Toemouse Posted May 3, 2015 Share Posted May 3, 2015 My rig is; Intel Core i7 4790K (using this for Intel HD4600) MSI Z97 PCMATE No Bluetooth TDN4800 Natively compatible wifi card I am trying to use Niresh 10.10.1 to install as I have no access to any real mac or hackintosh currently. Once I get this installed I plan to make a vanilla installer USB. Every single time I either get in to the installer or before that even fully boots I get an error "Debugger not configured. Hanging." It will just freeze, I know my system is compatible with OS X but I have no idea how to fix this. I have been using the bootflags "/haswell npci=0x3000 GraphicsEnabler=No IGPEnabler=Yes ig-platform-id=0x0D220003 -v -x" and still nothing is working. I had Niresh up and running before just using /haswell -v -x but now it won't load at all. Any help at all would be appreciated so much. Thank you Link to comment Share on other sites More sharing options...
mac09hack Posted May 3, 2015 Share Posted May 3, 2015 I would suggest you looking at Rampagedev.com for help. The best way to build a bootable USB for Yosemite is using a MAC but there are other ways. You can ask questions on the April Questions page Link to comment Share on other sites More sharing options...
crusher Posted May 3, 2015 Share Posted May 3, 2015 Try this. Use a Ozmosis download OZ file and flash bios. After flash bios settings your bios like this: AHCI-Mode : Enabled XHCI-Mode : Auto XHCI-Hand Off : Enabled EHCI-Hand Off : Enabled vt-D f : Disable Wake On Lan : Disable Secure Boot : Disable CPU EIST : Disable Internal Processor Graphics Memory: 32M <- Imprtant: your does not work change to 64/96 DVMT Total Memory Size : MAX Intel Speedstep: Disabled Good luck!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts