Alex1236 Posted May 20, 2015 Share Posted May 20, 2015 I've been trying to hackintosh my HP laptop for a day or two, but haven't been able to get it working. I've had errors from the OS X installer at the end from Undefined error to just having a frozen installer, and when I try to convert the .dmg file to a .img with dmg2img, half the time I get errors that the dmg file is corrupted or it will freeze or say inflation failed for the last partition of the .dmg. So does anyone have any ideas why I'm having these problems and how I can fix them? Most of the builds where I get dmg file is corrupted are from HackintoshZone. I'm using this guide from @Ratul Link to comment Share on other sites More sharing options...
SummerRain Posted May 20, 2015 Share Posted May 20, 2015 I recommend creating the installer USB under Mac OS. Link to comment Share on other sites More sharing options...
Alex1236 Posted May 20, 2015 Author Share Posted May 20, 2015 I recommend creating the installer USB under Mac OS. I would but I don't have access to a mac or any form of OS X right now and am not able to borrow a laptop from a friend or something, and I can't get OS X running in a VM. Link to comment Share on other sites More sharing options...
Allan Posted May 20, 2015 Share Posted May 20, 2015 Hello Alex, welcome to InsanelyMac Forum! You can download OS X .raw in Olarila Forum, burn in your Pendrive and start the OS X installation following the instructions. Would be nice if you post here what is your hardware specs. Link to comment Share on other sites More sharing options...
Alex1236 Posted May 21, 2015 Author Share Posted May 21, 2015 Hello Alex, welcome to InsanelyMac Forum! You can download OS X .raw in Olarila Forum, burn in your Pendrive and start the OS X installation following the instructions. Would be nice if you post here what is your hardware specs. I'm trying to install to a laptop, specifically an HP Pavilion dv6-3225dx. Link to comment Share on other sites More sharing options...
Allan Posted May 21, 2015 Share Posted May 21, 2015 HP Pavilion dv6-3225dx, nice, but we need the hardware specs! CPU/Motherboard/Chipset/RAM/Video...etc... Link to comment Share on other sites More sharing options...
Alex1236 Posted May 21, 2015 Author Share Posted May 21, 2015 HP Pavilion dv6-3225dx, nice, but we need the hardware specs! CPU/Motherboard/Chipset/RAM/Video...etc... Microprocessor 2.26GHz Intel Core i3-350M Processor Microprocessor Cache 3MB L3 Cache Memory 4GB DDR3 System Memory (2 DIMM) Memory Max 8GB Video Graphics Intel HD Graphics Video Memory Up to 1696MB Hard Drive 500GB (5400RPM) Multimedia Drive LightScribe SuperMulti 8X DVD±R/RW with Double Layer Support Display 15.6" diagonal High-Definition HP BrightView LED Display (1366 x 768) Fax/Modem Network Card Integrated 10/100/1000 Gigabit Ethernet LAN Wireless Connectivity 802.11 a/b/g/n Dual-Band WLAN + WiMAX combo cards with WiDi (36) Sound Dolby Advanced Audio with Altec Lansing speakers Keyboard 101-key compatible with island-style full-size keyboard Pointing Device HP Clickpad with On/Off button PC Card Slots External Ports 5-in-1 integrated Digital Media Reader for Secure Digital cards, MultiMedia cards, Memory Stick, Memory Stick Pro, or xD Picture cards 4 Universal Serial Bus (USB) 2.0, 4th port shared with eSATA 1 HDMI 1 VGA (15-pin) 1 RJ -45 (LAN) 1 Headphone-out 1 Microphone-in There's the specs, it has a finger print reader by the way so is that a problem at all? Assuming you probably have access to a mac would you be able to make me a custimized intall file or something? I'm not able to get access to a mac and I can't get my VM working for some reason, even after following a guide that @SummerRain PM'd me. Link to comment Share on other sites More sharing options...
Allan Posted May 21, 2015 Share Posted May 21, 2015 I send a Olarila method for you via PM. And after you install OS X, you need follow this guide: [GUIDE] 1st Generation Intel HD Graphics QE/CI Finger reader don't work in any OS X, because Apple don't use it. Link to comment Share on other sites More sharing options...
Alex1236 Posted May 21, 2015 Author Share Posted May 21, 2015 I send a Olarila method for you via PM. And after you install OS X, you need follow this guide: [GUIDE] 1st Generation Intel HD Graphics QE/CI Finger reader don't work in any OS X, because Apple don't use it. Already tried Olarila method you talked about in an earlier post Have already tried this, only way to boot is with -v cpus=1 common hp laptop problem I've heard but than I still get errors that prevent the OS from booting, I'll list them when I see them again since I can't remember of the top of my head. , but haven't tried the Intel 1st gen graphics guide, so I'll look at that. Link to comment Share on other sites More sharing options...
Allan Posted May 21, 2015 Share Posted May 21, 2015 If you have problems on boot OS X, and use -v boot argument, post a pic here for analysis. Link to comment Share on other sites More sharing options...
Alex1236 Posted May 21, 2015 Author Share Posted May 21, 2015 If you have problems on boot OS X, and use -v boot argument, post a pic here for analysis. http://imgur.com/MEZnCE8 Link to comment Share on other sites More sharing options...
Allan Posted May 21, 2015 Share Posted May 21, 2015 Delete the Intel video kexts: How to delete kexts for enable video. After that, follow the guide for enable your Intel HD. And reinstalling only the kexts modified. Link to comment Share on other sites More sharing options...
Alex1236 Posted May 21, 2015 Author Share Posted May 21, 2015 Delete the Intel video kexts: How to delete kexts for enable video. After that, follow the guide for enable your Intel HD. And reinstalling only the kexts modified. This laptop only has 1 graphics type, integrated Intel HD Graphics. Also how to add/edit Kexts? Do I do this in clover bootloader or? I don't have access to a mac. Link to comment Share on other sites More sharing options...
Allan Posted May 21, 2015 Share Posted May 21, 2015 In the link that i sent to you, you can find this: Boot with single user. (Clover press space bar and select "Boot with single user" and with you use Chameleon use this flag -s) Even if you have 1 Graphics, sometimes you need move the kexts temporarily for enable video, and avoid problems, like yours: iobluetoothhcicontroller missing bluetooth controller transport Link to comment Share on other sites More sharing options...
Alex1236 Posted May 22, 2015 Author Share Posted May 22, 2015 In the link that i sent to you, you can find this: Even if you have 1 Graphics, sometimes you need move the kexts temporarily for enable video, and avoid problems, like yours: iobluetoothhcicontroller missing bluetooth controller transport When I try to type in the commands for deleting the Intel Video kexts, I get nothing, the ls command doesn't do anything and when I use cd to change directory to /volumes/ it doesn't report anything back and it just goes back to bash-3.2# and doesn't tell me the directory I'm currently in. (unless it isn't supposed to tell me what directory I'm in?), and If I just type in cd it gives me: cd: HOME not set Link to comment Share on other sites More sharing options...
Allan Posted May 22, 2015 Share Posted May 22, 2015 Ok, try boot with this flags: PCIRootUID=1 -f -v -x Use Chameleon for this. Link to comment Share on other sites More sharing options...
Alex1236 Posted May 23, 2015 Author Share Posted May 23, 2015 Ok, try boot with this flags: PCIRootUID=1 -f -v -x Use Chameleon for this. Just tried it and got this screen, I'm gonna try to boot with cpus=1 PCIRootUID=1 -f -v -x What I get when I boot with: cpus=1 PCIRootUID=1 -f -v -x Imgur Imgur2 Link to comment Share on other sites More sharing options...
hodenhagen Posted May 23, 2015 Share Posted May 23, 2015 where is Fakesmc.kext ? if you not have this kext in Extra/Extensions or S/L/E of your USBInstaller this never go to work Link to comment Share on other sites More sharing options...
Alex1236 Posted May 23, 2015 Author Share Posted May 23, 2015 where is Fakesmc.kext ? if you not have this kext in Extra/Extensions or S/L/E of your USBInstaller this never go to work Uhh, no idea? Can I just google search FakeSMC.kext download and put it in the right directory and try to boot again, or can you get me a link to one? EDIT I just found one on you know who X86, will it work? Also, not able to see the drive when I plug it in anymore, so I'll have to reimage the drive with Yosemite again and try to add FakeSMC.kext to it. Link to comment Share on other sites More sharing options...
Allan Posted May 23, 2015 Share Posted May 23, 2015 For FakeSMC you can use this: http://sourceforge.net/projects/hwsensors/?source=recommended Just don't install the anthers plugins, only FakeSMC. Link to comment Share on other sites More sharing options...
Recommended Posts