komil Posted January 21, 2016 Share Posted January 21, 2016 Hello everybody,I'm new to both Mac and Hackintosh so please be gentle. I've installed OS X Maverics and I can use it only in safe mode (-x). Otherwise, starting hangs indefinitely. When I do the -v it hangs after "Missing Bluetooth Controller Transport..." (I've attached the image). I've read that this has most probably something to do with the graphics as that comes after the bluetooth. I've tried all the available suggested workarounds for the Intel 4600 ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] also has some fixes) but nothing works for me. The fact that I don't undertstand thoses fixes doesn't help either My monitor is connected as SVGA, don't know if that could be the issue? I don't get the black screen though, the booting up hangs. In safe mode, the network works properly, not much else (there is graphics but the resolution is quite low and videos flicker). No graphics kext loaded in safe mode.My hardware is:Intel Core i7 4790Gigabyte GA-Z97-HD3CORSAIR 16GB (2x8GB) Vengeance DDR3 1600MHz CL10 KITSamsung SSD 250GB 850 EVOWestern Digital 2TB SATA3 Black (OS X is here) Link to comment Share on other sites More sharing options...
carbo178 Posted January 21, 2016 Share Posted January 21, 2016 http://www.insanelymac.com/forum/rules/ http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/ Link to comment Share on other sites More sharing options...
komil Posted January 21, 2016 Author Share Posted January 21, 2016 What are you trying to say carbo178? I've read the rules. The second issue I didn't know before, but it kind of took itself automatically and it's not that important to my question anyway. Link to comment Share on other sites More sharing options...
carbo178 Posted January 22, 2016 Share Posted January 22, 2016 I only asked to read rules, especially concerning Tonymac.For your graphics problem try changing monitor connection, use HDMI or DVI I think you have installed Clover bootloader, post the EFI folder Link to comment Share on other sites More sharing options...
komil Posted January 22, 2016 Author Share Posted January 22, 2016 For your graphics problem try changing monitor connection, use HDMI or DVI I can use DVI only in analog mode, by buying a DVI-SVGA converter. Is that worth trying or is it the same as board's SVGA output? Link to comment Share on other sites More sharing options...
carbo178 Posted January 22, 2016 Share Posted January 22, 2016 The converter you use not always is the solution, you have the converter plugged in motherboard DVI port, right? If your monitor have only VGA connection try using a TV via HDMI Try also disabling VT-d in the bios Link to comment Share on other sites More sharing options...
komil Posted January 24, 2016 Author Share Posted January 24, 2016 Tried the adapter idea. I cannot use the adapter, the DVI port is strictly digital. But as I said, I don't get a black screen, the OS doesn't boot so it's more than the port. But! It's definitely the graphics. I manually removed some graphics kexts and the OS boots fine, just like in Safe Mode (without any kexts loaded). Disabling VT-d didn't change anything. I'm guessing buying a cheap second hand graphics card is my solution. Any suggestions? I'm seeing GeForce GT220 DDR2 512MB on my local ads, and it seems to work with Hackintosh based on some forum feedback. Link to comment Share on other sites More sharing options...
carbo178 Posted January 24, 2016 Share Posted January 24, 2016 You have to inject FB for HD4600 in config.plist and restore graphics kext Link to comment Share on other sites More sharing options...
komil Posted January 24, 2016 Author Share Posted January 24, 2016 I'm sorry, I'm not following you. How would I do that and why? What would that do. I presume FB means framebuffer but I still don't get anything. Link to comment Share on other sites More sharing options...
komil Posted January 27, 2016 Author Share Posted January 27, 2016 I bought a used GeForce GT 210 for 20eur and it works out of the box with my Hacintosh. Problem solved! Link to comment Share on other sites More sharing options...
Recommended Posts