AppleALC — dynamic AppleHDA patching

arsradu · June 7, 2018

4 minutes ago, ammoune78 said:

@arsradu , please can you share AppleHDA 10.13.5 as i have to redownload the image only for that? Or can I use 10.13.4?

You could probably use the one in 10.13.4, as well. I didn't try this method so I have no idea if it works. To me, the AppleALC kext works perfectly fine.

ammoune78 · June 7, 2018

1 minute ago, arsradu said:

You could probably use the one in 10.13.4, as well. I didn't try this method so I have no idea if it works. To me, the AppleALC kext works perfectly fine.

Yes, but for me its not the same case of your's for sure, but I'll stick with that 10.13.4 and see, hope for me if it will work

ammoune78 · June 7, 2018

I confirm that rollback HS AppleHDA fixed the issue :frantics:

ammoune78 · June 7, 2018

19 hours ago, Pavo said:

Think someone needs to explain this little more, because I changed layout-id to alc-layout-id in SSDT for HDEF device and this is what I get in IORegistry.

alc-layout-id = 2

apple-layout-id = 7

layout-id = 7

#scratcheshead

You're the MAN, the alc-layout-id in DSDT fixed my Audio to get working in addition to AppleALC 1.2.8 v2, really thanks PAVO :thumbsup_anim: :wink_anim:

Pavo · June 7, 2018

2 minutes ago, ammoune78 said:

You're the MAN, the alc-layout-id in DSDT fixed my Audio to get working in addition to AppleALC 1.2.8 v2, really thanks PAVO

You welcome I guess lol

ammoune78 · June 7, 2018

5 minutes ago, Pavo said:

You welcome I guess lol

I was confused with too much comments, some have it working some no, some suggest things some other, but vit9696 pushed me to try them all! I didn't have had any problem to install Mojave from the first try, until Audio and Wifi, but wifi got working on the second attempt by adding Atheros kext into S\L\E.

I confirm that Ozmosis also work fine except APFS and some things that need a little workaround, cecekpawon maybe will post result, otherwise if he let me i'll post the needs

LockDown · June 8, 2018

Quote

You may replace `layout-id` with `alc-layout-id` after an upgrade, but for compatibility reasons existing `layout-id` values will be automatically converted to `alc-layout-id`.

success on Mojave but not on Sierra/High Sierra.

It seems "auto convertion" of existing "layout-id" to "alc-layout-id" does not work on Sierra/High Sierra... it works n Mojave though.

Just my observation.

Thanks

Edited June 8, 2018 by ellaosx

Matgen84 · June 8, 2018

1 hour ago, ellaosx said:

success on Mojave but not on Sierra/High Sierra.

It seems "auto convertion" of existing "layout-id" to "alc-layout-id" does not work on Sierra/High Sierra... it works n Mojave though.

Just my observation.

Thanks

Hi

I left layout-id=1 (for my system) inject by Clover in High Sierra and Mojave, AppleAlc v1.2.8 works well, on both OS. I also use -lilubeta -alcbeta on 10.14.

Edited June 8, 2018 by Matgen84

Pavo · June 15, 2018

Anyone else try using latest 1.2.8 with SIP enabled on Mojave? It doesn't seem to work with SIP enabled.

Badruzeus · June 15, 2018

I'm gong to try and report soon, thanks.

Badruzeus · June 15, 2018

1 hour ago, Pavo said:

Anyone else try using latest 1.2.8 with SIP enabled on Mojave? It doesn't seem to work with SIP enabled.

AppleALC v1.2.8 (built 3 days ago) is working fine here with SIP: Enabled under 10.14 Beta, as I can hear my Audio Output, my Input just works either. My audio Codec is Realtek ALC269-VB (10EC:0269), I leave Audio Inject within Clover config.plist=empty.. but just patcing DSDT with:

Spoiler


Device (HDEF)
            {
                Name (_ADR, 0x001B0000)  // _ADR: Address
                OperationRegion (HDAR, PCI_Config, 0x4C, 0x10)
                Field (HDAR, WordAcc, NoLock, Preserve)
                {
                    DCKA,   1, 
                    Offset (0x01), 
                    DCKM,   1, 
                        ,   6, 
                    DCKS,   1, 
                    Offset (0x08), 
                        ,   15, 
                    PMES,   1
                }

                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                {
                    Store (Package (0x10)
                        {
                            "AAPL,slot-name", 
                            "Built In", 
                            "name", 
                            "OnBoard Audio Controller", 
                            "model", 
                            "ALTEC Lansing ALC269-VB Sound System", 
                            "device_type", 
                            Buffer (0x11)
                            {
                                "Audio Controller"
                            }, 

                            "layout-id", 
                            Buffer (0x04)
                            {
                                 0x03, 0x00, 0x00, 0x00                         
                            }, 

                            "MaximumBootBeepVolume", 
                            Buffer (One)
                            {
                                 0x4D                                           
                            }, 

                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }, 

                            "PinConfigurations", 
                            Buffer (Zero){}
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }

.. though it gives LayOut-id=7 as we've known on ioreg. Boot-args: -lilubetaall -alcbeta. Thanks

AppleALC1.2.8_Lilu1.2.4.zip

bootlog_a43sj_r4542_SIP.zip

Edited June 15, 2018 by Badruzeus

MacPeet · June 15, 2018

hello @vandroiy2012

I have a new codec.

ALC257 - LayoutID 11 (0B) for Lenovo T480 or compatible

Resources_alc257_ID11.zip

can you please added the new codec?

and please this codec here...

https://www.insanelymac.com/forum/topic/311293-applealc-—-dynamic-applehda-patching/?do=findComment&comment=2616354

many thanks

Pavo · June 15, 2018

8 hours ago, Badruzeus said:

AppleALC v1.2.8 (built 3 days ago) is working fine here with SIP: Enabled under 10.14 Beta, as I can hear my Audio Output, my Input just works either. My audio Codec is Realtek ALC269-VB (10EC:0269), I leave Audio Inject within Clover config.plist=empty.. but just patcing DSDT with:

Reveal hidden contents



Device (HDEF)
            {
                Name (_ADR, 0x001B0000)  // _ADR: Address
                OperationRegion (HDAR, PCI_Config, 0x4C, 0x10)
                Field (HDAR, WordAcc, NoLock, Preserve)
                {
                    DCKA,   1, 
                    Offset (0x01), 
                    DCKM,   1, 
                        ,   6, 
                    DCKS,   1, 
                    Offset (0x08), 
                        ,   15, 
                    PMES,   1
                }

                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                {
                    Store (Package (0x10)
                        {
                            "AAPL,slot-name", 
                            "Built In", 
                            "name", 
                            "OnBoard Audio Controller", 
                            "model", 
                            "ALTEC Lansing ALC269-VB Sound System", 
                            "device_type", 
                            Buffer (0x11)
                            {
                                "Audio Controller"
                            }, 

                            "layout-id", 
                            Buffer (0x04)
                            {
                                 0x03, 0x00, 0x00, 0x00                         
                            }, 

                            "MaximumBootBeepVolume", 
                            Buffer (One)
                            {
                                 0x4D                                           
                            }, 

                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }, 

                            "PinConfigurations", 
                            Buffer (Zero){}
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }

.. though it gives LayOut-id=7 as we've known on ioreg. Boot-args: -lilubetaall -alcbeta. Thanks

AppleALC1.2.8_Lilu1.2.4.zip

bootlog_a43sj_r4542_SIP.zip

This is what I get in kernel.log when I set 0x67 in Clover config

2018-06-15 08:33:38.764533-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.789460-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.800490-0400 0x637      Debug       0x0                  0      0    kernel: (AppleSystemPolicy) Disabling CS_ENFORCEMENT for entitled process.
2018-06-15 08:33:38.807940-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.826884-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.845380-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.865927-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.886530-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.886978-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.887462-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.887937-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.888406-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.888861-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.889316-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.889769-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.904604-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.905024-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.905443-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.905859-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.906276-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.906692-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.907108-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.907524-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.907940-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.908354-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time
2018-06-15 08:33:38.908768-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.909183-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_protect can't have both write and exec at the same time
2018-06-15 08:33:38.909597-0400 0x527      Default     0x0                  0      0    kernel: CODE SIGNING: 131[coreaudiod] vm_map_lookup_locked can't have both write and exec at the same time

arsradu · June 16, 2018

On 6/15/2018 at 5:57 AM, Pavo said:

Anyone else try using latest 1.2.8 with SIP enabled on Mojave? It doesn't seem to work with SIP enabled.

Since I have sound with SIP enabled, I'd say it works.

Also, not sure why are we talking about a kernel log for 0x67 (SIP disabled) if the issue is with SIP enabled... I guess I'm missing something.

If we're talking about the latest latest AppleALC 1.2.8...meaning compiled with the latest changes... my guess is that it might also require the latest of Lilu kext (so 1.2.4), to work.

I compiled both. So if you wanna give it a try, they are both in the attachment. Everything works fine here.

[FILES REMOVED]

update: ok, something might be going on here. Cause I just lost sound for no apparent reason. JUST the sound itself. Icon in menu was still enabled. Everything looked to be perfectly fine. But just no actual sound. Got it back by rebuilding kernelcache... Hmmm..weird.

Anyway, switched back to previous kexts.

Edited June 19, 2018 by arsradu

Pavo · June 16, 2018

4 hours ago, arsradu said:

Since I have sound with SIP enabled, I'd say it works.

Also, not sure why are we talking about a kernel log for 0x67 (SIP disabled) if the issue is with SIP enabled... I guess I'm missing something.

If we're talking about the latest latest AppleALC 1.2.8...meaning compiled with the latest changes... my guess is that it might also require the latest of Lilu kext (so 1.2.4), to work.

I compiled both. So if you wanna give it a try, they are both in the attachment. Everything works fine here.

AppleALC & Lilu.zip

update: ok, something might be going on here. Cause I just lost sound for no apparent reason. JUST the sound itself. Icon in menu was still enabled. Everything looked to be perfectly fine. But just no actual sound. Got it back by rebuilding kernelcache... Hmmm..weird.

Anyway, switched back to previous kexts.

Yeah my bad that was a typo I meant to say when csrconfig was set as 0x0, same thing happens to me also, icon is there device ioreg looks normal but you can't open Sound under System Preferences and things lock up. I don't know why you got it back rebuilding kernel cache, shouldn't the kernel cache already be good since everything is being injected by Clover?

arsradu · June 16, 2018

11 minutes ago, Pavo said:

Yeah my bad that was a typo I meant to say when csrconfig was set as 0x0, same thing happens to me also, icon is there device ioreg looks normal but you can't open Sound under System Preferences and things lock up. I don't know why you got it back rebuilding kernel cache, shouldn't the kernel cache already be good since everything is being injected by Clover?

Should... apparently wasn't. :))

Weird thing is that, even after putting back all kexts and setting config to 0x3 (which, as I'm sure you know, it's "partially" disabled, or custom config)...well, I still had no sound.

Edited June 16, 2018 by arsradu

Pavo · June 16, 2018

2 minutes ago, arsradu said:

Should... apparently wasn't. :))

So... just did a test and did a re-install with SIP enabled and the same thing happens. Don't think its a Clover issue maybe hooking issue from the driver itself. Still investigating.

sanmane · June 18, 2018

Hey y'all. Having trouble with ALC1150 on Mojave with the latest build posted. Have the volume slider in the menu bar, but no devices besides AirPlay. Using the default AppleHDA kext (I think... I did mess with it and had to download a new one off some other forum but if someone else could provide just to be sure that would be nice). Also using inject 1. Any help is appreciated. Attached config and some screenshots.

516667337_ScreenShot2018-06-17at11_59_07PM.png.26c7fb917426a299a145d07bfb940ed9.png

Edited June 18, 2018 by sanmane

rexx0520 · June 18, 2018

Hello.

I have ALC236 with codec 13.

I couldn't have the sound work properly every time on boot or awaken without the code below executed. (CodecCommander is installed)

hda-verb 0x19 SET_PIN_WIDGET_CONTROL 0x25
hda-verb 0x14 SET_EA 0x02

With the current version of AppleALC (CodecCommander is now built-in) and removed CC from L/E, the code does not work anymore.

Inserting the code into the Custom Command section of CC will not work, still can't figure the reason out. (Or maybe I missed something or insert the command in a wrong way)

Is there anything to do with CC or appleALC to solve the problem? Thanks.

arsradu · June 18, 2018

2 hours ago, sanmane said:

Hey y'all. Having trouble with ALC1150 on Mojave with the latest build posted. Have the volume slider in the menu bar, but no devices besides AirPlay. Using the default AppleHDA kext (I think... I did mess with it and had to download a new one off some other forum but if someone else could provide just to be sure that would be nice). Also using inject 1. Any help is appreciated. Attached config and some screenshots.

Well, by the looks of it, you've patched the {censored} out of the poor AppleHDA kext. :)) AppleALC.kext needs the vanilla/untouched/unmodified AppleHDA, in order to work.

Also, I know this is your first post on this forum, but one of the things you do when you post your config, is clean it up of any serials in SMBIOS.

Also, an ioreg would help a lot. And for a better overview, I would suggest uploading the entire Clover folder.

kext-dev-mode=1 and rootless=0 are obsolete probably since El Capitan.

If you have custom DSDT files in Clover/ACPI/patched, please, remove them.

I cleaned your config a little bit and changed a few things here and there. If you want, give it a try.

If you still wanna keep the one you have, make a backup of it. Then replace it with the attached one. I also removed the serials from SMBIOS. You can remove the attachment from your post.

Also, AppleALC builds posted here are experimental/for test purposes only.

Official builds can be downloaded from the official github here: https://github.com/vit9696/AppleALC/releases

Please, keep in mind that, for Mojave, you need at least AppleALC 1.2.8 (which hasn't been officially released yet).

config.plist.zip

Edited June 18, 2018 by arsradu

sanmane · June 18, 2018

8 hours ago, arsradu said:

Well, by the looks of it, you've patched the {censored} out of the poor AppleHDA kext. :)) AppleALC.kext needs the vanilla/untouched/unmodified AppleHDA, in order to work.

Also, I know this is your first post on this forum, but one of the things you do when you post your config, is clean it up of any serials in SMBIOS.

Also, an ioreg would help a lot. And for a better overview, I would suggest uploading the entire Clover folder.

kext-dev-mode=1 and rootless=0 are obsolete probably since El Capitan.

If you have custom DSDT files in Clover/ACPI/patched, please, remove them.

I cleaned your config a little bit and changed a few things here and there. If you want, give it a try.

If you still wanna keep the one you have, make a backup of it. Then replace it with the attached one. I also removed the serials from SMBIOS. You can remove the attachment from your post.

Also, AppleALC builds posted here are experimental/for test purposes only.

Official builds can be downloaded from the official github here: https://github.com/vit9696/AppleALC/releases

Please, keep in mind that, for Mojave, you need at least AppleALC 1.2.8 (which hasn't been officially released yet).

config.plist.zip

I'll give it a try, can you provide or link me to a vanilla AppleHDA kext? As for AppleALC I'm on that 1.2.8v2 you posted.

Edit: That config initially wouldn't boot, added -lilubetaall and seems to be good now. Still no audio, probably need a clean AppleHDA.

Edited June 18, 2018 by sanmane

arsradu · June 18, 2018

1 hour ago, sanmane said:

I'll give it a try, can you provide or link me to a vanilla AppleHDA kext? As for AppleALC I'm on that 1.2.8v2 you posted.

Edit: That config initially wouldn't boot, added -lilubetaall and seems to be good now. Still no audio, probably need a clean AppleHDA.

Here you go.

You can choose your preferred method of installation. Or you can do this:

sudo -s
[password]
rm -R -v /System/Library/Extensions/AppleHDA.kext
cp -R -v ~/Desktop/AppleHDA.kext /System/Library/Extensions/AppleHDA.kext
rm -R -v /System/Library/Caches/com.apple.kext.caches/Startup/*

Then reboot.

AppleHDA.kext.zip

Edit: please wait

Edit2: try now.

Edited June 18, 2018 by arsradu

sanmane · June 18, 2018

23 minutes ago, arsradu said:
Here you go.

You can choose your preferred method of installation. Or you can do this:
sudo -s
[password]
rm -R -v /System/Library/Extensions/AppleHDA.kext
cp -R -v ~/Desktop/AppleHDA.kext /System/Library/Extensions/AppleHDA.kext
rm -R -v /System/Library/Caches/com.apple.kext.caches/Startup/*
Then reboot.

AppleHDA.kext.zip

Edit: please wait

Edit2: try now.

Rebooting now, but here's IOreg... https://nofile.io/f/qQ1Dhofy6nQ/iMac.ioreg (over 10mb)

arsradu · June 18, 2018

3 minutes ago, sanmane said:

Rebooting now, but here's IOreg... https://nofile.io/f/qQ1Dhofy6nQ/iMac.ioreg (over 10mb)

I guess you used one of the newer (apparently not better) versions of IORegistryExplorer which tend to corrupt the result.

Could you please, try again, with the attached IORegistryExplorer?

IORegistryExplorer.zip

Edited June 18, 2018 by arsradu

sanmane · June 18, 2018

3 minutes ago, arsradu said:

I guess you used one of the newer (apparently not better) versions of IORegistryExplorer which tend to corrupt the result.

Could you please, try again, with the attached IORegistryExplorer?

IORegistryExplorer.zip

Odd, give that a try. Also... didn't seem to work with that AppleHDA, I tried both inject 1 and 7.

sanmaneiMac.ioreg

AppleALC — dynamic AppleHDA patching

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites