Biso007 Posted December 9, 2015 Share Posted December 9, 2015 Hello, I had a perfect installation for 10.11.1 on my HP Elitebook 8460p [sandy Bridge i7-2640M 2.8 GHz + HD3000 + 8 GB Ram] with Clover on MBR partition. After updating to 10.11.2 the system broke and gives the attached KP. No way to boot the system [-x or -s or booting from USB] Any idea what causes the KP or how to fix it ? TIA Link to comment Share on other sites More sharing options...
smolderas Posted December 9, 2015 Share Posted December 9, 2015 Hello, I had a perfect installation for 10.11.1 on my HP Elitebook 8460p [sandy Bridge i7-2640M 2.8 GHz + HD3000 + 8 GB Ram] with Clover on MBR partition. After updating to 10.11.2 the system broke and gives the attached KP. No way to boot the system [-x or -s or booting from USB] Any idea what causes the KP or how to fix it ? TIA It says, the launchd process (pid:1) couldn't get started. It may just be a corrupt software update. Try to reinstall it. Link to comment Share on other sites More sharing options...
Biso007 Posted December 9, 2015 Author Share Posted December 9, 2015 It says, the launchd process (pid:1) couldn't get started. It may just be a corrupt software update. Try to reinstall it How to boot the system 1st ? Link to comment Share on other sites More sharing options...
.venice. Posted December 9, 2015 Share Posted December 9, 2015 Did it go through second stage install part? Link to comment Share on other sites More sharing options...
Biso007 Posted December 9, 2015 Author Share Posted December 9, 2015 It rebooted one time and failed Link to comment Share on other sites More sharing options...
smolderas Posted December 9, 2015 Share Posted December 9, 2015 Don't you have backup(s)? Link to comment Share on other sites More sharing options...
.venice. Posted December 9, 2015 Share Posted December 9, 2015 It rebooted one time and failed So you applied the update in OSX and then it rebooted, you selected "Install (...)" instead of your usual boot partition and then what happened? Did the installation continue? It should continue and reboot one more time. Link to comment Share on other sites More sharing options...
Biso007 Posted December 9, 2015 Author Share Posted December 9, 2015 it went into the black screen with a gauge and rebooted at the end, but failed since then Link to comment Share on other sites More sharing options...
C.Frio Posted December 9, 2015 Share Posted December 9, 2015 hi.. did you try boot "-v -f" c.frio Link to comment Share on other sites More sharing options...
Biso007 Posted December 9, 2015 Author Share Posted December 9, 2015 yes but no luck as well Link to comment Share on other sites More sharing options...
artur_pt Posted December 9, 2015 Share Posted December 9, 2015 hello did u patch appleintelcpupowermanagement.kext ? good hack 1 Link to comment Share on other sites More sharing options...
Biso007 Posted December 10, 2015 Author Share Posted December 10, 2015 hello did u patch appleintelcpupowermanagement.kext ? good hack I use Clover fix for the AICPM .... Anyway, I had to do a dirty reinstallation from the 10.11 installer and tried to reinstall the 10.11.2 update but seems it doesn't work as attached. In App Store it says 10.11.2 is already installed. Maybe that's why. Well, hate to do things from scratch. Better to wait for 10.11.3 unless there is a solution without format the partition. Update.tiff Link to comment Share on other sites More sharing options...
artur_pt Posted December 10, 2015 Share Posted December 10, 2015 hello u can always do a install over the current installation .. and keep ur files .. only don't format the hd .. must use mbr patch for that .. good hack Link to comment Share on other sites More sharing options...
Biso007 Posted December 10, 2015 Author Share Posted December 10, 2015 I downloaded the 10.11.2 combo and it went into installation but gave the same failure eventually. 10.11.2 doesn't like my machine Link to comment Share on other sites More sharing options...
Recommended Posts