markmiranpt Posted November 25, 2015 Share Posted November 25, 2015 Hi all, Has anyone had similar issues with clover. Install OSX 10.10.5 with clover, and boots fine. Using clover config, I alter some of the boot flags which I have been putting in manually which are GraphicsEnabler=Yes, npci=0*2000, and turn off pci devices (I think). So when I set them permanetly using clover config, it just reboots. Any ideas? Link to comment Share on other sites More sharing options...
duduclx Posted November 27, 2015 Share Posted November 27, 2015 Corrupted file ? Link to comment Share on other sites More sharing options...
J Lamp Posted November 27, 2015 Share Posted November 27, 2015 That's npci=0x2000 not 0*2000 right? GraphicsEnabler=Yes was from Chameleon, there are different injection methods in the Clover config file. Try booting with the -v flag and see if you can spot the problem. Link to comment Share on other sites More sharing options...
Svetoslav D Posted January 8, 2016 Share Posted January 8, 2016 Hello there, I am struggling to finish wife's hackintosh so she can use it again finally. It was working well with Yosemite and Chameleon boot loader so far, until I decided to install El Capitan. The box is consisted with GA-Z77M-D3H mainboard and Nvidia GT 730 (kepler) graphics card. I am using Clover boot loader with Nvidia Web Drivers (nvda_drv=1). Sometimes it is able to boot correctly, but mostly ended by showing black screen, turn of the display and finally reboot. It seems that it doesn't recognize the graphic card correctly. I tried different random options, but the result is still the same. If they are any suggestions I am ready to give it a try, before to switch back to Chameleon eventually. Link to comment Share on other sites More sharing options...
carbo178 Posted January 10, 2016 Share Posted January 10, 2016 Hello there, I am struggling to finish wife's hackintosh so she can use it again finally. It was working well with Yosemite and Chameleon boot loader so far, until I decided to install El Capitan. The box is consisted with GA-Z77M-D3H mainboard and Nvidia GT 730 (kepler) graphics card. I am using Clover boot loader with Nvidia Web Drivers (nvda_drv=1). Sometimes it is able to boot correctly, but mostly ended by showing black screen, turn of the display and finally reboot. It seems that it doesn't recognize the graphic card correctly. I tried different random options, but the result is still the same. If they are any suggestions I am ready to give it a try, before to switch back to Chameleon eventually. Have you set CSRconfig=0x67 into config.plist? Link to comment Share on other sites More sharing options...
liujianwei Posted January 19, 2016 Share Posted January 19, 2016 Try disable all acpi fixes in clover config. Link to comment Share on other sites More sharing options...
Slice Posted January 20, 2016 Share Posted January 20, 2016 Try disable all acpi fixes in clover config. False Link to comment Share on other sites More sharing options...
Recommended Posts