Jump to content

Installing yosemite to hp sleekbook 15


Falk88
 Share

15 posts in this topic

Recommended Posts

I, i'm tring to install Yosemite to my sleekbook 15 but i have some issue during the installation. i selec my pen drive to boot and then i have kernel panic and it sey erron on acpi and pci. i have try to boot with -s -f -v but i can't pass kernel panics. ho can i resolve it ?

This is my specification:

 

Mainboard:
 Produttore Hewlett-Packard
 Modello 18FD (U3E1)
 Versione 087E1000003B5900000320100
 Vendor Chipset Intel
 Modello Chipset Ivy Bridge
 Revisione Chipset 09
 Vendor Southbridge Intel
 Modello Southbridge HM77
 Revisione Southbridge 04
  BIOS
   Marca Insyde
   Versione F.1C
   Data 06/06/2014
  Dati PCI
    Slot PCI
     Tipo slot PCI
     Uso slot Disponibile
     Piste dati x16
     Designazione slot PCI Express Slot 1
     Caratteristiche PME, Hot Plug
     Numero slot 0
    Slot PCI
     Tipo slot PCI
     Uso slot Disponibile
     Piste dati x1
     Designazione slot PCI Express Slot 2
     Caratteristiche 5V, 3.3V, PME
     Numero slot 1
    Slot PCI
     Tipo slot PCI
     Uso slot Disponibile
     Piste dati x1
     Designazione slot PCI Express Slot 3
     Caratteristiche 5V, 3.3V
     Numero slot 2​

 

CPU
  Intel Core i5 3317U
   Core 2
   Thread 4
   Nome Intel Core i5 3317U
   Nome in Codice Ivy Bridge
   Package Socket 1023 FCBGA
   Tecnologia 22nm
   Specifiche Intel Core i5-3317U CPU @ 1.70GHz
   Famiglia 6
   Famiglia Estesa 6
   Modello A
   Modello Esteso 3A
   Stepping 9
   Revisione E1/L1
   Istruzioni MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX, AES, AVX
   Virtualizzazione Supportato, Attivato
   Hypertreading Supportato, Attivato
   Velocità Bus 99,8 MHz
   Velocità Stock Core 1700 MHz
   Velocità Stock Bus 100 MHz
   Temperatura Media 48 °C
    Cache
     Dimensione Cache Dati L1 2 x 32 KByte
     Dimensione Istruzioni Cache L1 2 x 32 KByte
     Dimensione Unificata Cache L2 2 x 256 KByte
     Dimensione Unificata Cache L3 3072 KByte​

 

RAM
  Slot memoria
   Totale slot memoria 2
   Slot memoria usati 1
   Slot memoria liberi 1
  Memoria
   Tipo DDR3
   Dimensioni 4096 MByte
   Canali # Singolo
   Frequenza DRAM 798,1 MHz
   Latenza CAS# (CL) clock 11
   Ritardo RAS# a CAS# (tRCD) clock 11
   Precaricamento RAS# (tRP) clock 11
   Cycle Time (tRAS) clock 28
   Command Rate (CR) 1T
  Memoria Fisica
   Memoria Usata 47 %
   Fisica Totale 3,89 GB
   Fisica Disponibile 2,04 GB
   Virtuale Totale 4,58 GB
   Virtuale Disponibile 2,75 GB
  SPD
   Numero Moduli SPD 1​

 

Grafica
  Schermo
   Nome Generic PnP Monitor on Intel HD Graphics 4000
   Risoluzione Corrente 1366x768 pixel
   Risoluzione Operativa 1366x728 pixel
   Stato Attivato, Primario
   Larghezza Schermo 1366
   Altezza Schermo 768
   Bpp Schermo 32 bit per pixel
   Frequenza Schermo 60 Hz
   Periferica \\.\DISPLAY1\Monitor0
  Intel HD Graphics 4000
   Produttore Intel
   Modello HD Graphics 4000
   ID Periferica 8086-0166
   Revisione A
   Subvendor HP (103C)
   Livello Prestazioni corrente Level 0
   Voltaggio 0,925 V
   Versione driver 10.18.10.4252
    Contatore livelli prestazioni: 1
      Level 1 - "Perf Level 0"
       Clock GPU 349 MHz
  NVIDIA GeForce GT 630M
   Produttore NVIDIA
   Modello GeForce GT 630M
   ID Periferica 10DE-1140
   Revisione A2
   Subvendor HP (103C)
   Livello Prestazioni corrente Level 2
   Voltaggio 0,925 V
   Interfaccia Bus PCI Express x8
   Temperatura 39 °C
   Versione driver 10.18.13.5560
   Versione BIOS 75.17.42.00.04
   Memoria Fisica 2047 MB
   Memoria Virtuale 2048 MB
    Contatore livelli prestazioni: 1
      Level 1 - "2D Desktop"
       Clock GPU 270 MHz
       Clock Memoria 405 MHz
       Clock Shader 540 MHz​

 

Audio
  Schede Audio
   NVIDIA Virtual Audio Device (Wave Extensible) (WDM)
   Dispositivo High Definition Audio
   Dispositivo High Definition Audio
  Periferica di Esecuzione
   Altoparlanti (2- Dispositivo High Definition Audio)
  Periferica di Registrazione
   Microfono (2- Dispositivo High Definition Audio)​

 

Networking:
 Connesso tramite Qualcomm Atheros AR9485 802.11b|g|n WiFi Adapter
 Indirizzo IP 192.168.1.103
 Maschera sottorete 255.255.255.0
 Server gateway 192.168.1.1
 Server DNS preferito 192.168.1.1
 DHCP Attivato
 Server DHCP 192.168.1.1
 Indirizzo IP Esterno 79.24.75.185
 Tipo Adattatore IEEE 802.11 wireless
 NetBIOS over TCP/IP  Attivato via DHCP
 Tipo Nodo NETBIOS Nodo ibrido
 Velocità Collegamento 45,9 KBps
  Nome Computer
   Nome NetBIOS DESKTOP-QHJHA1N
   Nome DNS DESKTOP-QHJHA1N
   Iscrizione Parte del workgroup
   Workgroup WORKGROUP
  Desktop Remoto
   Disattivato
    Console
     Stato Attivo
     Dominio DESKTOP-QHJHA1N
  Info WinInet
   Connessione LAN
   Il sistema locale usa una rete locale per connettersi ad Internet
   Il sistema locale si connette ad Internet tramite RAS
  Info Wi-Fi
   Usa versione nativa API Wi-Fi 2
   Conteggio access point disponibili 1
    Wi-Fi (TP-LINK_WPSafb22b7b0c)
     SSID TP-LINK_WPSafb22b7b0c
     Frequenza 2462000 kHz
     Numero Canale 11
     Nome TP-LINK_WPSafb22b7b0c
     Potenza/Qualità Segnale 100
     Sicurezza Attivato
     Stato Interfaccia connessa ad una rete
     Tipo Dot11 Infrastruttura rete BSS
     Rete Può connettersi
     Flag di Rete Attualmente Connesso a questa rete
     Algoritmo cifrato da usare nel collegamento a questa rete Algoritmo AES-CCMP
     Auth predefinito da usare nel primo collegamento a questa rete 802.11i Algoritmo RSNA che usa PSK
  WinHTTPInfo
   WinHTTPSessionProxyType Nessun Proxy
   Proxy Sessione
   Bypass Proxy Sessione
   Tentativi di connessione 5
   Timeout Connessione 60.000
   Versione HTTP HTTP 1.1
   Max Connessioni per Server 1.0 INFINITE
   Max Connessioni per Server INFINITE
   Max Reindirizzamenti Automatici HTTP 10
   Max Stato Continuo HTTP 10
   Timeout Send 30.000
   Auto Rilevamento Proxy IE Si
   Auto Configurazione Proxy IE
   Proxy IE
   Bypass Proxy IE
   Tipo Accesso Configurazione Proxy Predefinito Nessun Proxy
   Configurazione Proxy Predefinito
   Bypass Configurazione Proxy Predefinito
  Condivisione e Rilevamento
   Rilevamento Rete Disattivato
   Condivisione File e Stampanti Disattivato
   Servizio condivisione file e stampante Attivato
   Condivisione file semplice Attivato
   Condivisioni amministrative Attivato
   Accesso di rete: modello di condivisione e sicurezza per gli account locali Classico: gli utenti locali effettuano l'autenticazione come se stessi
  Elenco adattatori
    Attivato
      Qualcomm Atheros AR9485 802.11b|g|n WiFi Adapter
       Nome connessione Wi-Fi
       NetBIOS over TCPIP  Si
       DHCP attivato Si
       Indirizzo MAC 20-68-9D-E4-D9-FA
       Indirizzo IP 192.168.1.103
       Maschera sottorete 255.255.255.0
       Server gateway 192.168.1.1
       DHCP 192.168.1.1
       Server DNS 192.168.1.1
       0.0.0.0
      Realtek PCIe FE Family Controller
       Nome connessione Ethernet
       DHCP attivato Si
       Indirizzo MAC 84-34-97-80-C3-F3
  Condivisioni di Rete
   No network shares
  Connessioni TCP correnti
    C:\Users\Demonello\AppData\Local\Microsoft\OneDrive\OneDrive.exe (6828)
    C:\Users\DEMONE~1\AppData\Roaming\uTorrent\uTorrent.exe (6872)
    C:\Windows\explorer.exe (3828)
    C:\Windows\SystemApps\Microsoft.MicrosoftEdge_8wekyb3d8bbwe\MicrosoftEdgeCP.exe (5656)
    lsass.exe (780)
    NvNetworkService.exe (2144)
    NvStreamService.exe (2104)
    services.exe (772)
    spoolsv.exe (1768)
    svchost.exe (1076)
    svchost.exe (320)
    svchost.exe (932)
    System Process
    System Process
    wininit.exe (628)​


for installing it i download  Yosemite zone. It use darwin bootloader

Link to comment
Share on other sites

Recommend a retail install with Clover instead of a distro. Anyways, for HP laptops you will need to patch to kernel for LAPIC (Clover can do this on-the-fly, and I think recent revisions of Chameleon with KernelPatcher can do this too), and maybe power management (either AICPUPM or XNUPM) as well to prevent panics.

Link to comment
Share on other sites

Hfinally i installed Yosemite zone on the first partition of hard disk. I installed with the distro the clover bootloader but it wont boot with this partition. I try to boot with Yosemite pen drive with your help but it doesn t work again. By the way can u link me the correct tutorial to make a USB drive with Yosemite retail? How can i put clover bootloader to USB key with Yosemite without using a mac?

Link to comment
Share on other sites

 Share

×
×
  • Create New...