Nicodo Posted June 29, 2016 Share Posted June 29, 2016 Hi all I just built my first hackintosh: Mobo: Gigabyte GA-H170-HD3 ATX Socket 1151 CPU: Intel Skylake Core i5-6600 / 3.3 GHz (Turbo Boost 3.9 GHz) 4 cores Cache Socket, Socket 1151 (BX80662I56600) RAM: CRUCIAL 16GBx2 32GB Kit, DDR4 2133 MT/s DIMM 288 (CT2K16G4DFD8213) HD: A 2TB Cooler: ARCTIC Freezer 7 PRO Rev.2 - 150 W Power: Corsair CP-9020097-EU VS Series VS550 ATX/EPS 80 PLUS 550W Case: Corsair Carbide 200R CD reader: Sony Optiarc 18X SATA DVD-ROM Drives DDU1681S-0B USB key: 32GB Verbatim Pinstripe The hardware building was just a breeze. I installed the little animal stuff on my USB stick just as required. I set up the UEFI to the best I could since the layout was different from the screen shots I had seen. I hope I did it well. Selecting the USB as the boot drive wasn't a breeze at all. I had to reformat and reinstall it several times. I don't have a sHCI mode and I have only one xHCI Hand-off. Then the boot process starts apparently correctly and then stalls in the middle with the following screen and there goes back to startup screen. I tried booting in verbose mode by pressing the V key, cmd+V or ctrl+V. It changes nothing. I reformatted the USB stick and reinstalled it at least a dozen of times. What to do? Toss the whole gear and forget about it? Is there another installer that works? TIA Nick Link to comment Share on other sites More sharing options...
Recommended Posts