enjamul Posted March 19, 2016 Share Posted March 19, 2016 Hello, I loosed my all hope and came to write here again. I purchased a PC for using hackintosh. I always have an unfortunate luck. I have purchased my custom build PC some days ago...I've asked for "Gigabyte GA-H97-D3H" Motherboard...But the seller given me "Gigabyte GA-H97-HD3" and I didn't notice that while I've purchased. My Desktop PC Specs Are: Processor: i5-4460 Graphics: Intel 4600 Ram: (8GB+4GB=12GB) DDR3 Mobo: Gigabyte GA-H97-HD3 HDD: Toshiba PSU: Thermaltake 450w Now the problem is: ------------------> I can't install OSX Elcapitan 10.11 to my Desktop PC. I'm showing the problem step by step: I have clover installed USB-Bootable Pendrive. So entireing to my clover menu I add "-v" as boot args then "Boot OSX Base System" Then some codes comes.....When the below image comes the monitor losts graphics and comes a blank black screen and after some some seconds monitor power goes off. [ This happens so fast, So I captured this picture using camera shutter speed ] Here is the example: Information About My Bios Setting: Secure Boot: Disabled. vt-d: Disabled. SATA Mode: ACHI Boot Device: Legacy OnlyDMVT: 128MB [i can't make it less]Intel Graphics: 64MBInfo about USB-Boot-Installer: Usb: 2.08GB SizeOSX Version: 10.11Now what can I do? Please help me....I'm waiting for your responses. [Note: I'm not much expert in this process] This is my efi folder: https://drive.google.com/folderview?id=0B4u5uiV50s79NVEyS3lDNS0wVWM&usp=sharing [ You can download it and check, if there's anything wrong, You can correct it and upload me back ] Link to comment Share on other sites More sharing options...
Dwarfy Posted March 19, 2016 Share Posted March 19, 2016 You need to change some stuff in your config. For your system iMac SMBIOS 14.2 is good. And I believe you've provided us with wrong EFI, looks like an EFI for a laptop. 1 Link to comment Share on other sites More sharing options...
LockDown Posted March 19, 2016 Share Posted March 19, 2016 Either no fakesmc or iGPU issue. Make sure its loaded. Fornthe iGPU, fake the id in fakeid if using clover. 2 Link to comment Share on other sites More sharing options...
enjamul Posted March 19, 2016 Author Share Posted March 19, 2016 Hello, Thanks for your responses !Can you kindly solve the problems and upload back the file to me? I'm totally newbie.Thanks. 1 Link to comment Share on other sites More sharing options...
LockDown Posted March 19, 2016 Share Posted March 19, 2016 you dont need a fancy config during install. extract and replace your config.plist with this enjamul_config.zip 2 Link to comment Share on other sites More sharing options...
enjamul Posted March 19, 2016 Author Share Posted March 19, 2016 you dont need a fancy config during install. extract and replace your config.plist with this Hello, Thanks for your file. I have tried it and now its not going the graphics in that position,,,but now I am stuck in the picture below position...Please check.. Link to comment Share on other sites More sharing options...
LockDown Posted March 19, 2016 Share Posted March 19, 2016 send me the clover folder 2 Link to comment Share on other sites More sharing options...
C.Frio Posted March 19, 2016 Share Posted March 19, 2016 hi... your boot device is "legacy" mode... was your pen drive made on "legacy" mode too? use only one memory stick... compare MB http://motherboards.specout.com/compare/3477-3479/GIGABYTE-GA-H97-D3H-vs-GIGABYTE-GA-H97-HD3 c.frio 1 Link to comment Share on other sites More sharing options...
enjamul Posted March 19, 2016 Author Share Posted March 19, 2016 send me the clover folder Hello, Thanks for your response and help. Here is the download link: https://drive.google.com/file/d/0B4u5uiV50s79ZEowekZ1VW4zdTA/view?usp=sharing Thanks. Waiting for your response. Link to comment Share on other sites More sharing options...
Dwarfy Posted March 19, 2016 Share Posted March 19, 2016 Your link doesn't work, as it is against Google user agreement. So they say. Put the EFI in another folder then compress it, send the zip file through DropBox, and someone will fix it. 1 Link to comment Share on other sites More sharing options...
enjamul Posted March 19, 2016 Author Share Posted March 19, 2016 Your link doesn't work, as it is against Google user agreement. So they say. Put the EFI in another folder then compress it, send the zip file through DropBox, and someone will fix it. send me the clover folder New download link: http://www.megafileupload.com/n721/Pendrive_File.zip Click on "Slow Download - Free User" to download Link to comment Share on other sites More sharing options...
Dwarfy Posted March 19, 2016 Share Posted March 19, 2016 I've sent you an EFI folder, try it. 1 Link to comment Share on other sites More sharing options...
enjamul Posted March 19, 2016 Author Share Posted March 19, 2016 Not works your efi bro, Stuck in the same line. Link to comment Share on other sites More sharing options...
Dwarfy Posted March 19, 2016 Share Posted March 19, 2016 http://cloud1.zoolz.co.uk/s-Gqx5JXwD try this. It might just be your USB stick, since you told me you don't have a mac and your friend made it for you on his hack. That EFI should be good, works on other haswell systems. Link to comment Share on other sites More sharing options...
enjamul Posted March 19, 2016 Author Share Posted March 19, 2016 Not works. Stuck in the same line. Link to comment Share on other sites More sharing options...
Dwarfy Posted March 19, 2016 Share Posted March 19, 2016 I'd suggest you to remake your USB. Follow this guide if you need to http://www.insanelymac.com/forum/topic/311440-el-capitan-installment-guide-by-a-noob-for-windows-users-without-mac/ Or this one if you got a Mac/Hackintosh. http://www.insanelymac.com/forum/topic/305255-making-a-10101011-usb-installer-w-clover-uefi-and-legacy-the-correct-way/?do=findComment&comment=2122209 This needs to be done the UEFI way. You need FakeSMC (from hwsensors.com, or you can use the FakeSMC from the EFI folder I gave you), OsxAptioFixDrv-64.efi and HFSPlus-64.efi (replace it with Vbox). I suggest you make your own USB, easier to "debug" your own problems in the future with it. Because the EFI you sent looked like if it was made for a laptop. Good luck. 1 Link to comment Share on other sites More sharing options...
enjamul Posted March 24, 2016 Author Share Posted March 24, 2016 Please help me with this: http://www.insanelymac.com/forum/topic/311536-xcpm-r-then-pc-restarts-and-back-to-clover-menu/ Link to comment Share on other sites More sharing options...
Recommended Posts