JijiTheFox Posted February 16, 2016 Share Posted February 16, 2016 Hi All,Been a while since I've been around the hackintosh scene, been happily sitting with mountain lion for a few years, no need to update until now. Updated to El Capitan and back down to Yosemite (Audio interface drivers aren't supported on El Capitan, will be replacing it soon though!)I've installed a vanilla Yosemite with Clover and I need to learn how to get my Intel HD 3000 graphics supported, I used to use chameleon bootloader, which helped me sort it before.I've searched over the net on a few forums the last few days, I've tried a few kext replacements to not much look. Going to play with Clover configurator later to create and make a the plist.I've steered clear of DSDT, never used them before. Would I need one now just for the graphics issue, all my other hardware is flawless now.My mobo is ASUS P8z68-V LXMy CPU is Intel i5-2500kI connect DVI and HDMI dual monitor to my system, currently it's mirrored at a low resolution and the system thinks it's Intel HD 2000 with roughly 6mb.I'm away from home for a few hours but will do my best to look into whatever I can..Any help would be much appreciatedJiJi Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 19, 2016 Author Share Posted February 19, 2016 Update:I've managed to get full resolution via editing the config.plist for clover,(I copied settings from another thread, SMBIO is now Mac Mini 2011, Inject Intel etc.)This has given me Intel HD 2000 512mb.I'd still like to get to HD 3000 so I can use final cut pro, possibly enable transparency on the menu bar. Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 19, 2016 Author Share Posted February 19, 2016 I've gotten MaciASL and a copy of my DSDTI'm looking at this patch here http://www.insanelymac.com/forum/topic/298518-cant-get-hd3000-to-work-on-installed-yosemite/?do=findComment&comment=2047648I've opened my DSDT, not sure how to add this patch in.. Link to comment Share on other sites More sharing options...
Allan Posted February 20, 2016 Share Posted February 20, 2016 I've opened my DSDT, not sure how to add this patch in.. See this: DSDT/SSDT: Basic knowledge DSDT/SSDT: Edit using MacIASL DSDT/SSDT: Common DSDT patches Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 21, 2016 Author Share Posted February 21, 2016 See this: DSDT/SSDT: Basic knowledge DSDT/SSDT: Edit using MacIASL DSDT/SSDT: Common DSDT patches Hi Allan Many thanks for the link, I've patched my DSDT (generated it via Clover) and it has made no difference. I'm out of ideas with Intel Hd3000 and clover. Link to comment Share on other sites More sharing options...
Allan Posted February 21, 2016 Share Posted February 21, 2016 Upload your config.plist and DSDT here in the topic, please. Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 21, 2016 Author Share Posted February 21, 2016 Config https://www.dropbox.com/s/4v9c5qvc8t6mmwu/config.plist?dl=0DSDT https://www.dropbox.com/s/k5cq4ifn4ozjbvw/DSDT.aml?dl=0(I couldn't find the attachment button) Link to comment Share on other sites More sharing options...
gengik84 Posted February 21, 2016 Share Posted February 21, 2016 try this config without dsdt To attach, click --->"'more reply options ", upload compressed files config.plist.zip Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 22, 2016 Author Share Posted February 22, 2016 try this config without dsdt To attach, click --->"'more reply options ", upload compressed files Thanks GengiK, I tried this late last night but received AppleIntelCPU Kernel panic, tried again enabling the AppleIntel patch within Clover but couldn't get it to work. What's odd was, even though I was using your plist, my theme stayed consistent and didn't revert to original. I'll try again tonight when I'm home and keep you posted. UPDATE: I've tried to boot twice with your plist, then I opened it up with PlistPro, and realised it has downloaded corrupt.. I've redownloaded and still no luck, Could you possibly re-upload please? Link to comment Share on other sites More sharing options...
gengik84 Posted February 22, 2016 Share Posted February 22, 2016 No problem Try downloading again, post 8 Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 22, 2016 Author Share Posted February 22, 2016 Thanks for the help Gengik84Your config.plist actually booted slightly quicker than mine, which is cool. The system profiler is still saying Intel HD 2000, however it's 512mb resolutions and transparency are running fine, that is more than fine with me. HD3000 is 512mb anyway with 8gb RAM I believe, so am I correct in assuming this wouldn't make significant difference if Mac saw as HD2000 or HD3000? Link to comment Share on other sites More sharing options...
Allan Posted February 22, 2016 Share Posted February 22, 2016 IMHO, this is aesthetic info. 1 Link to comment Share on other sites More sharing options...
gengik84 Posted February 22, 2016 Share Posted February 22, 2016 I agree with @Allan... now the graphics are recognized in the right way. the rest ... just cosmetic ... The important thing is that it works... Link to comment Share on other sites More sharing options...
Allan Posted February 22, 2016 Share Posted February 22, 2016 Just a note: Others users with HD 3000 + Yosemite, has the same problem, look: http://www.insanelymac.com/forum/topic/298518-cant-get-hd3000-to-work-on-installed-yosemite/?p=2090693 Link to comment Share on other sites More sharing options...
gengik84 Posted February 22, 2016 Share Posted February 22, 2016 Just a note: Others users with HD 3000 + Yosemite, has the same problem, look: http://www.insanelymac.com/forum/topic/298518-cant-get-hd3000-to-work-on-installed-yosemite/?p=2090693 I did not know ...... however, I gave some advice, I hope it helps them too... Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 22, 2016 Author Share Posted February 22, 2016 Thank you both for your help, Final cut pro says minimum requirements are Intel hd3000 and it runs fine. I never cared for HDMI audio as I have an audio interface that works with Yosemite ( but not El Capitan, its support is discontinued.) Thanks again 2 Link to comment Share on other sites More sharing options...
Allan Posted February 22, 2016 Share Posted February 22, 2016 Hey, enable HDMI audio in HD 3000 is a good challenge. If you want, i can try edit a DSDT for you What is your Audio Codec, and layout? 1 Link to comment Share on other sites More sharing options...
JijiTheFox Posted February 23, 2016 Author Share Posted February 23, 2016 Hi Allan,Apologies if this is a silly question,How would I find these out? Link to comment Share on other sites More sharing options...
Allan Posted February 24, 2016 Share Posted February 24, 2016 How would I find these out? The audio codec? See here: Guide to patch AppleHDA for your codec Link to comment Share on other sites More sharing options...
JijiTheFox Posted March 10, 2016 Author Share Posted March 10, 2016 Hi Allan, Apologies of the delay, been away from the computer or my house recently, busy times.Thanks for the guide, I'll look into this tonight and see what I can procure Update: Had a harddrive failure. Harddrive was FUBAR, replaced it, installed Yosemite back to how it was, will try and play when I can to sort the codec out. 1 Link to comment Share on other sites More sharing options...
Recommended Posts