fiass Posted March 28, 2016 Share Posted March 28, 2016 Hello Everyone I'm trying to install El Capitan on my Laptop i was able to install it but i could not find the right kexts for my wifi or nvidia or ethernet or audio or my intel HD 4000 and the mac is too slow may by the kexts that i used to install it have something to do with this problems actually it's almost like nothing is working, i also have windows 10 installed on MBR drive so it is not UEFI boot my laptop aspects are : Computer: Acer Aspire V3-571G CPU: Intel Core i5-3210M (Ivy Bridge-MB PGA SV, L1) 2500 MHz (25.00x100.0) @ 1197 MHz (12.00x99.8) Motherboard: Acer VA50_HC_CR Chipset: Intel HM77 (Panther Point) Memory: 8192 MBytes @ 798 MHz, 11.0-11-11-28 - 4096 MB PC12800 DDR3 SDRAM - SK Hynix HMT451S6MFR8C-PB - 4096 MB PC12800 DDR3 SDRAM - SK Hynix HMT451S6MFR8C-PB Graphics: Intel Ivy Bridge-MB GT2 - Integrated Graphics Controller [E1/L1/N0/P0] [ACER] Intel HD Graphics 4000, 2176 MB Graphics: NVIDIA GeForce GT 630M [Acer] NVIDIA GeForce GT 630M, 2048 MB DDR3 SDRAM Drive: ST1000LM024 HN-M101MBB, 976.8 GB, Serial ATA 3Gb/s @ 3Gb/s Drive: HL-DT-ST DVDRAM GT70N, DVD+R DL Drive: WDC WD10JMVW-59AJGS3, 976.7 GB, Serial ATA 3Gb/s @ 3Gb/s <-> USB Sound: Intel Panther Point PCH - High Definition Audio Controller [C1] Network: Broadcom BCM57785 NetLink PCI-E Gigabit Ethernet Controller Network: Atheros/Qualcomm AR5BWB222 Wireless Network Adapter OS: Microsoft Windows 10 Professional Build 10586 Can anyone help and tell wich kexts are suited for my laptop to put them in the kexts folder in Clover during install or is it better to use the essential kexts for the install and then apply the kexts PS: i'm a new to Hackintosh and to Mac in general i always used pc and Windows Thank you in advance Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 Hi there, Nice that you figured out how to install can you post a screenshot of the pcilist on dpimanager? I don't know if your laptop is using optimus, if it does, you will be able to use only the intel hd... And you probably need to replace the wifi card, cause it seems not compatible, but I did not made a deep search. 1 Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 Thank you for the quick answer Yes i have Nvidia Optimus if i can use my ethernet would be great as for the screenshot it will take me some time because i'm now on Windows and in mac i canno't connect to the internet another question i didn't manage to make it boot without the usb or make dual boot with Windows can help with that also Sorry for my english Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 for ethernet try placing FakePCIID_BCM57XX_as_BCM57765.kext in efi/clover/kext/10.11 ... not every kext in the package, just that. for sound you can use voodoohda you can find it inside Pandora 3.0 alongside some others very useful tools! 1 Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 I already tried to use voodoohda but it didn't work but i didn't try this Pandora 3.0 what is Pandora 3.0 ? This is the screenshot : Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 is ethernet working? wifi is not supported on OS X... the only thing you can do is replace it with something like this or you can use a usb dongle share your config.plist, I can take a look to enable the iGPU Pandora 3.0 is a tool with a collection of useful things. Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 Thanks very much the Lan (Ethernet) is working and now i'm writing from El Capitan the config.plist is from the EFI Partition in the bootable USB that i made to install but i canno't boot Mac without the USB yet can you help to make dual boot with windows 10 i don't know how to attach the file so i copied it as Text below : (removed) Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 please attach it as a file using: more reply options then attach Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 Got it it is attached config.plist.zip Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 try this, place it in efi/clover at clover boot screen select options then change the config to config1... config1.plist.zip please post without centering the text Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 I tried to boot with config1 the apple logo shows and the progress bar reaches the half of the bar and then the screen goes black and nothing happen i had to hold the power button to turn off the laptop and then turn on again and boot with config and still no Audio Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 show me a screen of info about this mac- more info -graphics with your config try this other one.... config1.plist 2.zip Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 the nvidia chip will never work sadly... you can disable it through Dsdt patch So now iTunes should do this fast right? 1 Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 Thanks but is it normal to be black not like your photo and i still cannot control the backlight and the battary is going low too fast what is DSDT patch and how can i do it ? Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 It's like that when no music is playing... for battery you have to disable nvidia via dsdt please at clover boot screen press f4, wait one minute, then boot... attach the content of /efi/clover/acpi/origin zipped please. 1 Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 sorry cause it took me time origin.zip Quote Link to comment Share on other sites More sharing options...
gengik84 Posted March 28, 2016 Share Posted March 28, 2016 Put DSDT and SSDT in EFI/Clover/acpi/patched Put kext in EFI/Clover/kext /10.11 Replace the config.plist... restart Check battery and checks if nvidia is disabled test.zip 2 Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 Now i can't see nvidia card just Intel Hd so i geuss it worked but still cannot control the backlight and the battary is the same about half an hour and it will be empty PS : i had to try to boot 3 times to enter Mac because it just reboot alone 2 Quote Link to comment Share on other sites More sharing options...
gengik84 Posted March 28, 2016 Share Posted March 28, 2016 For backlight, put in efi this kext ACPIBacklight.kext.zip 1 Quote Link to comment Share on other sites More sharing options...
JahStories Posted March 28, 2016 Share Posted March 28, 2016 Gengik in da house! About the battery don't expect 10hours on it. 1 Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 This kext didn't work the same and now i got the prohibited sign 2 times but i was able to boot after many reboot it is not a problem with the battary but the the screen is too bright anyway thank you guys but one last favour can you help me make El Capitan boot with out the bootable usb and make a dual boot on the hard disk with windows 10 Quote Link to comment Share on other sites More sharing options...
gengik84 Posted March 28, 2016 Share Posted March 28, 2016 Si prega, provate questo config config1.plist.zip Quote Link to comment Share on other sites More sharing options...
fiass Posted March 28, 2016 Author Share Posted March 28, 2016 Great no more prohibited sign or any other boot problem but still no control over the backlight 1 Quote Link to comment Share on other sites More sharing options...
gengik84 Posted March 28, 2016 Share Posted March 28, 2016 Try this... DSDT.aml.zip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.