Jump to content

Need Help! HP Envy ivy Bridge [10.10 Yosemite] [i5 3317u || intel HD 4000]

Yosemite 10.10 hp envy ivy bridge intel hd 4000 hp post

  • Please log in to reply
18 replies to this topic

#1
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

Hi guys,

 

I have HP envy 4 1104tu (i5 3317u)

 

My specs are: http://postimg.org/image/6e2nysllh/

 

Config.png

 

I am able to boot using Chimera but I am getting an error using Clover

 

The error is: http://postimg.org/image/w3rcvbnur/

 

IMG_0894.png

 

video : http://unloadfile.com/fcc91cf8d4be08fa

 

 

 

I also need help in getting this things to work:

  • Audio ( controller: Intel Panther: IDT HD audio)
  • USB ( controller: Intel Panther: IDT 3.0)
  • Brightness Control
  • Battery %.

Please and Thank You.



#2
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

Video: Intel HD4000 and Haswell Inject AAPL,ig-platform-id

USB: GenericUSBXHCI USB 3.0 driver for OS X with source

Battery: You can use VoodooBattery.

 

For audio, we need know what is your codec. Use a Linux LiveCD for that, and run this commands:

cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt

or

cat /proc/asound/card0/codec#0 > ~/Desktop/codec_dump.txt


#3
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

 

Video: Intel HD4000 and Haswell Inject AAPL,ig-platform-id

USB: GenericUSBXHCI USB 3.0 driver for OS X with source

Battery: You can use VoodooBattery.

 

For audio, we need know what is your codec. Use a Linux LiveCD for that, and run this commands:

cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt

or

cat /proc/asound/card0/codec#0 > ~/Desktop/codec_dump.txt

What about the error

with clover



#4
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

The error is about your video (HD 4000) kexts.

For fix this, you need use a right value for load the HD 4000 kexts.



#5
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

The error is about your video (HD 4000) kexts.

For fix this, you need use a right value for load the HD 4000 kexts.

I installed VoodooBattery and now my serial number is unavailable 



#6
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

Let's do step by step, the battery is less important now.

 

You already fixed video and áudio?



#7
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

Let's do step by step, the battery is less important now.

 

You already fixed video and áudio?

no i fixed just video and battery

no audio



#8
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

Ok.

If VoodooBattery cause problems for you, you can try ACPIBatteryManager.

Delete Voodoo and repair the disk permissions.


For audio, follow what i told you above. Linux etc...



#9
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

Ok.

If VoodooBattery cause problems for you, you can try ACPIBatteryManager.

Delete Voodoo and repair the disk permissions.


For audio, follow what i told you above. Linux etc...

i know my codec its : IDT (SigmaTel) C-Major HD Audio (STAC92xx)



#10
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

No! This is your Driver!

 

You need inform us what is your codec!



#11
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

No! This is your Driver!

 

You need inform us what is your codec!

Here http://unloadfile.com/2c633de8f35bf320 or

Codec: IDT 92HD91BXX
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x111d76e0
Subsystem Id: 0x103c1894
Revision Id: 0x100102
No Modem Function Group found
Default PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 D3cold S3D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=5, o=0, i=0, unsolicited=1, wake=1
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
  IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x06
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
  Amp-In caps: N/A
  Amp-In vals:  [0x00 0x00]
  Pincap 0x0001173c: IN OUT HP EAPD Detect
    Vref caps: HIZ 50 GRD 80
  EAPD 0x2: EAPD
  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00: VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 3
     0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
  Control: name="Headphone Jack", index=0, device=0
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x0421101f: [Jack] HP Out at Ext Right
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states: 
  Power: setting=D0, actual=D0
  Connection: 3
     0x13* 0x14 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Jack", index=0, device=0
  Amp-In caps: N/A
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00011734: IN OUT EAPD Detect
    Vref caps: HIZ 50 GRD 80
  EAPD 0x2: EAPD
  Pin Default 0x04a11020: [Jack] Mic at Ext Right
    Conn = 1/8, Color = Black
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Power states: 
  Power: setting=D0, actual=D0
  Connection: 3
     0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400501: Stereo
  Control: name="Speaker Phantom Jack", index=0, device=0
  Pincap 0x00010050: OUT EAPD Balanced
  EAPD 0x2: EAPD
  Pin Default 0x92170110: [Fixed] Speaker at Int Front
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Power states: 
  Power: setting=D0, actual=D0
  Connection: 3
     0x13 0x14* 0x1c
Node 0x0e [Pin Complex] wcaps 0x400583: Stereo Amp-In
  Amp-In caps: N/A
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00010034: IN OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 3
     0x13* 0x14 0x1c
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
  Amp-In caps: N/A
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00010034: IN OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 3
     0x13* 0x14 0x1c
Node 0x10 [Pin Complex] wcaps 0x400500: Mono
  Pincap 0x00000010: OUT
  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 1
     0x1a
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
  Control: name="Internal Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Internal Mic Phantom Jack", index=0, device=0
  Amp-In caps: N/A
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000024: IN Detect
  Pin Default 0xd5a30130: [Both] Mic at Int Top
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states: 
  Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
  Amp-In caps: N/A
  Amp-In vals:  [0x00 0x00]
  Power states: 
  Power: setting=D0, actual=D0
  Connection: 1
     0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="92HD91BXX Analog", type="Audio", device=0
  Amp-Out caps: N/A
  Amp-Out vals:  [0x64 0x64]
  Converter: stream=8, channel=0
  Power states: 
  Power: setting=D0, actual=D0
  Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: N/A
  Amp-Out vals:  [0x64 0x64]
  Converter: stream=8, channel=0
  Power states: 
  Power: setting=D0, actual=D0
  Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
  Device: name="92HD91BXX Analog", type="Audio", device=0
  Converter: stream=4, channel=0
  SDI-Select: 0
  Power states: 
  Power: setting=D0, actual=D0
  Delay: 13 samples
  Connection: 1
     0x17
  Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
  Converter: stream=0, channel=0
  SDI-Select: 0
  Power states: 
  Power: setting=D3, actual=D3
  Delay: 13 samples
  Connection: 1
     0x18
  Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
  Amp-Out vals:  [0x1c 0x1c]
  Power states: 
  Power: setting=D0, actual=D0
  Connection: 7
     0x1b 0x0a 0x0c 0x0e 0x0f 0x11* 0x12
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
  Amp-Out caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
  Amp-Out vals:  [0x90 0x90]
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 7
     0x1b* 0x0a 0x0c 0x0e 0x0f 0x11 0x12
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 3
     0x13* 0x14 0x1c
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 1
     0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=3, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=3, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Power states: 
  Power: setting=D0, actual=D0
  Connection: 6
     0x13 0x14 0x0a 0x0c 0x0e 0x0f
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 1
     0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Power states: 
  Power: setting=D3, actual=D3
  Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Power states: 
  Power: setting=D3, actual=D3
  Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 1
     0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states: 
  Power: setting=D3, actual=D3
  Connection: 1
     0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
  Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
  Amp-Out vals:  [0x01]
  Power states: 
  Power: setting=D0, actual=D0
Node 0x22 [Vendor Defined Widget] wcaps 0xf00001: Stereo



#12
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

Try this: http://www.hackintos...-idt-92hd91bxx/



#13
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

nope its not working !!!



#14
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

nope its not working !!!

 

Apply a patch in your DSDT or Clover: http://clover-wiki.z...n/Devices#Audio



#15
mnfesq

mnfesq

    Emenef, Esquire

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,184 posts
  • Gender:Male
  • Location:Southern California

Try my audio driver package.  I install the VoodooHDA.kext and the AppleHDADisabler.kext in the appropriate kext folder in Clover.  The prefpane gets installed like any other prefpane and the VoodooHDASettingsLoader can be placed in your applications directory and set to load upon boot.  If you don't have a working OS X installation yet, just use the 2 kexts and save the other stuff for later.  BTW, this works not only for my speakers but also for my subwoofer.

 

Attached File  VooDooHDA.zip   1014.44KB   9 downloads

 

P.S. - Our systems are fairly similar.  If you need my Clover config.plist or anything else, just post what doesn't work here and I'll see if I have something that will fix it.



#16
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

Try my audio driver package.  I install the VoodooHDA.kext and the AppleHDADisabler.kext in the appropriate kext folder in Clover.  The prefpane gets installed like any other prefpane and the VoodooHDASettingsLoader can be placed in your applications directory and set to load upon boot.  If you don't have a working OS X installation yet, just use the 2 kexts and save the other stuff for later.  BTW, this works not only for my speakers but also for my subwoofer.

 

attachicon.gifVooDooHDA.zip

 

P.S. - Our systems are fairly similar.  If you need my Clover config.plist or anything else, just post what doesn't work here and I'll see if I have something that will fix it.

can you please give me your clover folder !!!! I want to do clean install!!



#17
Allan

Allan

    V.I.P. Member

  • Supervisors
  • 11,526 posts
  • Gender:Male

can you please give me your clover folder !!!! I want to do clean install!!

 

A small correction here, but...use Clover folder doesn't turn your Mac "clean", use Clover folders is a "shortcut" for get the OS X working, but is the same effect if you install the modified .kexts in S/L/E or another place.



#18
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

A small correction here, but...use Clover folder doesn't turn your Mac "clean", use Clover folders is a "shortcut" for get the OS X working, but is the same effect if you install the modified .kexts in S/L/E or another place.

Thanks!

I will keep that in Mind



#19
NihalPandit

NihalPandit

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts
  • Gender:Male
  • Location:Canada
  • Interests:Web Development and Programming

A small correction here, but...use Clover folder doesn't turn your Mac "clean", use Clover folders is a "shortcut" for get the OS X working, but is the same effect if you install the modified .kexts in S/L/E or another place.

Hi,

 

now I am trying to install 10.11 but my patched dsdt is not working







Also tagged with one or more of these keywords: Yosemite, 10.10, hp envy, ivy bridge, intel hd, 4000, hp, post


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy