dodvip123 Posted May 17, 2016 Share Posted May 17, 2016 Intel Unknown fixed in latest Clover 3530, going to test as soon as it's available. https://sourceforge.net/p/cloverefiboot/tickets/235/ Link to comment Share on other sites More sharing options...
Paradoxxx_1337 Posted May 18, 2016 Share Posted May 18, 2016 @wen1 Watch this : now I'm reformatted my envy. firstly loaded config.plist and then kext intel fakeid. my hdmi working perfectly. checkout again at the attachment. You just used your config and which kext exactly ? I have issues here with low brightness, when moving the windows I cannot see qnyhing inside any longer, and no transparency. Could you please explain the steps in a more detailed way? Link to comment Share on other sites More sharing options...
Mikoman Posted May 18, 2016 Author Share Posted May 18, 2016 Hey guys, which driver do you use for touchpad? I just tested mine and after update to 10.11.5 i lost my ability to click. I am using applePS2Controller with AppleACPIPS2Nub kext. Link to comment Share on other sites More sharing options...
Paradoxxx_1337 Posted May 18, 2016 Share Posted May 18, 2016 Oh wow, I finally got everything working properly but brightness. Is there anyway to force full brightness ? Link to comment Share on other sites More sharing options...
wen1 Posted May 18, 2016 Share Posted May 18, 2016 Hey guys, which driver do you use for touchpad? I just tested mine and after update to 10.11.5 i lost my ability to click. I am using applePS2Controller with AppleACPIPS2Nub kext. I have not updated to 10.11.5 yet but I am using the VoodooPS2Controller.kext attached from the Clover\Kexts\10.11 folder on the EFI partition. Also, gives me tap to click option and inertia scrolling etc. Oh wow, I finally got everything working properly but brightness. Is there anyway to force full brightness ? A DSDT edit might give us the brightness control. I have not attempted it. But i did attach the DSDT without this fix earlier. I have to spend some time attempting the brightness fix on that. VoodooPS2Controller.kext.zip Link to comment Share on other sites More sharing options...
Mikoman Posted May 31, 2016 Author Share Posted May 31, 2016 I have not updated to 10.11.5 yet but I am using the VoodooPS2Controller.kext attached from the Clover\Kexts\10.11 folder on the EFI partition. That worked well. Thanks PS: anyone tried some different wifi module? I have not spare one at the moment but i would like to know if there is any blacklist for wifi modules. I am thinking about replacing it for some OSX compatible one. Link to comment Share on other sites More sharing options...
wen1 Posted June 1, 2016 Share Posted June 1, 2016 That worked well. Thanks PS: anyone tried some different wifi module? I have not spare one at the moment but i would like to know if there is any blacklist for wifi modules. I am thinking about replacing it for some OSX compatible one. would love to replace the internal WiFi card I extracted the bios in hopes of modding it but does not seem to be possible. There is a huge white list though. Have not found one that would be osx compatible. There are a few atheros and Broadcom cards on the list but those specific ones don't seem to work well in osx there are many mini PCI cards in the whitefish but unfortunately our socket is m.2 ngff type will try to post the list of white list cards Link to comment Share on other sites More sharing options...
wen1 Posted June 8, 2016 Share Posted June 8, 2016 Looks like we lost a whole bunch of posts. refersh-it, Any luck in getting the device id screen shot or bios files? Thanks for your help Link to comment Share on other sites More sharing options...
Mikoman Posted June 9, 2016 Author Share Posted June 9, 2016 nope. its gone :/ Link to comment Share on other sites More sharing options...
wen1 Posted June 9, 2016 Share Posted June 9, 2016 nope. its gone :/ You mean the posts are gone? Seems like might have restored a backup from previous week. The site was having issues over the last few days Link to comment Share on other sites More sharing options...
Refresh-IT Posted June 9, 2016 Share Posted June 9, 2016 Looks like we lost a whole bunch of posts. refersh-it, Any luck in getting the device id screen shot or bios files? Thanks for your help its here. i think its same as yours.. check it pls dpci.tiff bios.zip Link to comment Share on other sites More sharing options...
wen1 Posted June 10, 2016 Share Posted June 10, 2016 its here. i think its same as yours.. check it pls its here. i think its same as yours.. check it pls Thanks for posting this. I compared the bios files, they are identical. I am assuming you do not get any errors/warnings during boot up. Wonder why mine is not allowing me to get to even clover screen with the wireless card installed Edit: Reattaching the error I get. Wireless module not supported. System halted 1 Link to comment Share on other sites More sharing options...
Refresh-IT Posted June 10, 2016 Share Posted June 10, 2016 Thanks for posting this. I compared the bios files, they are identical. I am assuming you do not get any errors/warnings during boot up. Wonder why mine is not allowing me to get to even clover screen with the wireless card installed Edit: Reattaching the error I get. Wireless module not supported. System halted I have too this error message. if i push wireless module socket at boot, pc starts up normally. Not working normally. Ok? Link to comment Share on other sites More sharing options...
wen1 Posted June 10, 2016 Share Posted June 10, 2016 I have too this error message. if i push wireless module socket at boot, pc starts up normally. Not working normally. Ok? Got it now. Sorry did not realize that's what you meant when you first said it. When you push on the module, it is probably not detecting it properly and hence lets it go past the error. I wonder if there is pin that we can cut out on the card to get past this message. I have seen similar mods done before. Link to comment Share on other sites More sharing options...
Refresh-IT Posted June 10, 2016 Share Posted June 10, 2016 Got it now. Sorry did not realize that's what you meant when you first said it. When you push on the module, it is probably not detecting it properly and hence lets it go past the error. I wonder if there is pin that we can cut out on the card to get past this message. I have seen similar mods done before. Maybe pin 3 (+3.3v for bluetooth) im not sure. I think cuting the way then solder a button. But warranty is important for me. And pin ways microscopic. Is it possible for you? Thanks Link to comment Share on other sites More sharing options...
Refresh-IT Posted June 10, 2016 Share Posted June 10, 2016 Wen1 is your hdmi working?(sound) Link to comment Share on other sites More sharing options...
wen1 Posted June 10, 2016 Share Posted June 10, 2016 Maybe pin 3 (+3.3v for bluetooth) im not sure. I think cuting the way then solder a button. But warranty is important for me. And pin ways microscopic. Is it possible for you? Thanks Thinking of trying it on the card itself Not the laptop You can easily replace it if it broke I will take a look at it tomorrow Wen1 is your hdmi working?(sound) My monitor does not have speakers Let me try it on another Link to comment Share on other sites More sharing options...
Refresh-IT Posted June 11, 2016 Share Posted June 11, 2016 Thinking of trying it on the card itself Not the laptop You can easily replace it if it broke I will take a look at it tomorrow My monitor does not have speakers Let me try it on another You'r right. Link to comment Share on other sites More sharing options...
edex96 Posted June 12, 2016 Share Posted June 12, 2016 @Refresh-IT Did you benchmark your 530 if its not, can you do test and post it here. I have 6700HQ same as yours and I did install the kext and the config that you shared up there but nothing changed. Can you please write down exactly what steps did you follow to make your intel HD 530 work.(I think you have sound problem over HDMI) Link to comment Share on other sites More sharing options...
Refresh-IT Posted June 12, 2016 Share Posted June 12, 2016 @edex96 Did you have a same laptop? Hp envy 17-n** Link to comment Share on other sites More sharing options...
Refresh-IT Posted June 20, 2016 Share Posted June 20, 2016 Here of benchmarks Link to comment Share on other sites More sharing options...
Rasstar Posted June 22, 2016 Share Posted June 22, 2016 Would be great if there was a guide. 1 Link to comment Share on other sites More sharing options...
xerano Posted August 20, 2016 Share Posted August 20, 2016 its some time ago since ive tried to install mac osx on my Acer Skylake Notebook maybe someone can help me to refresh my mind Ive created a Clover 3716 USB Stick with latest Sierra Public Beta in my EFI Folder i have created under Kexts a 10.12 Folder and inserted 3 kexts: AHCI_3rd_party_SATA.kext USBInjectAll.kext FakeSMC.kext my Config.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>ACPI</key> <dict> <key>DSDT</key> <dict> <key>Debug</key> <false/> <key>DropOEM_DSM</key> <false/> <key>Fixes</key> <dict> <key>AddDTGP_0001</key> <true/> <key>FixHDA_8000</key> <true/> <key>FixHPET_0010</key> <true/> </dict> <key>Name</key> <string>DSDT.aml</string> <key>ReuseFFFF</key> <false/> </dict> <key>DropTables</key> <array> <dict> <key>Signature</key> <string>DMAR</string> </dict> <dict> <key>Signature</key> <string>SSDT</string> <key>TableId</key> <string>Cpu0Ist</string> </dict> <dict> <key>Signature</key> <string>SSDT</string> <key>TableId</key> <string>CpuPm</string> </dict> </array> <key>HaltEnabler</key> <true/> <key>SSDT</key> <dict> <key>DropOem</key> <false/> <key>EnableC6</key> <true/> <key>Generate</key> <true/> </dict> </dict> <key>Boot</key> <dict> <key>Arguments</key> <string>-v dart=0 nv_disable=1 kext-dev-mode=1 PCIRootUID=0</string> <key>Debug</key> <false/> <key>DefaultVolume</key> <string>LastBootedVolume</string> <key>Legacy</key> <string>PBR</string> <key>Secure</key> <false/> <key>Timeout</key> <integer>3</integer> <key>XMPDetection</key> <false/> </dict> <key>CPU</key> <dict> <key>UseARTFrequency</key> <false/> </dict> <key>Devices</key> <dict> <key>FakeID</key> <dict> <key>ATI</key> <string>0x0</string> <key>IMEI</key> <string>0x0</string> <key>IntelGFX</key> <string>0x0</string> <key>LAN</key> <string>0x0</string> <key>NVidia</key> <string>0x0</string> <key>SATA</key> <string>0x0</string> <key>WIFI</key> <string>0x0</string> <key>XHCI</key> <string>0x0</string> </dict> <key>USB</key> <dict> <key>AddClockID</key> <true/> <key>FixOwnership</key> <true/> <key>Inject</key> <true/> </dict> </dict> <key>DisableDrivers</key> <array> <string>Nothing</string> </array> <key>GUI</key> <dict> <key>Hide</key> <array> <string>\EFI\BOOT\BOOTX64.EFI</string> </array> <key>Language</key> <string>en:0</string> <key>Mouse</key> <dict> <key>DoubleClick</key> <integer>500</integer> <key>Enabled</key> <true/> <key>Mirror</key> <false/> <key>Speed</key> <integer>8</integer> </dict> <key>Scan</key> <dict> <key>Entries</key> <true/> <key>Legacy</key> <string>First</string> <key>Linux</key> <false/> <key>Tool</key> <true/> </dict> <key>ScreenResolution</key> <string>1920x1080</string> <key>Theme</key> <string>bootcamp</string> </dict> <key>Graphics</key> <dict> <key>DualLink</key> <integer>1</integer> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <true/> <key>NVidia</key> <false/> </dict> <key>NvidiaSingle</key> <false/> <key>ig-platform-id</key> <string>0x191B0000</string> </dict> <key>KernelAndKextPatches</key> <dict> <key>AppleRTC</key> <true/> <key>AsusAICPUPM</key> <false/> <key>Debug</key> <false/> <key>KernelCpu</key> <false/> <key>KernelHaswellE</key> <false/> <key>KernelLapic</key> <false/> <key>KernelPm</key> <true/> <key>KextsToPatch</key> <array> <dict> <key>Disabled</key> <false/> <key>Find</key> <data> wegQD7bw </data> <key>Name</key> <string>AppleAPIC</string> <key>Replace</key> <data> vhEAAACQ </data> </dict> <dict> <key>Comment</key> <string>External icons patch</string> <key>Disabled</key> <false/> <key>Find</key> <data> RXh0ZXJuYWw= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> SW50ZXJuYWw= </data> </dict> </array> </dict> <key>RtVariables</key> <dict> <key>BooterConfig</key> <string>0x28</string> <key>CsrActiveConfig</key> <string>0x67</string> </dict> <key>SMBIOS</key> <dict> <key>BiosReleaseDate</key> <string>09/22/2015</string> <key>BiosVendor</key> <string>Apple Inc.</string> <key>BiosVersion</key> <string>IM171.88Z.0105.B00.1509221819</string> <key>Board-ID</key> <string>Mac-DB15BD556843C820</string> <key>BoardManufacturer</key> <string>Apple Inc.</string> <key>BoardType</key> <integer>10</integer> <key>BoardVersion</key> <string>iMac17,1</string> <key>ChassisAssetTag</key> <string></string> <key>ChassisManufacturer</key> <string>Apple Inc.</string> <key>ChassisType</key> <string>13</string> <key>Family</key> <string>iMac</string> <key>LocationInChassis</key> <string>Part Component</string> <key>Manufacturer</key> <string>Apple Inc.</string> <key>ProductName</key> <string>iMac17,1</string> <key>SerialNumber</key> <string>XXXXXXXXXX</string> <key>Trust</key> <false/> <key>Version</key> <string>1.0</string> </dict> <key>SystemParameters</key> <dict> <key>InjectKexts</key> <string>Yes</string> <key>InjectSystemID</key> <true/> </dict> </dict> </plist> Thanks in Advance for help Link to comment Share on other sites More sharing options...
BaiGoogleDu Posted August 23, 2016 Share Posted August 23, 2016 Does your battery work nomally?My HP laptop's battery status cannot decrease. Link to comment Share on other sites More sharing options...
Rasstar Posted October 25, 2016 Share Posted October 25, 2016 Can someone write a guide? Link to comment Share on other sites More sharing options...
Recommended Posts