Jump to content

iCloud, iMessage... no way to get work!


24 posts in this topic

Recommended Posts

I've installed Yosemite with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], actually i'm using Chameleon. The problem is the next: I can't sign in with my iCloud account to sync my Notes, Messages, Calendar and things like that. I already tested a LOT of proceeds written on the internet, but no one worked.

Note: I'm using a wireless adapter because here in my room do not have ethernet cable, and also hackintosh don't detect my ethernet card.

 

I have FileNVRAM on the modules folder.

 

 

org.chameleon.Boot

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>DropSSDT</key>
<string>Yes</string>
<key>SMboardserial</key>
<string>CK148614DB6F940D2</string>
<key>SMsystemuuid</key>
<string>a8dd17a0-cf10-4323-9841-29a9f08c1d49</string>
<key>SMchassisserial</key>
<string>CK129U13DB67</string>
<key>SMserial</key>
<string>CK129U13DB67</string>
</dict>
</plist>
 
NetworkInterfaces
 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Interfaces</key>
<array>
<dict>
<key>Active</key>
<true/>
<key>BSD Name</key>
<string>en0</string>
<key>IOBuiltin</key>
<false/>
<key>IOInterfaceNamePrefix</key>
<string>en</string>
<key>IOInterfaceType</key>
<integer>6</integer>
<key>IOInterfaceUnit</key>
<integer>0</integer>
<key>IOMACAddress</key>
<data>
6E4GG+gE
</data>
<key>IOPathMatch</key>
<string>IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EUSB@1D,7/AppleUSBEHCI/802.11n WLAN Adapter@fd800000/IOUSBInterface@0/RTL8192CU/en0</string>
<key>SCNetworkInterfaceInfo</key>
<dict>
<key>USB Product Name</key>
<string>802.11n WLAN Adapter</string>
<key>UserDefinedName</key>
<string>802.11n WLAN Adapter</string>
<key>idProduct</key>
<integer>33142</integer>
<key>idVendor</key>
<integer>3034</integer>
</dict>
<key>SCNetworkInterfaceType</key>
<string>Ethernet</string>
</dict>
<dict>
<key>Active</key>
<true/>
<key>BSD Name</key>
<string>en1</string>
<key>IOBuiltin</key>
<false/>
<key>IOInterfaceNamePrefix</key>
<string>en</string>
<key>IOInterfaceType</key>
<integer>6</integer>
<key>IOInterfaceUnit</key>
<integer>1</integer>
<key>IOMACAddress</key>
<data>
ABWDB81d
</data>
<key>IOPathMatch</key>
<string>IOService:/IOResources/IOUserEthernetResource/IOUserEthernetResourceUserClient/IOUserEthernetController/en1</string>
<key>SCNetworkInterfaceInfo</key>
<dict>
<key>UserDefinedName</key>
<string>Bluetooth PAN</string>
</dict>
<key>SCNetworkInterfaceType</key>
<string>Ethernet</string>
</dict>
</array>
<key>Model</key>
<string>iMac14,2</string>
</dict>
</plist>
 

post-994051-0-66554100-1432141500_thumb.png

Link to comment
Share on other sites

What's the spec of your system? If your system supports EFI, I really recommend you to use Clover instead. Everything thing works OOB with Clover once you have setup the right serial number. Mine has been running flawlessly since day one. No patches needed. Just inject serial numbers into the Clover SMBIOS.

  • Like 1
Link to comment
Share on other sites

I don't think the 5 series supports UEFI. You can install Clover legacy as well but I am not sure if it works the same as the EFI variant in terms of iMessage and iCloud. I am new to the Hackintosh community. Probably others can answer your question.

 

I found a guide on the forum regarding Clover and iMessage.

http://www.insanelymac.com/forum/topic/302347-clover-imessagefacetime-fix-for-yosemite/

Link to comment
Share on other sites

Motherboard ASUS P5KPL

Graphic card ASUS Nvidia GeForce 210

3GB

1TB

 

If your motherboard is this model, you don't have UEFI support.

 

I don't think the 5 series supports UEFI. You can install Clover legacy as well but I am not sure if it works the same as the EFI variant in terms of iMessage and iCloud. I am new to the Hackintosh community. Probably others can answer your question.

 

I found a guide on the forum regarding Clover and iMessage.

http://www.insanelymac.com/forum/topic/302347-clover-imessagefacetime-fix-for-yosemite/

 

For iMessage and iCloud works property, you need a valid serial number and MLB, ROM. Only with Clover of course!

Link to comment
Share on other sites

What importance have my motherboard have it or not? Because I got Mavericks and Yosemite with [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url]...

U_nibeas_t (why is forbidden write this word?)

Link to comment
Share on other sites

What importance have my motherboard have it or not? Because I got Mavericks and Yosemite with #####...

U_nibeas_t (why is forbidden write this word?)

Read the forum rules  :)

http://www.insanelymac.com/forum/topic/279451-why-insanelymac-does-not-support-tonymacx86/

 

Try to install it yourself using Clover. You will get a lot more control over those all in one package. You will get a lot better support here as well.

Link to comment
Share on other sites

hello. I managed to install mavericks using clover, but there is a problem: I can not boot the system without using the stick with the installation file of Mavericks. if I turn on my computer without the USB stick the bootloader loads, I choose to start the system, it's lotada and soon after, the computer restarts. but if I use the bootloader that is on the USB stick can boot normally. what I need do?

About iCloud, I tried login, but i could not, said me one message of error. After installing Mavericks, i need to do anything else in order to get it work?

Link to comment
Share on other sites

hello. I managed to install mavericks using clover, but there is a problem: I can not boot the system without using the stick with the installation file of Mavericks. if I turn on my computer without the USB stick the bootloader loads, I choose to start the system, it's lotada and soon after, the computer restarts. but if I use the bootloader that is on the USB stick can boot normally. what I need do?

About iCloud, I tried login, but i could not, said me one message of error. After installing Mavericks, i need to do anything else in order to get it work?

I probably got a KP. Can you boot with -v and let us know what's causing the KP? Please also tell us what boot flags you are using.

Link to comment
Share on other sites

Dude, really thanks, but I'll install again using Unib... It's more easy and I guess iCloud will not work also using Clover method. I'll try fix iCloud again using Unib, but this way running Mavericks... If does not work, patience...

Link to comment
Share on other sites

 Share

×
×
  • Create New...