ifrit05 Posted May 26, 2015 Share Posted May 26, 2015 Hey all. Disclaimer: This is not, by far, my first time trying to create a Hackintosh. Been around since the Tiger days. I currently have Yosemite installed on my HP EliteBook 8470p, I also own quite a few older PPC Macs. To the issue at hand: I can't quite seem to get the newest (3202) Clover to boot the installer correctly from USB. If I boot normally I get the "Waiting on ...IOProviderClass...boot-uuid-media" error. I understand this means the system hangs due to it not seeing any root boot device. I have tried putting GenericUSBXHCI.kext in the 10.10 folder in the EFI partition to no avail. If I boot without injected kexts it boots to the point where it exits verbose mode and hangs on a grey screen with the spinner. This is due to FakeSMC not being loaded AFAIK. (Due to Clover not actually injecting kexts, as the option states) Specs: Maximus VII Hero i5-4690k R9 280X 8GB DDR3 1600 I know people got it to work around the web using Chameleon but I want to be able to have a more "native" approach with Clover (Recovery Partition, and all the extra stuff that Clover does, not to mention it being a UEFI boot manager) instead of enabling CSM + UEFI. Any help would be appreciated. Link to comment Share on other sites More sharing options...
SummerRain Posted May 26, 2015 Share Posted May 26, 2015 Have you replaced VBoxHfs-64.efi in the drivers64UEFI folder with HFSPlus.efi? Link to comment Share on other sites More sharing options...
ifrit05 Posted May 26, 2015 Author Share Posted May 26, 2015 Yup. That, and I add the Aptio Memory fix thing as the wont get past the "Boot UUID is:" Prompt".Also, Now it's Panicing and giving me the dreaded "Can not find a driver for this platform", ACPI Error. I tired remaking the install media and tried diferent versions of Clover. I'm at a loss. I know someone else got this board to work. I've tried editing my SMBIOS to say it's a iMac15,1, as thats the closest thing to my hardware I have. That didn't work either. Link to comment Share on other sites More sharing options...
hodenhagen Posted May 26, 2015 Share Posted May 26, 2015 have copy the kernel to USBInstaller/System/Library/Kernels ? Fakesmc.kext is in /EFIClover/Kexts/10.10 ? "Boot UUID is:" Prompt". this is problem with UEFI drivers, try put Fakesmc.kext to S/L/E Link to comment Share on other sites More sharing options...
ifrit05 Posted May 27, 2015 Author Share Posted May 27, 2015 I got the problem resolved by editing my config.plist. Thanks for taking the time to help anyways. Link to comment Share on other sites More sharing options...
baychae Posted November 24, 2016 Share Posted November 24, 2016 Can you go into more detail? Link to comment Share on other sites More sharing options...
Recommended Posts