Jump to content

OS X is only recognizing half of my RAM.

Wowfunhappy

By Wowfunhappy,
in OSx86 10.11 (El Capitan)

 Share
42 posts in this topic

Recommended Posts

Wowfunhappy
Wowfunhappy
Posted
Posted

Hello! I got OS X 10.11.1 El Capitan up and running on my Z170 system yesterday. Aside from some minor issues with Ethernet and sound (both of which I was able to work around) everything is pretty much great.

 

There is however one problem that I don't understand: I have a single stick of 8 GB DDR4 RAM installed on my computer. OS X, for whatever reason, thinks that I only have 4 GB of RAM installed.

 

Windows has no problems detecting and using the full 8 GB.

 

What on earth could be going on here, and how can I troubleshoot the problem? I'm not sure how to proceed. Let me know if you need any more information. Thank you so much!

  • Like 2
Link to comment
Share on other sites
Wowfunhappy
Wowfunhappy
Posted
  • Author
Posted

boot.log?

0:100  0:100  MemLog inited, TSC freq: 3504486360
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 6.11.2015,  17:55:27 (GMT+2047)
0:100  0:000  Starting Clover rev 3320 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(1,GPT,89E73C7A-97EB-4A5F-99B5-754419036715,0x28,0x64000) @8BA45998
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  Type 17 Index = 2
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3320  running on MS-7971
0:100  0:000  ... with board Z170A PC MATE (MS-7971)
0:100  0:000  CPU Vendor = 756E6547 Model=506E3
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz
0:100  0:000  MSR 0xE2 before patch 00000000
0:100  0:000  MSR 0xE4              00000000
0:100  0:000  MSR 0xCE              00080838_F1012300
0:100  0:000  non-usable FLEX_RATIO = F0000
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency=125MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 35.0/8
0:100  0:000  Turbo: 44/44/44/44
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 4400 MHz
0:100  0:000  TSC: 4400 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:100  0:000  PCI (00|00:08.00) : 8086 1911 class=088000
0:100  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:100  0:000  PCI (00|00:14.02) : 8086 A131 class=118000
0:100  0:000  PCI (00|00:15.00) : 8086 A160 class=118000
0:100  0:000  PCI (00|00:15.01) : 8086 A161 class=118000
0:100  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:100  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:100  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:100  0:000  PCI (00|00:1C.02) : 8086 A112 class=060400
0:100  0:000  PCI (00|02:00.00) : 1B21 1242 class=0C0330
0:100  0:000  PCI (00|00:1C.04) : 8086 A114 class=060400
0:100  0:000  PCI (00|03:00.00) : 10DE 13C2 class=030000
0:100  0:000  Found NVidia model=Zotac GeForce GTX 970
0:100  0:000  PCI (00|03:00.01) : 10DE 0FBB class=040300
0:100  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:100  0:000  PCI (00|00:1D.02) : 8086 A11A class=060400
0:100  0:000  PCI (00|05:00.00) : 1B21 1080 class=060400
0:100  0:000  PCI (00|00:1D.03) : 8086 A11B class=060400
0:100  0:000  PCI (00|07:00.00) : 10EC 8168 class=020000
0:100  0:000  LAN 0, Vendor=10EC, MMIO=D000
0:100  0:000  PCI (00|00:1E.00) : 8086 A127 class=118000
0:100  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:100  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:100  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:100  0:000  Clover load options size = 0 bytes
0:105  0:004  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:105  0:000  EFI\CLOVER\config.plist loaded: Success
0:106  0:001  Found theme directory: embedded
0:106  0:000  Found theme directory: random
0:107  0:000  Loading early settings
0:107  0:000  timeout set to 0
0:107  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:107  0:000  KextsToPatch: 3 requested
0:107  0:000  KextsToPatch 0: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
0:107  0:000  KextsToPatch 1: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC887) Kext bin patch, data len: 4
0:107  0:000  KextsToPatch 2: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:107  0:000  Default theme: embedded
0:107  0:000  LoadDrivers() start
0:107  0:000  Loading FSInject-64.efi  status=Success
0:109  0:001  Loading OsxAptioFixDrv-64.efi  status=Success
0:110  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:110  0:000  Loading HFSPlus.efi  status=Success
0:111  0:000   - driver needs connecting
0:111  0:000  1 drivers needs connecting ...
0:111  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:111  0:000  HFS+ driver loaded 
0:111  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:288  0:177  LoadDrivers() end
0:288  0:000  Dump SMC keys from NVRAM:
0:300  0:011  SetScreenResolution: 1920x1080 - not found!
0:300  0:000  SetMaxResolution: found best mode 2: 1280x1024
0:460  0:159  Video mode change to mode #2: Success
0:460  0:000   - set
0:460  0:000  Console modes reported: 4, available modes:
0:460  0:000    Mode 1: 80x25
0:460  0:000    Mode 2: 80x50
0:460  0:000    Mode 3: 100x31
0:460  0:000    Mode 4: 128x40 (current mode)
0:460  0:000  SetScreenResolution: 1280x1024 - already set
0:460  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(1,GPT,89E73C7A-97EB-4A5F-99B5-754419036715,0x28,0x64000)
0:460  0:000  MAC address of LAN #0= D8:CB:8A:99:33:43:
0:460  0:000  ScanSPD() start
0:460  0:000  SMBus CmdReg: 0x3
0:460  0:000  Scanning SMBus [8086:A123], mmio: 0xDF32A004, ioport: 0xF000, hostc: 0x11
0:460  0:000  Slots to scan [8]...
0:495  0:034  SPD[1]: Type 12 @0x51 
0:495  0:000  Sorry, DDR4 is not fully implemented! Use settings in config.plist
0:495  0:000  DDR speed 3200MHz 
0:495  0:000  Slot: 1 Type 26 4096MB 3200MHz Vendor=NoName PartNo= SerialNo=0200020B000C020B 
0:541  0:045  ScanSPD() end
0:541  0:000  Get Acpi Tables List from RSDT:
0:541  0:000   Found table: FACP  A M I  len=132
0:541  0:000   Found table: APIC  A M I  len=132
0:541  0:000   Found table: FPDT  A M I  len=68
0:541  0:000   Found table: FIDT  A M I  len=156
0:541  0:000   Found table: MCFG  A M I len=60
0:541  0:000   Found table: HPET  A M I len=56
0:541  0:000   Found table: SSDT  SataTabl len=877
0:541  0:000   Found table: LPIT  SKL len=148
0:541  0:000   Found table: SSDT  sensrhub len=584
0:541  0:000   Found table: SSDT  PtidDevc len=11182
0:541  0:000   Found table: SSDT  Ther_Rvp len=3141
0:541  0:000   Found table: DBGP   len=52
0:541  0:000   Found table: DBG2   len=84
0:541  0:000   Found table: SSDT  xh_rvp08 len=1557
0:541  0:000   Found table: SSDT  SaSsdt  len=21426
0:541  0:000   Found table: UEFI   len=66
0:541  0:000   Found table: SSDT  CpuSsdt len=3738
0:541  0:000  Calibrated TSC frequency =3504486360 =3504MHz
0:541  0:000  Loading main settings
0:541  0:000  Dropping 3 tables
0:541  0:000  Drop table 0 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
0:541  0:000  set table: 54445353,   74734930757043 to drop:
0:541  0:000  Drop table 1 signature="DMAR" (52414D44)
0:541  0:000  set table: 52414D44,                0 to drop:
0:541  0:000  Drop table 2 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
0:541  0:000  set table: 54445353,       6D50757043 to drop:
0:541  0:000  Config set Fixes will override FixMask mask!
0:541  0:000     final mask=9FC28011
0:541  0:000  Config set ChassisType=0xD
0:541  0:000  GetEfiBootDeviceFromNvram:
0:541  0:000   efi-boot-device-data: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(2,GPT,CAFE28D4-A8CA-45E8-9350-D5434ABD4DE4,0x64028,0x3B847340)
0:541  0:000   Volume: 'PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(2,GPT,CAFE28D4-A8CA-45E8-9350-D5434ABD4DE4,0x64028,0x3B847340)'
0:541  0:000   LoaderPath: '<null string>'
0:541  0:000   Guid = CAFE28D4-A8CA-45E8-9350-D5434ABD4DE4
0:541  0:000  found 13 volumes with blockIO
0:541  0:000   0. Volume:
0:541  0:000    PciRoot(0x0)\Pci(0x14,0x0)\USB(0x2,0x0)
0:550  0:009    USB volume
0:550  0:000   1. Volume:
0:550  0:000    PciRoot(0x0)\Pci(0x14,0x0)\USB(0x2,0x0)\HD(1,MBR,0xA29719C3,0x2,0x74706DAE)
0:551  0:000    Result of bootcode detection: bootable unknown (legacy)
0:551  0:000    USB volume
0:551  0:000   2. Volume:
0:551  0:000    PciRoot(0x0)\Pci(0x14,0x0)\USB(0x10,0x0)
0:552  0:000    USB volume
0:552  0:000   3. Volume:
0:552  0:000    PciRoot(0x0)\Pci(0x14,0x0)\USB(0x10,0x0)\HD(1,MBR,0x00000000,0x2,0x735BFFE)
0:553  0:000    Result of bootcode detection: bootable unknown (legacy)
0:553  0:000    USB volume
0:556  0:002   4. Volume:
0:556  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)
0:556  0:000   5. Volume:
0:556  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)
0:557  0:000   6. Volume:
0:557  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,905FD6A1-E9CC-476B-B2A0-D58AF5CD7E56,0x800,0x96000)
0:579  0:022    Result of bootcode detection: bootable Windows (vista,win)
0:579  0:000   7. Volume:
0:579  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,143F0590-B6AA-4489-8B03-8591254757CC,0x96800,0x32000)
0:580  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:580  0:000   8. Volume:
0:580  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)\HD(3,GPT,37A74A21-53D9-4913-94D5-93B31593141A,0xC8800,0x40000)
0:580  0:000   9. Volume:
0:580  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x4,0xFFFF,0x0)\HD(4,GPT,FF147277-F444-49EE-B83E-D1FDB593DE32,0x108800,0x3A27D000)
0:581  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:581  0:000  10. Volume:
0:581  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(1,GPT,89E73C7A-97EB-4A5F-99B5-754419036715,0x28,0x64000)
0:582  0:000    Result of bootcode detection: bootable unknown (legacy)
0:582  0:000    This is SelfVolume !!
0:582  0:000  11. Volume:
0:582  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(2,GPT,CAFE28D4-A8CA-45E8-9350-D5434ABD4DE4,0x64028,0x3B847340)
0:582  0:000  12. Volume:
0:582  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(3,GPT,20C1F51C-14AA-435A-9E10-EE43E41F6A90,0x3B8AB368,0x135F20)
0:583  0:000   using embedded theme
0:583  0:000  Choosing theme <null string>
0:583  0:000  found boot-args in NVRAM:kext-dev-mode=0 nvda_drv=1, size=27
0:583  0:000  ...found arg:kext-dev-mode=0
0:583  0:000  ...adding arg:kext-dev-mode=0
0:583  0:000  ...found arg:nvda_drv=1
0:583  0:000  Custom entries start
0:583  0:000  Custom entries finish
0:583  0:000  Scanning loaders...
0:583  0:000   0: 'Whole Disc Boot' no file system
0:583  0:000   1: 'Legacy HD1' no file system
0:583  0:000   2: 'Whole Disc Boot' no file system
0:583  0:000   3: 'STUFF'
0:583  0:000   4: 'Whole Disc Boot' no file system
0:583  0:000   5: 'Whole Disc Boot' no file system
0:583  0:000   6: 'Recovery'
0:584  0:000   7: 'EFI'
0:591  0:007      AddLoaderEntry for Volume Name=EFI
0:591  0:000   8: 'Legacy HD3' no file system
0:591  0:000   9: 'BOOTCAMP'
0:592  0:000  10: 'EFI'
0:592  0:000  11: 'El Capitan'
0:594  0:001      AddLoaderEntry for Volume Name=El Capitan
0:596  0:001      Check if volume Is Hibernated:
0:596  0:000      Check sleep image 'by signature':
0:601  0:004      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
0:601  0:000      SleepImage name from pref: ImageVolume = 'El Capitan', ImageName = '\private\var\vm\sleepimage'
0:603  0:002      Reading first 512 bytes of sleepimage ...
0:604  0:000   OurBlockIoRead: Lba=1D240A8, Offset=3A4815000 (BlockSize=512)
0:604  0:000   sig lion: 140014
0:604  0:000   sig snow: 12002B00
0:604  0:000   no valid sleep image offset was found
0:604  0:000      Reading completed -> Success
0:604  0:000       sleepimage offset could not be acquired
0:604  0:000       hibernated: no - sign
0:604  0:000  12: 'Recovery HD'
0:605  0:000      AddLoaderEntry for Volume Name=Recovery HD
0:607  0:001  Custom legacy start
0:607  0:000  Custom legacy end
0:607  0:000  Scanning legacy ...
0:607  0:000   0: 'Whole Disc Boot' (legacy) not legacy
0:607  0:000   1: 'Legacy HD1' (legacy) not legacy
0:607  0:000   2: 'Whole Disc Boot' (legacy) not legacy
0:607  0:000   3: 'STUFF' (legacy) not legacy
0:607  0:000   4: 'Whole Disc Boot' (legacy) not legacy
0:607  0:000   5: 'Whole Disc Boot' (legacy) not legacy
0:607  0:000   6: 'Recovery' (vista,win) add legacy
0:607  0:000   added 'Boot Windows from Recovery' OSType=2 Icon=vista,win
0:607  0:000   7: 'EFI' (vista,win) add legacy
0:607  0:000   added 'Boot Windows from EFI' OSType=2 Icon=vista,win
0:607  0:000   8: 'Legacy HD3' (legacy) not legacy
0:607  0:000   9: 'BOOTCAMP' (vista,win) add legacy
0:607  0:000   added 'Boot Windows from BOOTCAMP' OSType=2 Icon=vista,win
0:607  0:000  10: 'EFI' (legacy) not legacy
0:607  0:000  11: 'El Capitan' (legacy) not legacy
0:607  0:000  12: 'Recovery HD' (legacy) not legacy
0:607  0:000  Custom tool start
0:607  0:000  Custom tool end
0:608  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
0:608  0:000  Checking EFI partition Volume 7 for Clover
0:608  0:000  Checking EFI partition Volume 10 for Clover
0:608  0:000   Found Clover
0:608  0:000  GetEfiBootDeviceFromNvram:already parsed
0:608  0:000   volume: partition = PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x5,0xFFFF,0x0)\HD(2,GPT,CAFE28D4-A8CA-45E8-9350-D5434ABD4DE4,0x64028,0x3B847340)
0:608  0:000   searching for that partition
0:608  0:000    found entry 1. 'Boot Mac OS X from El Capitan', Volume 'El Capitan'
0:608  0:000  Boot redirected to Entry 1. 'Boot Mac OS X from El Capitan'
0:608  0:000  DefaultIndex=1 and MainMenu.EntryCount=12
0:608  0:000  StartLoader() start
0:608  0:000  Entry->Settings: <null string>
0:608  0:000  Finally: Bus=100128kHz CPU=3504MHz
0:608  0:000  Kernel and Kext Patches at 85E6B0F0:
0:608  0:000  	Allowed: y
0:608  0:000  	Debug: n
0:608  0:000  	KernelCpu: n
0:608  0:000  	Lapic: n
0:608  0:000  	Haswell-E: n
0:608  0:000  	AICPUPM: n
0:608  0:000  	AppleRTC: y
0:608  0:000  	KernelPm: y
0:608  0:000  	FakeCPUID: 0x0
0:608  0:000  	ATIController: null
0:608  0:000  	ATIDataLength: 0
0:608  0:000  	0 Kexts to load
0:608  0:000  	3 Kexts to patch
0:608  0:000  	  KextPatch[0]: 4 bytes, AppleHDA
0:608  0:000  	  KextPatch[1]: 4 bytes, AppleHDA
0:608  0:000  	  KextPatch[2]: 6 bytes, AppleHDA
0:608  0:000  Loading boot.efi  status=Success
1:748  1:139  GetOSVersion: : 10.11.1
1:748  0:000  insert table 9 for dev 0:0
1:748  0:000  insert table 9 for dev 0:1
1:748  0:000  insert table 9 for dev 0:0
1:748  0:000  Trusting SMBIOS...
1:748  0:000  Detected alternating SMBIOS channel banks
1:748  0:000  Channels: 1
1:748  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
1:748  0:000  SMBIOS Type 17 Index = 0 => 0 0:
1:748  0:000  BANK0 DIMM0 EMPTY
1:748  0:000   partNum=16ATF1G64AZ-2G1A1   
1:748  0:000  SMBIOS Type 17 Index = 1 => 1 1:
1:748  0:000  BANK0 DIMM1 3200MHz 4096MB
1:748  0:000  mTotalSystemMemory = 4096
1:748  0:000  SMBIOS Type 17 Index = 2 => 2 2:
1:748  0:000  BANK0 DIMM2 EMPTY
1:748  0:000  SMBIOS Type 17 Index = 3 => 3 3:
1:748  0:000  BANK0 DIMM3 EMPTY
1:748  0:000  NumberOfMemoryDevices = 4
1:748  0:000  Table 131 is present, CPUType=31
1:748  0:000  Change to: 606
1:748  0:000  RSDT 0x8F2B0028
1:748  0:000  FADT from RSDT: 0x8F2B0150
1:748  0:000  XSDT 0x8F2B0098
1:748  0:000  FADT from XSDT: 0x8F2D1270
1:748  0:000  Xsdt reallocation done
1:748  0:000  old FADT length=10C
1:748  0:000  Found OperationRegion(GNVS, SystemMemory, 8F2F1000, ...)
1:748  0:000  Found OperationRegion(CPSB, SystemMemory, 8E8A5F18, ...)
1:748  0:000  Found OperationRegion(PNVA, SystemMemory, 8F2F2C98, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW1, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW1, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PREG, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PREG, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PREG, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:748  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(GPPX, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(GPPX, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(GPPX, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(PDW0, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(THBA, SystemMemory, FE200000, ...)
1:749  0:000  Found OperationRegion(THBA, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(PCR0, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(PCR0, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(PCR1, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(PWMR, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(PMST, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(XHCP, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(MC11, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(MC11, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(XDBW, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(XDBD, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(XDW2, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(RPAL, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(EPAC, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(NCRG, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(ICB1, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(ICB1, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(ICB1, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(ICB1, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(BAR0, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(BAR0, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(BAR1, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(BAR1, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(ITSS, SystemMemory, FDC43100, ...)
1:749  0:000  Found OperationRegion(MBAR, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(ACTC, SystemMemory, 0, ...)
1:749  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
1:749  0:000  Found OperationRegion(CRBD, SystemMemory, FED40000, ...)
1:749  0:000  Found OperationRegion(TPMR, SystemMemory, FFFFFFFF, ...)
1:750  0:000  Apply DsdtFixMask=0x9FC28011 new way
1:750  0:000     drop _DSM mask=0x0088
1:750  0:000  ========= Auto patch DSDT Starting ========
1:750  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
1:750  0:000  USBADR[1] = 0x1C0002 and PCIe = 0x0
1:750  0:000  VideoCard devID=0x13C210DE
1:750  0:000  DisplayADR1[0] = 0x1C0004, DisplayADR2[0] = 0x0
1:763  0:013  Audio HDA (addr:0x1F0003) setting specified layout-id=2 (0x2)
1:763  0:000  first CPU found at 888D offset 8890
1:763  0:000  score candidate at 8889
1:763  0:000  score inserted in acpi_cpu_score _PR_
1:763  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
1:764  0:000  Found PCIROOTUID = 0
1:764  0:000  Start RTC Fix
1:764  0:000  found RTC Length not match, Maybe will case CMOS reset will patch it.
1:764  0:000  found RTC had IRQNoFlag will move -3 bytes
1:764  0:000  ...len=210D1
1:764  0:000  new size written to 20260 shift=0 len=210D1
1:764  0:000  len after correct outers 210D1
1:764  0:000  Start HPET Fix
1:764  0:000  patch HDEF in DSDT 
1:765  0:000  Start HDA Fix
1:765  0:000  found HDA device NAME(_ADR,0x001F0003) And Name is HDAS
1:765  0:000  Name HDAS present at 0x9ED3, renaming to HDEF
1:765  0:000  Name HDAS present at 0xB8A8, renaming to HDEF
1:765  0:000  Name HDAS present at 0xB932, renaming to HDEF
1:765  0:000  Name HDAS present at 0xB943, renaming to HDEF
1:765  0:000  Name HDAS present at 0xB9E8, renaming to HDEF
1:765  0:000  Name HDAS present at 0xBA56, renaming to HDEF
1:765  0:000  _DSM in HDA already exists, dropped
1:765  0:000  Start HDMI131 Fix
1:765  0:000  have no HDMI device while HDMIADR2=1
1:765  0:000  HDMIADR1=1C0004 HDMIADR2=1
1:765  0:000    with default properties
1:765  0:000   deleting device CRT_
1:766  0:000   deleting device DVI_
1:766  0:000   deleting device SPKR
1:767  0:000   deleting device ECP_
1:767  0:000   deleting device LPT_
1:767  0:000   deleting device FDC0
1:768  0:000   deleting device ECP1
1:768  0:000   deleting device LPT1
1:769  0:001  Start PNLF Fix
1:770  0:000  found PWRB at 2031C
1:770  0:000  Start _S3D Fix
1:770  0:000  OperationRegion (GNVS...) corrected to addr=0x8F2F1000
1:770  0:000  OperationRegion (CPSB...) corrected to addr=0x8E8A5F18
1:770  0:000    indirect name=PNVB
1:770  0:000  OperationRegion (PNVA...) corrected to addr=0x8F2F2C98
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW1...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW1...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PREG...) corrected to addr=0x0
1:770  0:000  OperationRegion (PREG...) corrected to addr=0x0
1:770  0:000  OperationRegion (PREG...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (GPPX...) corrected to addr=0x0
1:770  0:000  OperationRegion (GPPX...) corrected to addr=0x0
1:770  0:000  OperationRegion (GPPX...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PDW0...) corrected to addr=0x0
1:770  0:000  OperationRegion (THBA...) corrected to addr=0x0
1:770  0:000  OperationRegion (THBA...) corrected to addr=0x0
1:770  0:000  OperationRegion (PCR0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PCR0...) corrected to addr=0x0
1:770  0:000  OperationRegion (PCR1...) corrected to addr=0x0
1:770  0:000  OperationRegion (PWMR...) corrected to addr=0x0
1:770  0:000    indirect name=PWRV
1:770  0:000  ... value not defined
1:770  0:000  OperationRegion (PMST...) corrected to addr=0x0
1:770  0:000  OperationRegion (XHCP...) corrected to addr=0x0
1:770  0:000    indirect name=XWMB
1:770  0:000  ... value not defined
1:770  0:000  OperationRegion (MC11...) corrected to addr=0x0
1:770  0:000    indirect name=XWMB
1:770  0:000  ... value not defined
1:770  0:000  OperationRegion (MC11...) corrected to addr=0x0
1:770  0:000  OperationRegion (XDBW...) corrected to addr=0x0
1:770  0:000  OperationRegion (XDBD...) corrected to addr=0x0
1:771  0:000  OperationRegion (XDW2...) corrected to addr=0x0
1:771  0:000  OperationRegion (RPAL...) corrected to addr=0x0
1:771  0:000  OperationRegion (EPAC...) corrected to addr=0x0
1:771  0:000  OperationRegion (NCRG...) corrected to addr=0x0
1:771  0:000  OperationRegion (ICB1...) corrected to addr=0x0
1:771  0:000  OperationRegion (ICB1...) corrected to addr=0x0
1:771  0:000  OperationRegion (ICB1...) corrected to addr=0x0
1:771  0:000  OperationRegion (ICB1...) corrected to addr=0x0
1:771  0:000  OperationRegion (BAR0...) corrected to addr=0x0
1:771  0:000  OperationRegion (BAR0...) corrected to addr=0x0
1:771  0:000  OperationRegion (BAR1...) corrected to addr=0x0
1:771  0:000  OperationRegion (BAR1...) corrected to addr=0x0
1:771  0:000  OperationRegion (ITSS...) corrected to addr=0xFDC43100
1:771  0:000  OperationRegion (MBAR...) corrected to addr=0x0
1:771  0:000  OperationRegion (ACTC...) corrected to addr=0x0
1:771  0:000  OperationRegion (TMMB...) corrected to addr=0xFED40000
1:771  0:000    indirect name=TPMM
1:771  0:000  OperationRegion (CRBD...) corrected to addr=0xFED40000
1:771  0:000    indirect name=FTPM
1:771  0:000  OperationRegion (TPMR...) corrected to addr=0xFFFFFFFF
1:771  0:000  Start ADP1 fix
1:771  0:000  no device(AC) exists
1:771  0:000  ========= Auto patch DSDT Finished ========
1:771  0:000  Patch table: SSDT  SataTabl
1:771  0:000   SSDT len = 0x36D
1:771  0:000  Patch table: SSDT  sensrhub
1:771  0:000   SSDT len = 0x248
1:771  0:000  Patch table: SSDT  PtidDevc
1:771  0:000   SSDT len = 0x2BAE
1:771  0:000  Patch table: SSDT  Ther_Rvp
1:771  0:000   SSDT len = 0xC45
1:771  0:000  Patch table: SSDT  xh_rvp08
1:771  0:000   SSDT len = 0x615
1:771  0:000  Patch table: SSDT  SaSsdt 
1:771  0:000   SSDT len = 0x53B2
1:771  0:000  Patch table: SSDT  CpuSsdt
1:771  0:000   SSDT len = 0xE9A
1:771  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
1:771  0:000   Xsdt has tables count=17 
1:771  0:000  corrected XSDT length=172
1:771  0:000  Inserting ssdt-1.aml from EFI\CLOVER\ACPI\patched ... Success
1:771  0:000   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
1:771  0:000  Maximum control=0x23
1:771  0:000  Turbo control=0x2C
1:771  0:000  P-States: min 0x8, max 0x2C
1:771  0:000  SSDT with CPU P-States generated successfully
1:771  0:000  SSDT with CPU C-States generated successfully
1:771  0:000  EdidDiscovered size=0
1:771  0:000  USB Controller [8086:A12F] :: PciRoot(0x0)\Pci(0x14,0x0)
1:771  0:000  USB Controller [1B21:1242] :: PciRoot(0x0)\Pci(0x1C,0x2)\Pci(0x0,0x0)
1:771  0:000  NVidia GFX injection not set
1:771  0:000  LAN Controller [10EC:8168] :: PciRoot(0x0)\Pci(0x1D,0x3)\Pci(0x0,0x0)
1:771  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => setting specified layout-id=2 (0x2)
1:771  0:000  stringlength = 1716
1:771  0:000  CurrentMode: Width=1280 Height=1024
1:771  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8BA45718
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8BA45718
1:775  0:003  MSR 0x1B0   set to        00000000
1:775  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
1:775  0:000    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
1:777  0:002    Extra kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext
1:778  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
1:780  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
1:781  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
1:783  0:001  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
1:784  0:000    Extra kext: EFI\CLOVER\kexts\10.11\realtekALC.kext
1:784  0:000  SetStartupDiskVolume:
1:784  0:000    * Volume: 'El Capitan'
1:784  0:000    * LoaderPath: '<null string>'
1:784  0:000    * DevPath: El Capitan
1:784  0:000    * GUID = CAFE28D4-A8CA-45E8-9350-D5434ABD4DE4
1:784  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>CAFE28D4-A8CA-45E8-9350-D5434ABD4DE4</string></dict></dict></dict></array>
1:785  0:000  Custom boot screen not used because entry has unset use graphics
1:785  0:000  Closing log
Link to comment
Share on other sites
bomerr
bomerr
Posted
Posted

I don't think so, 2 or 3 users had the same problem, they resolved it by pressin f8 in the bios and selecting the clover bootloader manually, that doesn't work for me

unfortunately.

doesn't work for me either.

 

i think they just have an intermittent problem while ours is continuous?

 

btw does your sleep work? 

Link to comment
Share on other sites
Wowfunhappy
Wowfunhappy
Posted
  • Author
Posted

OMG, I fixed it. It was such an easy fix, I can't believe I couldn't figure it out until now.

 

In Clover Configurator, I added the following (click the plus sign):

 

615d818295.png

 

Obviously, change these values based on your RAM.

 

YOU MUST FILL IN ALL VALUES. It's okay to put in "Unknown" for some fields (I did, as you can see), but everything must be filled in. This is what stopped it from working when I first tried several days ago.

 

(I'm sure you could accomplish the same thing with textEdit instead of Clover Configurator.)

  • Like 1
Link to comment
Share on other sites
jancarlos1597
jancarlos1597
Posted
Posted

OMG, I fixed it. It was such an easy fix, I can't believe I couldn't figure it out until now.

 

In Clover Configurator, I added the following (click the plus sign):

 

615d818295.png

 

Obviously, change these values based on your RAM.

 

YOU MUST FILL IN ALL VALUES. It's okay to put in "Unknown" for some fields (I did, as you can see), but everything must be filled in. This is what stopped it from working when I first tried it several days ago.

 

(I'm sure you could accomplish the same thing with textEdit instead of Clover Configurator.)

I swear i was about to do that last night but i said meh, that's not the problem haha, congrats and thanks a lot man!

  • Like 1
Link to comment
Share on other sites
Tightlovin
Tightlovin
Posted
Posted

Guys, SMBios in Clover is only cosmetic procedure! Run memtest on your computers and see how much memory is really working!

After correcting SMbios in Clover i've got this:

 

 

gR9qz9B.jpg

 


OMG, I fixed it. It was such an easy fix, I can't believe I couldn't figure it out until now.

 

In Clover Configurator, I added the following (click the plus sign):

 

Obviously, change these values based on your RAM.

 

YOU MUST FILL IN ALL VALUES. It's okay to put in "Unknown" for some fields (I did, as you can see), but everything must be filled in. This is what stopped it from working when I first tried it several days ago.

 

(I'm sure you could accomplish the same thing with textEdit instead of Clover Configurator.)

did you tested your memory?

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Guys, SMBios in Clover is only cosmetic procedure! Run memtest on your computers and see how much memory is really working!

After correcting SMbios in Clover i've got this:

 

did you tested your memory?

Clover reported Memory to system only in SMBIOS. It is not cosmetic, it is all.

Link to comment
Share on other sites
bronxteck
bronxteck
Posted
Posted

some bios limit the amount of ram to 4 GB when the option in bios is set to "OS install" mode or "compatible" it helps with older OS environments that can only read 4 GB of ram like older 32 bit operating systems. IE windows 95 or 98. maybe recheck your bios settings.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...