Jimmy Mallmann Posted February 9, 2016 Share Posted February 9, 2016 System Configuration: CPU: Intel Core i5-3330 @ 3GHZ GPU: Zotac® GeForce® GTX 650TI RAM: 16GB Kingston® DDR3-1333 Hard Drive: 2x HD Kingston SSD Now V300 SV300S37A 240GB 2.5" PIONEER DVD-RW DVR-212D Apple Keyboard with Numeric Keypad SMBIOS set to MacPro3,1 (iMac 13,2 works too) Install Procedure: -> Create the USB Install Disk, add Clover Boot Loader to it, with the options: ACPI: FixShutdown BOOT: darkwake, dart=0, nv_disable=1, kext-dev-mode=1 Kernel and Kext Patches: AsusAICPUPM , AppleRTC , KernelPM SMBIOS: MacPro3,1 DRIVERS UEFI 64BIT: CsmVideoDxe, OsxAptioFix2Drv and VBoxHfs EXTRA DRIVERS: OsxFatBinaryDrv UEFI INSTALLER KEXTS: 1) Install AppleIntelE1000e.kext ( to EFI > CLOVER > kexts > 10.11 ) 3) Install FakeSMC.kext ( to EFI > CLOVER > kexts > 10.11 ) Install and Reboot, Boot again the USB Install, but choose the newly installed Hard Drive. Post Install: -> Install Clover to the Current Hard Drive with the following options: ACPI: FixShutdown BOOT: darkwake, dart=0, nvda_drv=1, kext-dev-mode=1 SMBIOS: MacPro3,1 DRIVERS UEFI 64BIT: CsmVideoDxe, OsxAptioFix2Drv and VBoxHfs EXTRA DRIVERS: OsxFatBinaryDrv UEFI SYSTEM KEXTS: 1) Install Realtek ALC892 with audio_cloverALC-110_v1.0o10 2) Install AppleIntelE1000e.kext ( to EFI > CLOVER > kexts > 10.11 ) 3) Install FakeSMC.kext ( to EFI > CLOVER > kexts > 10.11 ) 4) TRIM: Open Terminal, “ sudo trimforce enable ”, will ask you to accept, then reboot. In order to check if it is working, after reboot type in the Terminal " system_profiler SPSerialATADataType | grep 'TRIM' " 5) Install NVIDIA® Web Driver for OSX ® for 10.11.2 or Install NVIDIA® Web Driver for OSX ® for 10.11.3 Done! (or should be) Link to comment Share on other sites More sharing options...
Recommended Posts