thy1225 Posted September 1, 2015 Share Posted September 1, 2015 I'm running 10.10.4 with Clover Bootloader Everything works find except I couldn't shutdown my computer completely (The Power LED is still on and the Fan is still spinning) Tried a lot of solutions on the forum but none of it works. Can someone help me out? Here's my setup and configuration files Motherboard: GA-P67A-UD3R-B3 CPU: 3.39 GHz Intel Core i7 Graphic: AMD Radeon HD 6xxx 1024 MB SSD: Intel 256GB I attach the bootLog, Clover config file, DSDT and SSDT file and here's the kexts I currently use: FakeSMC.kext GenericUSBXHCI.kext realtekALC.kext RealtekRTL8111.kext Restart function kind of works.... (after the shutdown process, the LED and the fan will still on for like 30 secs before it start to boot ) Please help me solve this problem... I'll try any solution if possible! and if you need any other information, I'll post it up asap thank! BootLog_20150901.txt clover_config_DSDT_SSDT_20150901.zip Link to comment Share on other sites More sharing options...
calibre™ Posted September 1, 2015 Share Posted September 1, 2015 (edited) try removing GenericUSBXHCI and check again. If problem solved, upgrade to 10.10.5 and use this or clover's KextsToPatch for USB3.0 Edited September 1, 2015 by calibre™ Link to comment Share on other sites More sharing options...
thy1225 Posted September 1, 2015 Author Share Posted September 1, 2015 Thanks, I removed the "GenericUSBXHCI.kext" but the problem is still there. is there any other suggestions? Link to comment Share on other sites More sharing options...
calibre™ Posted September 1, 2015 Share Posted September 1, 2015 send /var/log/system.log Link to comment Share on other sites More sharing options...
thy1225 Posted September 1, 2015 Author Share Posted September 1, 2015 send /var/log/system.log Here's the /var/log/system.log file Hope it helps Thanks! btw, I updated to 10.10.5, and now I only used these two kext: FakeSMC.kext, RealtekRTL8111.kext and the problem is still there...... system_20150901.log.zip Link to comment Share on other sites More sharing options...
owbp Posted September 2, 2015 Share Posted September 2, 2015 Why don't you try fixing it with EvOreboot.kext and patched AppleRTC.kext. It always solves all my reboot, shutdown, usb and cmos reset problems. Link to comment Share on other sites More sharing options...
duduclx Posted September 2, 2015 Share Posted September 2, 2015 have you applied patch on dsdt and ssdt ? wich one ? in clover config.plist: in ACPI: check FixHPET check drop_oem_dsm SSDT, check dropoem your config fie is really not complete, don't you configure smbios in it ? Link to comment Share on other sites More sharing options...
thy1225 Posted September 3, 2015 Author Share Posted September 3, 2015 have you applied patch on dsdt and ssdt ? wich one ? in clover config.plist: in ACPI: check FixHPET check drop_oem_dsm SSDT, check dropoem your config fie is really not complete, don't you configure smbios in it ? My apology, I just notice the config.plist file I attached is not correct. Don't know how I ended up uploading that wrong one. Here's the right config.plist I'm using right now and Yes, I configure the smbios in it, and you can see that in the config file this time. I didn't patch the dsdt nor the ssdt file myself. (don't know how actually..) I just download them from the web which said it's for this motherboard and use it till now @@ I configure the config.plist according your instruction but the problem remain, any idea what else I can try ? Thanks a lot for helping Link to comment Share on other sites More sharing options...
thy1225 Posted September 3, 2015 Author Share Posted September 3, 2015 Why don't you try fixing it with EvOreboot.kext and patched AppleRTC.kext. It always solves all my reboot, shutdown, usb and cmos reset problems. Thanks but I tried EvOreboot.kext and still no luck with it.... nothing happened~ so weird~ Link to comment Share on other sites More sharing options...
thy1225 Posted September 4, 2015 Author Share Posted September 4, 2015 Any one can give me any suggestions ? Very appreciate~ Link to comment Share on other sites More sharing options...
Mac Hosehead Posted September 4, 2015 Share Posted September 4, 2015 I have seen interactions between DSDTs and the FixShutdown setting in the Acpi section of Clover. Secifically, if the setting was true the system would hang at shutdown. I assume you have tried this with FixShutdown false? -MH Link to comment Share on other sites More sharing options...
shiecldk Posted September 4, 2015 Share Posted September 4, 2015 I use UEFI Bios on this MB without a problem. http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-beta-bios.html http://www.mediafire.com/download/ko9941j52rdce0w/P7AUD3R3.U1b.zip Use it at your own risk. 1 Link to comment Share on other sites More sharing options...
thy1225 Posted September 6, 2015 Author Share Posted September 6, 2015 I have seen interactions between DSDTs and the FixShutdown setting in the Acpi section of Clover. Secifically, if the setting was true the system would hang at shutdown. I assume you have tried this with FixShutdown false? -MH Yes, I tried setting the "FixShutdown" false but the shutdown still doesn't work as it should~ I use UEFI Bios on this MB without a problem. http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-beta-bios.html http://www.mediafire.com/download/ko9941j52rdce0w/P7AUD3R3.U1b.zip Use it at your own risk. Thanks! I don't know I can flash the MB from bios to UEFI and am willing to try this out! btw, Is it possible to have your UEFI bios settings and clover config, DSDT, SSDT..etc very appreciate Link to comment Share on other sites More sharing options...
shiecldk Posted September 7, 2015 Share Posted September 7, 2015 Yes, I tried setting the "FixShutdown" false but the shutdown still doesn't work as it should~ Thanks! I don't know I can flash the MB from bios to UEFI and am willing to try this out! btw, Is it possible to have your UEFI bios settings and clover config, DSDT, SSDT..etc very appreciate Fill the blank values (serial numbers,MLB... etc) in the config.plist on your own. And Good Luck. P67A-UD3R-B3 config.zip kexts: FakeSMC&HWSensors,AppleHDA,AppleUSBXHCI(patch is already in config.plist) 1 Link to comment Share on other sites More sharing options...
thy1225 Posted September 7, 2015 Author Share Posted September 7, 2015 Fill the blank values (serial numbers,MLB... etc) in the config.plist on your own. And Good Luck. P67A-UD3R-B3 config.zip drivers64UEFI.jpg kexts: FakeSMC&HWSensors,AppleHDA,AppleUSBXHCI(patch is already in config.plist) THANK YOU SO MUCH!!!!!! I'll definitely try this out these days! Thank you thank you thank you~~~~~~ Link to comment Share on other sites More sharing options...
Recommended Posts