Jump to content

[Solved] El Capitan Clover UEFI on Asus P53SJ


Kaya80
 Share

14 posts in this topic

Recommended Posts

Hi guys, i really would like to installa dual boot on this laptop, but i'm having a lot of problems to reach the installation screen, due to an issue maybe with Nvida GT520....DSMOS has arrived, and before on the verbose some error regarding nvidia initialization.....

 

My specs are:

Intel i5 2410

intel HD3000 + GT520m

Atheros AR5B25

 

Can you help please?

there's my config

config 2.7z

Link to comment
Share on other sites

Ok, let you know if it works, thanks

 

 

Ok, perfect Gengik, at first try i reach installer with this config....now i'm going to install....i update you later, thanks again

 

 

I'm going crazy, really crazy, i don't know why but, overtime i make USB installer with this guide http://www.insanelymac.com/forum/topic/307003-clover-os-x-el-capitan-usb/, every setting i choose, every boot loader i try to install, he gave always Clover v3320 instead of v3330 that i install, and no traces after reboot of my config that make the installer to start...i can see that very time the boot loader create a EFI backup folder with v3330 backup, and reset boot loader with v3320 and all settings are wrong....really crazy

 

Update: the only way to install OS X on this laptop is with Clover in Legacy mode, but i have a lot of problem regarding where to put the config.plist in legacy mode, EFI partition is empty, the only config i find is in the INSTALLER i create, in the EFI folder, but even if i replace with your config, try to boot and your config is not loaded....:(there's something wrong in what i do, and i don't know where

Link to comment
Share on other sites

Ok, the problem was that i didn't erase my internal Hdd at all, there was a trace of the old installation, that's why!!

Installed the system successfully, now begin the hard work with kext

 

Touchpad Ok, with Smart Touchpad 4.5 kext, battery ok with the same kexts you post in Acer section, Wifi and Blluetooth working, Half-mini PCI AR9285

I miss only audio, Realtek HD Audio ALC269, read it from Windows, but when i try to reveal Audio ID on AppleHDA Patcher, the app tells me no codec found, no AppleHDA installed, really stramge...can you help me please?

Link to comment
Share on other sites

Hi, If you have installed AppleHDA patched, you have to insert the layout = 3 on config.plist. and to add security FixHda.

Otherwise, you can do the same thing on dsdt.
You should then repeat each test carefully.
To know exactly the audio codec, you should make a codec dump with linux
Link to comment
Share on other sites

Update: the only way to install OS X on this laptop is with Clover in Legacy mode, but i have a lot of problem regarding where to put the config.plist in legacy mode, EFI partition is empty, the only config i find is in the INSTALLER i create, in the EFI folder, but even if i replace with your config, try to boot and your config is not loaded....:(there's something wrong in what i do, and i don't know where

 

for UEFI

  • Bios settings
    • Enable UEFI Boot
    • Disable Intel Virtualization
    • Disable VT-D
    • Add New Boot option for post install of OS X and clover
      • Name: Clover
      • Disk: Select the drive with Clover and OS X installed
      • Path type "EFI\Boot\Bootx64.efi"
  • Create Clover UEFI USB OS X installer
    • "EmuVariableUefi-64.efi" driver required
Link to comment
Share on other sites

  • 6 months later...
 Share

×
×
  • Create New...