Jump to content

Help dual boot in different hard drive with clover


kali2000
 Share

3 posts in this topic

Recommended Posts

Hi friends! I need help with my dual boot Yosemite & Win10.

 

This is my hard drive tree...
 
24lsy7k.png
 
And they are my files tree...
 
2qbgpbo.png
 
cm9sj.png
 
I can see disk0 in clover boot with their three partitions, but I can't boot in Disk0s1 or Disk0s2.
Disk0s3 is only Data... it don't have any boot file.
Can anyone help me?
What is the problem?
I think that all the files are in place...
Thanks in advance.
Link to comment
Share on other sites

@kali2000,

 

It looks like you have Windows 10 installed in legacy mode (sometimes Clover will have difficulty booting legacy Windows installations depending on the system).

 

For best compatibility with Clover, Windows should be installed in UEFI mode.  This can be done even for machines with legacy (non UEFI) BIOS - see

 

 

If you don't want to format and re-install Windows, one workaround is to leave the legacy Windows bootloader in charge of booting Windows 10 and to chainload to Clover when you want to boot into OSX - see Using EasyBCD to Chainload Chameleon or Clover from the legacy Windows Bootloader

 

Good Luck!

 

PS Please put your hardware and software config in your signature.  It makes it easier for others to help you ;).

Link to comment
Share on other sites

 Share

×
×
  • Create New...