[Risolto] Problema caricamento mavericks 10.9.5 con clover

Ghera · April 22, 2015

Ciao a tutti,

ho une problema con il bootloader clover. Il mio hackintosh ha funzionato perfettamente fino a quando non ho fatto l’aggiornamento di mavericks dalla 10.9.2 alla 10.9.5.

La prima installazione (10.9.2) l’avevo fatta utilizzando ##### e mutlibeast, e successivamente, per far funzionare iMessage, avevo installato clover, e fino a qui tutto OK.

Dopo l'aggiornamento a 10.9.5 non riesco a capire cosa possa essere successo. In pratica, all’accensione mi rimane sul menu del bootloader di clover anche quando selezionato l'hd dove è installato OSX (non si presenta la classica schermata di caricamento del sistema), mentre con chimera funziona tutto correttamente. Ho lasciato attiva l’opzione log del boot di clover per avere un’idea di dove si bloccasse il caricamento… ecco il debug.log

0:100  0:100  MemLog inited, TSC freq: 30999963090:100  0:000  0:100  0:000  Now is 22.4.2015,  8:33:21 (GMT+2047)0:100  0:000  Starting Clover rev 2999 on American Megatrends EFI0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,B40D4D3F-75B4-43BC-90CA-0D3E0B7151C2,0x28,0x64000) @C08486980:100  0:000  SelfDirPath = \EFI\BOOT0:100  0:000  Total Memory Slots Count = 40:100  0:000  Type 17 Index = 00:100  0:000  SmbiosTable.Type17->Speed = 1600MHz0:100  0:000  SmbiosTable.Type17->Size = 8192MB0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM00:100  0:000  Type 17 Index = 10:100  0:000  Ignoring insane frequency value 0MHz0:100  0:000  SmbiosTable.Type17->Speed = 0MHz0:100  0:000  SmbiosTable.Type17->Size = 0MB0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM10:100  0:000  Type 17 Index = 20:100  0:000  SmbiosTable.Type17->Speed = 1600MHz0:100  0:000  SmbiosTable.Type17->Size = 8192MB0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM00:100  0:000  Type 17 Index = 30:100  0:000  Ignoring insane frequency value 0MHz0:100  0:000  SmbiosTable.Type17->Speed = 0MHz0:100  0:000  SmbiosTable.Type17->Size = 0MB0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM10:100  0:000  Boot status=00:100  0:000  Clover revision: 2999  running on Z87M-D3H0:100  0:000  ... with board Z87M-D3H0:100  0:000  Clover load options size = 0 bytes0:103  0:003  Using OEM config.plist at path: EFI\CLOVER\config.plist0:104  0:000  EFI\CLOVER\config.plist loaded: Success0:106  0:002  Found theme BOOTCAMP0:108  0:002  Found theme christmas0:111  0:002  Found theme NEWYEAR0:113  0:002  Loading early settings0:113  0:000  timeout set to 200:113  0:000  Custom boot CUSTOM_BOOT_APPLE (0x0)0:128  0:014  KextsToPatch: 1 requested0:130  0:002  KextToPatch 0: AppleAHCIPort (External icons patch) Kext bin patch, data len: 80:138  0:008  Hiding entries with string Windows0:140  0:002  Hiding entries with string \EFI\BOOT\BOOTX64.EFI0:144  0:003  LoadDrivers() start0:147  0:003  Loading FSInject-64.efi0:150  0:003  load image status=Success0:153  0:002  Loading OsxAptioFixDrv-64.efi0:156  0:003  load image status=Success0:158  0:002  Loading OsxFatBinaryDrv-64.efi0:162  0:003  load image status=Success0:164  0:002  Loading HFSPlus.efi0:167  0:003  load image status=Success0:170  0:002   - driver needs connecting0:172  0:002  1 drivers needs connecting ...0:174  0:002  PlatformDriverOverrideProtocol->GetDriver overriden0:177  0:003  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok0:284  0:106  LoadDrivers() end0:286  0:002  SetMaxResolution: found best mode 4: 1920x10800:620  0:334  Video mode change to mode #4: Success0:626  0:005   - set0:628  0:002  Console modes reported: 4, available modes:0:630  0:002    Mode 1: 80x25 (current mode)0:632  0:002    Mode 2: 80x500:634  0:002    Mode 3: 100x310:636  0:002    Mode 4: 128x300:640  0:003  SetScreenResolution: 1920x1080 - already set0:644  0:004  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,B40D4D3F-75B4-43BC-90CA-0D3E0B7151C2,0x28,0x64000)0:646  0:002  CPU Vendor = 756E6547 Model=306C30:648  0:002  The CPU supported turbo0:650  0:002  BrandString = Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz0:652  0:002  MSR 0xE2 before patch 1E0004020:654  0:002  MSR 0xE4              000018140:656  0:002  MSR 0xCE              00080838_F3011F000:660  0:003  non-usable FLEX_RATIO = 100000:661  0:001  corrected FLEX_RATIO = 00:663  0:002  FSBFrequency=100MHz DMIvalue=100000kHz0:666  0:002  Corrected FSBFrequency=100MHz0:668  0:002  Vendor/Model/Stepping: 0x756E6547/0x3C/0x30:670  0:002  Family/ExtFamily: 0x6/0x00:672  0:002  MaxDiv/MinDiv: 31.0/80:674  0:002  Turbo: 33/33/33/330:676  0:002  Features: 0xBFEBFBFF0:678  0:002  Threads: 40:680  0:002  Cores: 40:682  0:002  FSB: 100 MHz0:684  0:002  CPU: 3100 MHz0:686  0:002  TSC: 3100 MHz0:690  0:003  PIS: 400 MHz0:692  0:002  PCI (00|00:00.00) : 8086 0C00 class=0600000:694  0:002  PCI (00|00:01.00) : 8086 0C01 class=0604000:696  0:002  PCI (00|01:00.00) : 10DE 1187 class=0300000:698  0:002  Found NVidia model=EVGA GeForce GTX 7600:700  0:002  PCI (00|01:00.01) : 10DE 0E0A class=0403000:702  0:002  PCI (00|00:14.00) : 8086 8C31 class=0C03300:704  0:002  PCI (00|00:16.00) : 8086 8C3A class=0780000:706  0:002  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF0:708  0:002  PCI (00|00:1A.00) : 8086 8C2D class=0C03200:712  0:003  PCI (00|00:1B.00) : 8086 8C20 class=0403000:714  0:002  PCI (00|00:1C.00) : 8086 8C10 class=0604000:716  0:002  PCI (00|00:1C.02) : 8086 8C14 class=0604000:718  0:002  PCI (00|03:00.00) : 10EC 8168 class=0200000:720  0:002  PCI (00|00:1C.03) : 8086 244E class=0604010:722  0:002  PCI (00|04:00.00) : 8086 244E class=0604010:724  0:002  PCI (00|00:1C.04) : 8086 8C18 class=0604000:726  0:002  PCI (00|06:00.00) : 168C 0030 class=0280000:730  0:003  PCI (00|00:1D.00) : 8086 8C26 class=0C03200:732  0:002  PCI (00|00:1F.00) : 8086 8C44 class=0601000:734  0:002  PCI (00|00:1F.02) : 8086 8C02 class=0106010:736  0:002  PCI (00|00:1F.03) : 8086 8C22 class=0C05000:738  0:002  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF0:740  0:002  ScanSPD() start0:742  0:002  SMBus CmdReg: 0x10:744  0:002  Scanning SMBus [8086:8C22], mmio: 0xF3315004, ioport: 0xF000, hostc: 0x10:761  0:016  SPD[0]: Type 11 @0x50 0:771  0:010  Found module with XMP version 1.3DDR speed 1600MHz 0:777  0:005  Slot: 0 Type 24 8192MB 1600MHz Vendor=Corsair PartNo=CMZ16GX3M2A1600C10 SerialNo=0000000000000000 0:799  0:022  SPD[2]: Type 11 @0x52 0:810  0:010  Found module with XMP version 1.3DDR speed 1600MHz 0:820  0:010  Slot: 2 Type 24 8192MB 1600MHz Vendor=Corsair PartNo=CMZ16GX3M2A1600C10 SerialNo=0000000000000000 0:949  0:128  ScanSPD() end0:951  0:002  Get Acpi Tables List from RSDT:0:955  0:004   Found table: FACP  A M I len=1320:957  0:002   Found table: APIC  A M I len=1140:961  0:003   Found table: FPDT  A M I len=680:963  0:002   Found table: SSDT  Cpu0Ist len=13370:965  0:002   Found table: SSDT  CpuPm len=27760:967  0:002   Found table: MCFG   len=600:969  0:002   Found table: HPET  A M I len=560:971  0:002   Found table: SSDT  SataTabl len=8770:973  0:002   Found table: SSDT  SaSsdt  len=129530:975  0:002  Calibrated TSC frequency =3099996309 =3099MHz0:977  0:002  Loading main settings0:979  0:002  Config set ChassisType=0x60:983  0:003  found 6 volumes with blockIO0:985  0:002   0. Volume:0:987  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)0:989  0:002    Result of bootcode detection: bootable unknown (legacy)0:991  0:002   1. Volume:0:994  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)0:996  0:002   2. Volume:0:998  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,B40D4D3F-75B4-43BC-90CA-0D3E0B7151C2,0x28,0x64000)1:001  0:002    Result of bootcode detection: bootable unknown (legacy)1:004  0:003    This is SelfVolume !!1:007  0:002   3. Volume:1:009  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,CD35DBC1-23D5-43C7-8330-7CF7EAC12CED,0x64028,0xDEF0B60)1:011  0:002    Result of bootcode detection: bootable unknown (legacy)1:013  0:002   4. Volume:1:015  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,5E007DE6-3746-4309-B97D-E2C570124BE3,0x28,0x64000)1:018  0:002    Result of bootcode detection: bootable unknown (legacy)1:041  0:022   5. Volume:1:043  0:002    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,EE55C490-265D-4EC2-85B5-9A283194AB07,0x64028,0x74662D60)1:045  0:002  no default theme, get random theme theme.plist1:048  0:002  Using theme 'BOOTCAMP' (EFI\CLOVER\themes\BOOTCAMP)1:050  0:002  Choosing theme BOOTCAMP1:052  0:002  Custom entries start1:055  0:002  Custom entries finish1:057  0:002  Scanning loaders...1:059  0:002   0: 'Whole Disc Boot' no file system1:063  0:004   1: 'Whole Disc Boot' no file system1:068  0:005   2: 'EFI'1:119  0:050      AddLoaderEntry for Volume Name=EFI1:121  0:002     hiding entry: \EFI\BOOT\BOOTX64.efi1:123  0:002   3: 'Macintosh HD'1:129  0:005      AddLoaderEntry for Volume Name=Macintosh HD1:134  0:004      Check if volume Is Hibernated:1:136  0:002      Check sleep image 'by signature':1:142  0:006      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success1:144  0:002      SleepImage name from pref: ImageVolume = 'Macintosh HD', ImageName = '\private\var\vm\sleepimage'1:150  0:005      sleepimage not found -> Not Found1:152  0:002       hibernated: no - sign1:257  0:105      AddLoaderEntry for Volume Name=Macintosh HD1:259  0:002     hiding entry: \EFI\BOOT\BOOTX64.efi1:261  0:002   4: 'EFI'1:305  0:043   5: 'Macintosh HD 2'1:349  0:043  Custom legacy start1:351  0:002  Custom legacy end1:353  0:002  Custom tool start1:355  0:002  Custom tool end1:362  0:007  GetEfiBootDeviceFromNvram: efi-boot-device-data not found1:368  0:005  EfiBootVolume not found1:370  0:002   found entry 0. 'Boot Mac OS X from Macintosh HD', Volume 'Macintosh HD', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,CD35DBC1-23D5-43C7-8330-7CF7EAC12CED,0x64028,0xDEF0B60)\System\Library\CoreServices\boot.efi'1:372  0:002  DefaultIndex=0 and MainMenu.EntryCount=51:374  0:002  Use anime=logo_3D frames=503:253  1:879  Found Mouse device:3:256  0:002  GUI ready8:881  5:625  Boot option Boot0000 not found8:888  0:007  StartLoader() start8:890  0:002  Finally: Bus=99999kHz CPU=3099MHz8:892  0:002  Kernel and Kext Patches:8:894  0:002  	Allowed: y8:896  0:002  	Debug: n8:898  0:002  	KernelCpu: n8:900  0:002  	Lapic: n8:902  0:002  	AICPUPM: y8:904  0:002  	AppleRTC: y8:906  0:002  	KernelPm: y8:908  0:002  	FakeCPUID: 0x08:910  0:002  	ATIController: <null string>8:913  0:002  	ATIDataLength: 08:915  0:002  	0 Kexts to load8:917  0:002  	1 Kexts to patch8:920  0:003  	  KextPatch[0]: 8 bytes, AppleAHCIPort8:922  0:002  Loading boot.efi8:932  0:009  load image status=Unsupported12:944  4:012  Image is not loaded, status=Unsupported

grazie

Edited May 3, 2015 by Ghera
Regolamento

Fabio1971 · April 22, 2015

Leggi il regolamento. Grazie

Fabio

Ghera · April 22, 2015

Chiedo scusa... speravo che qualcuno mi potesse aiutare....

grazie comunque

Gherardo

Fabio1971 · April 22, 2015

Se c'è qualche errore dovresti avviare in verbose mode, se si blocca posta una foto

Fabio

Ghera · April 22, 2015

Prima di tutto grazie per l'aiuto .... Purtroppo ho provato ad avviare in verbose mode ma il problema è che non si schioda dalla schermata GUI.... non carica la classica schermata di inizio caricamento osx e non compaiono le varie righe info di caricamento.

Ho notato che sul file debug.log nelle ultime righe c'è scritto:

Loading boot.efi

load image status=Unsupported

Image is not loaded, status=Unsupported

Gherardo

Fabio1971 · April 22, 2015

Per primo descrivi hardware se no non ho idea

Per avviare in verbose mode quando vedi il tema d Clover da tastiera schiaccia il tasto spaziatrice e con i tasti di direzione ti sposti su verbose

Fabio

Ghera · April 23, 2015

ciao Fabio,

ho fatto la prova che mi hai descritto... purtroppo rimane piantato sulla schermata GUI...

Come da te richiesto ecco alcune info sull'hardware, BIOS, ....

Hardware:

Scheda madre: Gigabyte Z87M-D3H

CPU: intel I5 4440

Ram: 16 GB 1600 MHz DDR3

Scheda Video: nvidia GTX 760 2GB

Configurazione con clover: Mac Pro 5.1

BIOS version F9

Set X.M.P. Memory Profile: Profile1

Set XHCI Mode: Auto

Set XHCI Hand-off: Enabled

Set EHCI Hand-off: Enabled

Set VT-d: Disabled

Set Intel Processor Graphics: Disabled

Set SATA Mode Selection: AHCI

Partizione EFI

config.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<dict>
				<key>CStates</key>
				<false/>
				<key>PStates</key>
				<false/>
			</dict>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>dart=0 kext-dev-mode=1</string>
		<key>CustomLogo</key>
		<string>Apple</string>
		<key>DefaultVolume</key>
		<string>Macintosh HD</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Log</key>
		<true/>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>20</integer>
		<key>XMPDetection</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>1</string>
		</dict>
		<key>FakeID</key>
		<dict>
			<key>ATI</key>
			<string>0x0</string>
			<key>IMEI</key>
			<string>0x0</string>
			<key>IntelGFX</key>
			<string>0x0</string>
			<key>LAN</key>
			<string>0x0</string>
			<key>NVidia</key>
			<string>0x0</string>
			<key>SATA</key>
			<string>0x0</string>
			<key>WIFI</key>
			<string>0x0</string>
			<key>XHCI</key>
			<string>0x0</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>FixOwnership</key>
			<false/>
			<key>Inject</key>
			<false/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>Nothing</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Hide</key>
		<array>
			<string>Windows</string>
			<string>\EFI\BOOT\BOOTX64.EFI</string>
		</array>
		<key>Language</key>
		<string>it:0</string>
		<key>Mouse</key>
		<dict>
			<key>Enabled</key>
			<true/>
			<key>Mirror</key>
			<false/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<false/>
			<key>Tool</key>
			<false/>
		</dict>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<false/>
			<key>NVidia</key>
			<false/>
		</dict>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>KernelPm</key>
		<true/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>External icons patch</string>
				<key>Find</key>
				<data>
				RXh0ZXJuYWw=
				</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				SW50ZXJuYWw=
				</data>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>MLB</key>
		<string>yyyyyyyyyyyyyy</string>
		<key>ROM</key>
		<string>xxxxxxxxxxxxx</string>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BiosReleaseDate</key>
		<string>10/07/10</string>
		<key>BiosVendor</key>
		<string>Apple Inc.</string>
		<key>BiosVersion</key>
		<string>MP51.88Z.007F.B03.1010071432</string>
		<key>Board-ID</key>
		<string>Mac-F221BEC8</string>
		<key>BoardManufacturer</key>
		<string>Apple Inc.</string>
		<key>BoardSerialNumber</key>
		<string>yyyyyyyyyyyyyyyy</string>
		<key>BoardType</key>
		<integer>11</integer>
		<key>ChassisAssetTag</key>
		<string>Pro-Enclosure</string>
		<key>ChassisManufacturer</key>
		<string>Apple Inc.</string>
		<key>ChassisType</key>
		<string>06</string>
		<key>Family</key>
		<string>Mac Pro</string>
		<key>Manufacturer</key>
		<string>Apple Inc.</string>
		<key>Mobile</key>
		<false/>
		<key>ProductName</key>
		<string>MacPro5,1</string>
		<key>SerialNumber</key>
		<string>xxxxxxxxxx</string>
		<key>SmUUID</key>
		<string>9E06BC16-3A0E-465C-BA14-3FFD74795845</string>
		<key>Trust</key>
		<false/>
		<key>Version</key>
		<string>1.0</string>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Detect</string>
		<key>InjectSystemID</key>
		<true/>
		<key>NoCaches</key>
		<false/>
	</dict>
</dict>
</plist>

grazie ancora

Gherardo

Fabio1971 · April 23, 2015

Il bootloader lo hai installato su usb oppure su HD in legasy ho uefi

Quali kext hai installato

Fabio

Ghera · April 23, 2015

ciao Fabio,

Il bootLoader è installato su HD in UEFI

nella cartella drivers64UEFI ci sono:

FSInject-64.efi

HFSPlus.efi

OsxAptioFixDrv-64.efi

OsxFatBinaryDrv-64.efi

nella cartella Kexts/10.9

FakeSMC.kext

RealtekRTL81xx.kext

Gherardo

Fabio1971 · April 23, 2015

Controlla da bios se hai HD primario

Aggiungi in EFI/Clover/drivers64uefi : emuvariableuefi-64

Fabio

Ghera · April 23, 2015

Ho installato emuvariableuefi-64...

ho controllato nel bios ed è dettato così:

nel menu Boot Option priority

HD è settato su Boot option #1

ho provato e purtroppo :no: continua a rimanere piantato su GUI....

Gherardo

Fabio1971 · April 23, 2015

Fai una prova installa Clover su una usb e priva a bootare

Fabio

Ghera · April 23, 2015

Ho installato in modalità UEFI clover su una usb...

Ho fatto dalla usb e purtroppo continua a rimanere bloccato sulla schermata GUI....

il debug.log della usb è il seguente

0:100  0:100  MemLog inited, TSC freq: 3099997770
0:100  0:000  
0:100  0:000  Now is 23.4.2015,  14:42:16 (GMT+2047)
0:100  0:000  Starting Clover rev 2999 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x5,0x0)\HD(1,GPT,F068994F-1B18-4998-BC45-48769EE48717,0x28,0x64000) @C0ABC698
0:100  0:000  SelfDirPath = \EFI\BOOT
0:101  0:000  Total Memory Slots Count = 4
0:101  0:000  Type 17 Index = 0
0:101  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:101  0:000  SmbiosTable.Type17->Size = 8192MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:101  0:000  Type 17 Index = 1
0:101  0:000  Ignoring insane frequency value 0MHz
0:101  0:000  SmbiosTable.Type17->Speed = 0MHz
0:101  0:000  SmbiosTable.Type17->Size = 0MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:101  0:000  Type 17 Index = 2
0:101  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:101  0:000  SmbiosTable.Type17->Size = 8192MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:101  0:000  Type 17 Index = 3
0:101  0:000  Ignoring insane frequency value 0MHz
0:101  0:000  SmbiosTable.Type17->Speed = 0MHz
0:101  0:000  SmbiosTable.Type17->Size = 0MB
0:101  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:101  0:000  Boot status=0
0:101  0:000  Clover revision: 2999  running on Z87M-D3H
0:101  0:000  ... with board Z87M-D3H
0:101  0:000  Clover load options size = 4 bytes
0:101  0:000  Found Plist String = , parse XML in LoadOptions
0:101  0:000  Xml in load options is bad
0:107  0:006  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:108  0:000  EFI\CLOVER\config.plist loaded: Success
0:112  0:004  Found theme BOOTCAMP
0:116  0:004  Found theme christmas
0:120  0:004  Found theme NEWYEAR
0:124  0:004  Loading early settings
0:124  0:000  timeout set to 10
0:124  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:273  0:149  KextsToPatch: 1 requested
0:280  0:006  KextToPatch 0: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:312  0:032  Default theme: 
0:319  0:006  Hiding entries with string Windows
0:326  0:006  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:332  0:006  LoadDrivers() start
0:343  0:010  Loading EmuVariableUefi-64.efi
0:358  0:015  load image status=Success
0:365  0:006  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:423  0:057  Loading FSInject-64.efi
0:446  0:022  load image status=Success
0:452  0:006  Loading OsxAptioFixDrv-64.efi
0:468  0:015  load image status=Success
0:474  0:006  Loading OsxFatBinaryDrv-64.efi
0:485  0:011  load image status=Success
0:492  0:006  Loading PartitionDxe-64.efi
0:507  0:015  load image status=Success
0:514  0:006   - driver needs connecting
0:520  0:006  Loading HFSPlus.efi
0:535  0:014  load image status=Success
0:542  0:006   - driver needs connecting
0:548  0:006  2 drivers needs connecting ...
0:554  0:006  PlatformDriverOverrideProtocol->GetDriver overriden
0:566  0:011  Partition driver loaded: 
0:579  0:012  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:813  0:234  LoadDrivers() end
0:820  0:006  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
0:865  0:045  SetMaxResolution: found best mode 4: 1920x1080
1:200  0:334  Video mode change to mode #4: Success
1:212  0:011   - set
1:219  0:006  Console modes reported: 4, available modes:
1:225  0:006    Mode 1: 80x25 (current mode)
1:231  0:006    Mode 2: 80x50
1:238  0:006    Mode 3: 100x31
1:244  0:006    Mode 4: 128x30
1:250  0:006  SetScreenResolution: 1920x1080 - already set
1:263  0:012  reinit: self device path=PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x5,0x0)\HD(1,GPT,F068994F-1B18-4998-BC45-48769EE48717,0x28,0x64000)
1:271  0:007  CPU Vendor = 756E6547 Model=306C3
1:277  0:006  The CPU supported turbo
1:289  0:011  BrandString = Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz
1:295  0:006  MSR 0xE2 before patch 1E000402
1:301  0:006  MSR 0xE4              00001814
1:308  0:006  MSR 0xCE              00080838_F3011F00
1:314  0:006  non-usable FLEX_RATIO = 10000
1:321  0:006  corrected FLEX_RATIO = 0
1:327  0:006  FSBFrequency=100MHz DMIvalue=100000kHz
1:333  0:006  Corrected FSBFrequency=100MHz
1:340  0:006  Vendor/Model/Stepping: 0x756E6547/0x3C/0x3
1:346  0:006  Family/ExtFamily: 0x6/0x0
1:358  0:011  MaxDiv/MinDiv: 31.0/8
1:364  0:006  Turbo: 33/33/33/33
1:371  0:006  Features: 0xBFEBFBFF
1:377  0:006  Threads: 4
1:383  0:006  Cores: 4
1:390  0:006  FSB: 100 MHz
1:396  0:006  CPU: 3100 MHz
1:403  0:006  TSC: 3100 MHz
1:409  0:006  PIS: 400 MHz
1:415  0:006  PCI (00|00:00.00) : 8086 0C00 class=060000
1:422  0:006  PCI (00|00:01.00) : 8086 0C01 class=060400
1:428  0:006  PCI (00|01:00.00) : 10DE 1187 class=030000
1:434  0:006  Found NVidia model=EVGA GeForce GTX 760
1:446  0:011  PCI (00|01:00.01) : 10DE 0E0A class=040300
1:453  0:006  PCI (00|00:14.00) : 8086 8C31 class=0C0330
1:459  0:006  PCI (00|00:16.00) : 8086 8C3A class=078000
1:465  0:006  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
1:472  0:006  PCI (00|00:1A.00) : 8086 8C2D class=0C0320
1:478  0:006  PCI (00|00:1B.00) : 8086 8C20 class=040300
1:484  0:006  PCI (00|00:1C.00) : 8086 8C10 class=060400
1:491  0:006  PCI (00|00:1C.02) : 8086 8C14 class=060400
1:497  0:006  PCI (00|03:00.00) : 10EC 8168 class=020000
1:509  0:011  PCI (00|00:1C.03) : 8086 244E class=060401
1:515  0:006  PCI (00|04:00.00) : 8086 244E class=060401
1:522  0:006  PCI (00|00:1C.04) : 8086 8C18 class=060400
1:528  0:006  PCI (00|06:00.00) : 168C 0030 class=028000
1:535  0:006  PCI (00|00:1D.00) : 8086 8C26 class=0C0320
1:541  0:006  PCI (00|00:1F.00) : 8086 8C44 class=060100
1:547  0:006  PCI (00|00:1F.02) : 8086 8C02 class=010601
1:554  0:006  PCI (00|00:1F.03) : 8086 8C22 class=0C0500
1:560  0:006  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
1:572  0:011  ScanSPD() start
1:579  0:006  SMBus CmdReg: 0x1
1:585  0:006  Scanning SMBus [8086:8C22], mmio: 0xF3315004, ioport: 0xF000, hostc: 0x1
1:606  0:020  SPD[0]: Type 11 @0x50 
1:620  0:014  Found module with XMP version 1.3DDR speed 1600MHz 
1:633  0:012  Slot: 0 Type 24 8192MB 1600MHz Vendor=Corsair PartNo=CMZ16GX3M2A1600C10 SerialNo=0000000000000000 
1:660  0:026  SPD[2]: Type 11 @0x52 
1:675  0:014  Found module with XMP version 1.3DDR speed 1600MHz 
1:688  0:012  Slot: 2 Type 24 8192MB 1600MHz Vendor=Corsair PartNo=CMZ16GX3M2A1600C10 SerialNo=0000000000000000 
1:826  0:138  ScanSPD() end
1:832  0:006  Get Acpi Tables List from RSDT:
1:845  0:012   Found table: FACP  A M I len=132
1:851  0:006   Found table: APIC  A M I len=114
1:858  0:006   Found table: FPDT  A M I len=68
1:864  0:006   Found table: SSDT  Cpu0Ist len=1337
1:870  0:006   Found table: SSDT  CpuPm len=2776
1:877  0:006   Found table: MCFG   len=60
1:883  0:006   Found table: HPET  A M I len=56
1:895  0:011   Found table: SSDT  SataTabl len=877
1:901  0:006   Found table: SSDT  SaSsdt  len=12953
1:908  0:006  Calibrated TSC frequency =3099997770 =3099MHz
1:914  0:006  Loading main settings
1:920  0:006  Config set Fixes will override FixMask mask!
1:927  0:006     final mask=00000000
1:933  0:006  ** Warning: ignoring RtVariable MountEFI set in config.plist: deprecated !
1:940  0:006  ** Warning: ignoring RtVariable LogLineCount set in config.plist: deprecated !
1:946  0:006  ** Warning: ignoring RtVariable LogEveryBoot set in config.plist: deprecated !
1:958  0:011  found 13 volumes with blockIO
1:964  0:006   0. Volume:
1:971  0:006    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x5,0x0)
2:004  0:033    Result of bootcode detection: bootable unknown (legacy)
2:011  0:006    USB volume
2:017  0:006    USB volume
2:023  0:006   1. Volume:
2:030  0:006    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x5,0x0)\HD(1,GPT,F068994F-1B18-4998-BC45-48769EE48717,0x28,0x64000)
2:038  0:007    Result of bootcode detection: bootable unknown (legacy)
2:050  0:011    USB volume
2:056  0:006    USB volume
2:063  0:007    This is SelfVolume !!
2:070  0:006   2. Volume:
2:076  0:006    PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x5,0x0)\HD(2,GPT,28148EFD-C979-40F6-859C-916FEDA84710,0x64028,0xE44BB0)
2:084  0:007    Result of bootcode detection: bootable unknown (legacy)
2:090  0:006    USB volume
2:097  0:006    USB volume
2:103  0:006   3. Volume:
2:109  0:006    PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x6,0x0)
2:155  0:045    USB volume
2:162  0:006    USB volume
2:168  0:006   4. Volume:
2:174  0:006    PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x6,0x0)\HD(1,GPT,E6263A99-8811-41D8-AB4B-55470A14FC89,0x28,0x64000)
2:182  0:007    Result of bootcode detection: bootable unknown (legacy)
2:188  0:006    USB volume
2:195  0:006    USB volume
2:326  0:131   5. Volume:
2:332  0:006    PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x6,0x0)\HD(2,GPT,1DCF36C2-310C-4527-8CD9-74FC540D3940,0x64028,0x3A2D1FB0)
2:351  0:018    USB volume
2:357  0:006    USB volume
2:363  0:006   6. Volume:
2:370  0:006    PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x6,0x0)\Scsi(0x0,0x1)
2:376  0:006    USB volume
2:382  0:006    USB volume
2:389  0:006   7. Volume:
2:395  0:006    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
2:406  0:011    Result of bootcode detection: bootable unknown (legacy)
2:413  0:006   8. Volume:
2:419  0:006    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
2:426  0:006   9. Volume:
2:438  0:011    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,B40D4D3F-75B4-43BC-90CA-0D3E0B7151C2,0x28,0x64000)
2:445  0:007    Result of bootcode detection: bootable unknown (legacy)
2:460  0:014  10. Volume:
2:466  0:006    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,CD35DBC1-23D5-43C7-8330-7CF7EAC12CED,0x64028,0xDEF0B60)
2:473  0:007    Result of bootcode detection: bootable unknown (legacy)
2:479  0:006  11. Volume:
2:486  0:006    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,5E007DE6-3746-4309-B97D-E2C570124BE3,0x28,0x64000)
2:498  0:012    Result of bootcode detection: bootable unknown (legacy)
2:520  0:021  12. Volume:
2:526  0:006    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,EE55C490-265D-4EC2-85B5-9A283194AB07,0x64028,0x74662D60)
2:533  0:006  PutNvramPlistToRtVars: nvram.plist not found
2:539  0:006  GlobalConfig: theme.plist not found, get random theme christmas
2:547  0:007  Using theme 'christmas' (EFI\CLOVER\themes\christmas)
2:559  0:011  OS main and drive as badge
2:576  0:017  font WoR_NovaMono_9W_A.png loaded from themedir
2:583  0:006  Choosing theme christmas
2:589  0:006  Custom legacy start
2:596  0:006  Custom legacy end
2:602  0:006  Scanning legacy ...
2:608  0:006   0: 'Whole Disc Boot' (legacy) not legacy
2:621  0:012   1: 'EFI' (legacy) not legacy
2:634  0:012   2: 'USB' (legacy) not legacy
2:647  0:012   3: 'Whole Disc Boot' (legacy) not legacy
2:659  0:012   4: 'EFI' (legacy) not legacy
2:672  0:012   5: 'My HD 01' (legacy) not legacy
2:690  0:018   6: 'Whole Disc Boot' (legacy) not legacy
2:703  0:012   7: 'Whole Disc Boot' (legacy) not legacy
2:716  0:012   8: 'Whole Disc Boot' (legacy) not legacy
2:729  0:012   9: 'EFI' (legacy) not legacy
2:741  0:012  10: 'Macintosh HD' (legacy) not legacy
2:754  0:012  11: 'EFI' (legacy) not legacy
2:767  0:012  12: 'Macintosh HD 2' (legacy) not legacy
2:780  0:012  Custom entries start
2:786  0:006  Custom entries finish
2:792  0:006  Scanning loaders...
2:804  0:011   0: 'Whole Disc Boot' no file system
2:817  0:012   1: 'EFI'
2:885  0:068      AddLoaderEntry for Volume Name=EFI
2:892  0:006     hiding entry: \EFI\BOOT\BOOTX64.efi
2:898  0:006   2: 'USB'
2:959  0:060   3: 'Whole Disc Boot' no file system
2:972  0:012   4: 'EFI'
3:032  0:060   5: 'My HD 01'
3:093  0:061   6: 'Whole Disc Boot' no file system
3:106  0:012   7: 'Whole Disc Boot' no file system
3:119  0:012   8: 'Whole Disc Boot' no file system
3:132  0:012   9: 'EFI'
3:202  0:070      AddLoaderEntry for Volume Name=EFI
3:209  0:006     hiding entry: \EFI\BOOT\BOOTX64.efi
3:215  0:006  10: 'Macintosh HD'
3:229  0:014      AddLoaderEntry for Volume Name=Macintosh HD
3:239  0:009      Check if volume Is Hibernated:
3:245  0:006      Check sleep image 'by signature':
3:256  0:010      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:284  0:027      SleepImage name from pref: ImageVolume = 'Macintosh HD', ImageName = '\private\var\vm\sleepimage'
3:298  0:014      sleepimage not found -> Not Found
3:304  0:006       hibernated: no - sign
3:424  0:119      AddLoaderEntry for Volume Name=Macintosh HD
3:430  0:006     hiding entry: \EFI\BOOT\BOOTX64.efi
3:436  0:006  11: 'EFI'
3:497  0:060  12: 'Macintosh HD 2'
3:558  0:061  Custom tool start
3:565  0:006  Custom tool end
3:575  0:010  found tool \EFI\CLOVER\tools\Shell64U.efi
3:581  0:006  Checking EFI partition Volume 1 for Clover
3:587  0:006   Found Clover
3:601  0:013  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
3:620  0:019  Checking EFI partition Volume 4 for Clover
3:627  0:006  Checking EFI partition Volume 9 for Clover
3:635  0:008   Found Clover
3:641  0:006  EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored
3:661  0:019  Checking EFI partition Volume 11 for Clover
3:674  0:013  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
3:725  0:051  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
3:738  0:012  EfiBootVolume not found
3:744  0:006  Default boot entry not found
3:751  0:006  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
3:770  0:019  DefaultIndex=-1 and MainMenu.EntryCount=8
3:776  0:006  Use anime=Anim_1_Logo frames=26
6:821  3:044  Found Mouse device:
6:830  0:008  GUI ready
15:965  9:135  Boot option Boot0000 not found
15:971  0:006  StartLoader() start
15:978  0:006  Finally: Bus=99999kHz CPU=3099MHz
15:984  0:006  Kernel and Kext Patches:
15:990  0:006  	Allowed: y
15:997  0:006  	Debug: n
16:003  0:006  	KernelCpu: n
16:009  0:006  	Lapic: n
16:016  0:006  	AICPUPM: y
16:022  0:006  	AppleRTC: y
16:029  0:006  	KernelPm: y
16:035  0:006  	FakeCPUID: 0x0
16:041  0:006  	ATIController: <null string>
16:048  0:006  	ATIDataLength: 0
16:054  0:006  	0 Kexts to load
16:066  0:011  	1 Kexts to patch
16:072  0:006  	  KextPatch[0]: 8 bytes, AppleAHCIPort
16:079  0:006  Loading boot.efi
16:097  0:018  load image status=Unsupported
31:221  15:123  Image is not loaded, status=Unsupported

mi sembra molto simile a quello nel HD

Gherardo

Fabio1971 · April 23, 2015

Controlla nel bios dischi in ahci e disabilita vt-d

Fabio

Ghera · April 23, 2015

così è settato il bios

BIOS version F9

Set X.M.P. Memory Profile: Profile1

Set XHCI Mode: Auto

Set XHCI Hand-off: Enabled

Set EHCI Hand-off: Enabled

Set VT-d: Disabled

Set Intel Processor Graphics: Disabled

Set SATA Mode Selection: AHCI

La cosa che non capisco è che prima dell'aggiornamento andava alla grande.... io il bios l'ho configurato la prima volta e poi non l'avevo più toccato, così vale anche per il config.plist di clover.... :blink: .... io ho seguito un video tutorial su youtube per la migrazione a clover e, se vuoi, ti passo il link per capire quale errore io sto facendo...

Gherardo

Fabio1971 · April 23, 2015

Va bene

Il fatto strano è che da usb dovrebbe bypassare HD e bootare

Fabio

Ghera · April 23, 2015

Il link cancellato

Gherardo

Ghera · April 24, 2015

Ciao Fabio... Penso di aver fatto una cazz... a postare il video... Nel video ci sono riferimenti ad un famigerato sito...

Ci ho pensato solo stamattina....

Gherardo

Fabio1971 · April 24, 2015

Il link cancellato

Gherardo

Meglio cosí

Hai fatto altre prove per caso

Fabio

Ghera · April 24, 2015

Sinceramente non so più cosa fare... purtroppo non avendo dei riscontri attraverso la modalità verbose non capisco il motivo per cui il boot rimane sulla schermata del menu di clover.

L'unica info che ho è quella nel debug.log di clover in cui è scritto:

Loading boot.efi
load image status=Unsupported
Image is not loaded, status=Unsupported

io ho cercato su internet, inserendo le ultime righe del debug.log, ma non ho trovato niente...

Ma una volta che ho selezionato l'hd in cui e installato osx quale file viene inizialmente caricato? è boot.efi?

Gherardo

Fabio1971 · April 24, 2015

Posta la cartella EFI della usb che dò un'occhiata

Fabio

Ghera · April 24, 2015

ciao fabio,

ti ho postato il file efi della usb

Gherardo

scusa.... errore... ora dovrei aver postato la cartelle efi della USB

Gherardo

EFI.zip

Fabio1971 · April 24, 2015

Da provare

Fabio

EFI.zip

Ghera · April 24, 2015

grazie fabio,

lo copio nella usb?

Ghera · April 25, 2015

ciao Fabio, testato su usb l'efi da te postato.... sempre uguale.... :no:

Gherardo

[Risolto] Problema caricamento mavericks 10.9.5 con clover

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites