboard based computer?

Link to comment
Share on other sites

 Share

×
×
  • Create New...