Jump to content

El Capitan - Can't get it to install


Antonio95
 Share

15 posts in this topic

Recommended Posts

Hello everybody,

I have a Toshiba Satellite C660 with this hardware:

 

- CPU Intel i5 2410M

- Chipset: HM65

- NVIDIA GeForce 315M

 

 

I've tried to install OS X 10.11 with no luck. I've prepared everything following the guide and using Clover Legacy as bootloader. Whenever I try to boot from USB with "-v" it hangs with an underscore for a while after I select the USB to boot from. After about 1 minute it starts loading stuff but it won't go after that. It keeps displaying something new occasionally but after 10 minutes it hangs on "Waiting for DSMOS...". It seems something related with FakeSMC.kext but it's already on "EFI/CLOVER/kexts/Other". I don't know what to do. I hope someone will be wanting to help me :)

post-579997-0-60076500-1454760497_thumb.jpg

Link to comment
Share on other sites

Update: I've created again the USB installation and I've tried with the artur_pt suggestion. Booted and kernel panic for something related to CPU. So I've booted with cpus=1 and after long wait before installation screen (is that normal?) it made the trick! At the moment the OS is being installed. I'll keep you updated. Will I have to boot always with cpus=1? Thank you to chris too! :)

Link to comment
Share on other sites

Hello artur_pt

huge thank you for your support but it keeps not working, I'm not sure but it seems like it's not loading the kext at boot because I can't see it. I've tried to install the kext with Easykext Utility and Kext Wizard but no luck. I don't understand if it is not working or it doesn't load at all.

Link to comment
Share on other sites

I can see only this:

 

   36    3 0xffffff7f80ee7000 0xb000     0xb000     org.rehabman.voodoo.driver.PS2Controller (1.8.21) 3097AA12-0801-377B-8A90-2EC609E7C1B1 <11 7 5 4 3 1>
   38    0 0xffffff7f82ec4000 0xa000     0xa000     org.netkas.FakeSMC (4.2.0) 3F845012-1197-3BCE-BEED-CBA6EB592341 <11 7 5 4 3>
   52    0 0xffffff7f80f0b000 0x6000     0x6000     org.rehabman.voodoo.driver.PS2Keyboard (1.8.21) 57FD5E5A-8305-3DA9-BE92-25535CD4FEDB <36 34 7 6 5 4 3 1>
   53    0 0xffffff7f80ef5000 0xc000     0xc000     org.rehabman.voodoo.driver.PS2Trackpad (1.8.21) 46F77C9A-BE46-36CB-A335-5C541A534583 <36 34 7 6 5 4 3 1>
   54    0 0xffffff7f80f05000 0x4000     0x4000     org.rehabman.voodoo.driver.PS2Mouse (1.8.21) 1B6A781E-B0D5-337E-9874-B52FC5669602 <36 34 5 4 3>
Link to comment
Share on other sites

hello

 

yes is not load .. check the kext install ...

 

u can try also load the kext in the terminal

 

enable the right kext permissions then

 

kextload and grab the kext to the terminal

 

good hack

Link to comment
Share on other sites

 Share

×
×
  • Create New...