iAstroboyid Posted March 10, 2015 Share Posted March 10, 2015 this is my 1st laptop that i have tried to install osx86 thanks to mayankchopra, jamiethemorris his config.plist and reading his post helped me complete the installation , chriss1111 helped long time ago with clover basics. I have Asus s400ca with i5 intel HD 4000. Working: with 10.10.2 Sound with VoodooHDA VT1708S kexts 1st install need to go to voodooHDA pref turn on the volume. Keyboard with all Fn enablle , screen brightness + -, volume + - ,mute,pause ,insert num lk, display off. Trackpad Display Ethernet Bluetooth Battery, temp sensors internal WIFI does not work, replace it with Broadcom BCM94322HM8L WIFI Wireless Card you can buy them at eBay from $7 native no kext needed. touch screen works perfect, usb 3 works with usb 2 only. tried my HD with usb3 no dice. sleep works , sound will stop after long sleep , reboot restore sound. intel HD 4000 with full qe/ci HDMI with video,no sound still working on it. Camara, mic only works with FaceTime and voice call. iMessage Not Working: Sound with HDMI not tested SD card bluetooth. instillation add config.plist and patched DSDT , all the kexts on the clover v2k r3128 EFI boot loader kexts folder to my EFI usb, to boot from internal SSD created dos partition add add clover EFI and folder Microsoft with bootmgfw.efi. not taking credit, took me hours of reading , finding correct kexts and patch. Feel free to try them. serial number is not included on the config.plist updated: public beta OS X 10.10.3 (14D113c) working with full qe/ci first stage patch replaced patch 4188c4eb11 to 4188c4eb31 sleep works again fully functional . don't use 85C0745D48 to 31C0745B48 worked with 10.10.2 not with 10.10.3 , correct stage patch is 4188c4eb11 to 4188c4eb31 updated my config.plist with correct stage patch asus400cakexts.zip Link to comment Share on other sites More sharing options...
legot28 Posted March 10, 2015 Share Posted March 10, 2015 hello i am working on a asus n76vb can you instal clover on your hdd , not mine only in usb does your asus detect hdd with GUI partition , not mine only MBR i use chameleon on hdd and all work fine sound , sleep , hdmi etc etc the only probleme is the two key f5 and f6 to control the brightness other keys are ok can you give me some details to boot clover with internal HDD THANK edit i am now capable to boot with clover i am working on thank Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 10, 2015 Share Posted March 10, 2015 For brightness control, first patch your DSDT/SSDT to get enabled brightness control slider under "Sys Pref ==> Display" Once it is enabled, then you have to make changes in your DSDT/SSDT as per the brightness keys are generating PS2 code/EC Queries. Link to comment Share on other sites More sharing options...
legot28 Posted March 10, 2015 Share Posted March 10, 2015 hello my DSDT is already patched (pnlf) and i use acpibacklight.kext and brightness control slider is present under "Sys Pref ==> Display" and operationel with mouse but not with keyboard can you tell me more about patching PS2 code/EC Queries in dsdt i post you the DSDTi use with clover thank you DSDT N76VB.zip Link to comment Share on other sites More sharing options...
scorekaj22 Posted March 10, 2015 Share Posted March 10, 2015 Hey iAstroboyid I couldnt get my hands on the 10.10.2 AppleHD4000Graphics.kext but it was what broke the reboot! Now it's starting normal but graphics are not working. Can you please post 10.10.2 AppleHD4000Graphics.kext? Thanks Link to comment Share on other sites More sharing options...
iAstroboyid Posted March 11, 2015 Author Share Posted March 11, 2015 Hey iAstroboyid I couldnt get my hands on the 10.10.2 AppleHD4000Graphics.kext but it was what broke the reboot! Now it's starting normal but graphics are not working. Can you please post 10.10.2 AppleHD4000Graphics.kext? Thanks sorry i was working AppleIntelHD4000Graphics.kext.10.10.2.zip Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 11, 2015 Share Posted March 11, 2015 hello my DSDT is already patched (pnlf) and i use acpibacklight.kext and brightness control slider is present under "Sys Pref ==> Display" and operationel with mouse but not with keyboard can you tell me more about patching PS2 code/EC Queries in dsdt i post you the DSDTi use with clover thank you DSDT N76VB.zip For the key mapping first we have to identify whether your brightness keys are generating PS2 codes or ACPI events. For that just install the linked PS2Controller : https://bitbucket.org/RehabMan/os-x-voodoo-ps2-controller/downloads Also download and copy the ioio binary to /usr/bin : https://github.com/RehabMan/OS-X-ioio Once it is done reboot the OS X to take effect of newly installed PS2 Controller kext. Then open the terminal, enter the command "ioio -s ApplePS2Keyboard LogScanCodes 1" Once the above done, open the console and select system.log Check the system.log while pressing your brightness keys. If you are getting message with PS2 codes then you have PS2 codes for brightness control If it is not generating PS2 code then update here, i will share the method to check ACPI Events. Link to comment Share on other sites More sharing options...
Codinger Posted March 11, 2015 Share Posted March 11, 2015 Or you can map brightness to f9 + f10 keys with system settings Link to comment Share on other sites More sharing options...
legot28 Posted March 11, 2015 Share Posted March 11, 2015 hello i can't use voodoo.kext i use ApplePS2SmartTouchPad.kext i can't see any ps2 code in console i post screen of my test keyboard.zip thank for your help Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 11, 2015 Share Posted March 11, 2015 After running the command ioio -s ApplePS2Keyboard LogScanCodes 1 , Press any keys and check whether the PS2 codes are appearing or not. Because i had tested this with the linked PS2Controller kext only. Link to comment Share on other sites More sharing options...
legot28 Posted March 11, 2015 Share Posted March 11, 2015 hello the linked ps2controller kext (voodoo) do not work for me because i have elan touchpad and only ApplePS2SmartTouchPad.kext work for my system i have search on google and i think that brightness keys are generating with ACPI events thank edit i resume when i use the F5 F6 , the brightness control slider don't move and brightness don't change but if i reboot , the brightness have change and the control slider too after sleep and wake , there is no change strange no !!!!! Link to comment Share on other sites More sharing options...
artur_pt Posted March 11, 2015 Share Posted March 11, 2015 hello legot28 can u upload ur ioreg ... can send by pm i don't see any fn keys patch in ur dsdt .. good hack Link to comment Share on other sites More sharing options...
legot28 Posted March 12, 2015 Share Posted March 12, 2015 hello @arthu-pt thank for your help i have found a solution in OSXLatitude Forum Must Needed patches: Brightness Fn keys patch:Modify the method _Q0E and _Q0F in DSDT for the ATKP conditional clause code: Method (_Q0E, 0, NotSerialized) { If (ATKP) { \_SB.ATKD.IANE (0x20) } } Method (_Q0F, 0, NotSerialized) { If (ATKP) { \_SB.ATKD.IANE (0x10) } } and now, all is working fine complete hackintosh 10.10.3 (14D87h) Link to comment Share on other sites More sharing options...
scorekaj22 Posted March 12, 2015 Share Posted March 12, 2015 Hey iAstroboyid I have had my QE/CI working on 10.10.2 but now it's not working. I did as you did installing 10.10.2 but the only thing that happend was that i was enabled to boot normally and not just in safe boot mode. Did you just install the 10.10.2 apple intel hd 4000 kext? or what did you do? Thanks Link to comment Share on other sites More sharing options...
iAstroboyid Posted March 12, 2015 Author Share Posted March 12, 2015 Scorekaj22 Do you hace asus s400ca? Try yo use My config.plist , my DSDT is patched Link to comment Share on other sites More sharing options...
Codinger Posted March 12, 2015 Share Posted March 12, 2015 You could try clover bootloader. And if your bios is uefi than you HAVE to install it to efi Link to comment Share on other sites More sharing options...
scorekaj22 Posted March 12, 2015 Share Posted March 12, 2015 Maybe i'm off topic but my laptop is similar so i just guessed that there might be some help to get from you guys. I am running the newest version of Clover and have the HD4000 and i have had it working all the way until 10.10.3 so i have no clue what changed. Clover just did some magic Link to comment Share on other sites More sharing options...
iAstroboyid Posted March 12, 2015 Author Share Posted March 12, 2015 10.10.3 is not stable, still working to solve it. My Asus a400ca has PCIe 24gb ssd with 10.10.3 , main ssd drive has 10.10.2 Link to comment Share on other sites More sharing options...
scorekaj22 Posted March 16, 2015 Share Posted March 16, 2015 If you get to a solution then please write me a message... I have been tampering a bit around seeing if i could get the 10.10.3 working. But just did the stupid thing of overwriting it so i lost the 10.10.3 version, so if you still have the original it would be nice if you could upload it Oups Link to comment Share on other sites More sharing options...
iAstroboyid Posted March 25, 2015 Author Share Posted March 25, 2015 If you get to a solution then please write me a message... I have been tampering a bit around seeing if i could get the 10.10.3 working. But just did the stupid thing of overwriting it so i lost the 10.10.3 version, so if you still have the original it would be nice if you could upload it Oups I was so exited to tell you the solution , seem you already found it. We are ready for 10.10.3 I did not remove first stage patch, used to have different one, replaced patch 4188c4eb11 to 4188c4eb31 this work most current beta too, sleep works too =) , OS X 10.10.3 (14D113c) 1 Link to comment Share on other sites More sharing options...
ArturXXX Posted May 6, 2015 Share Posted May 6, 2015 Hi Guys. This driver will solve the problem with the camera. http://www.insanelymac.com/forum/files/file/407-asus-s400c-cam-fix/ Tested on: ASUS S400CA i5 & i7 - kext is fixed example: AnyiSightCam.kext (info.plist) CFBundleDevelopmentRegion English CFBundleIdentifier com.AnV_Software.driver.AnyiSightCam CFBundleInfoDictionaryVersion 6.0 CFBundleName AnyiSightCam CFBundlePackageType KEXT CFBundleSignature ???? CFBundleVersion 8.8.8 IOKitPersonalities Fake Built-in iSight Device CFBundleIdentifier com.apple.driver.AppleUSBMergeNub IOClass AppleUSBMergeNub IOProviderClass IOUSBDevice IOProviderMergeProperties kSuspendPort bcdDevice 1077 USB Product Name Built-in iSight USB Vendor Name Apple Inc. USB Serial Number 8JA1K2FC3DCLDA00 non-removable yes idProduct 8507 idVendor 1452 iManufacturer 1 iProduct 2 iSerialNumber 3 idProduct 41276 idVendor 1266 Fake Built-in iSight Interface A CFBundleIdentifier com.apple.driver.AppleUSBMergeNub IOClass AppleUSBMergeNub IOProviderClass IOUSBInterface IOProviderMergeProperties USB Interface Name Built-in iSight bcdDevice 1077 idProduct 34055 idVendor 1452 bConfigurationValue * bInterfaceNumber 0 idProduct 41276 idVendor 1266 Fake Built-in iSight Interface B CFBundleIdentifier com.apple.driver.AppleUSBMergeNub IOClass AppleUSBMergeNub IOProviderClass IOUSBInterface IOProviderMergeProperties bcdDevice 1077 idProduct 34055 idVendor 1452 bConfigurationValue * bInterfaceNumber 1 idProduct 41276 idVendor 1266 OSBundleRequired Root Link to comment Share on other sites More sharing options...
lvg Posted May 16, 2015 Share Posted May 16, 2015 this is my 1st laptop that i have tried to install osx86 thanks to mayankchopra, jamiethemorris his config.plist and reading his post helped me complete the installation , chriss1111 helped long time ago with clover basics. I have Asus s400ca with i5 intel HD 4000. Working: with 10.10.2 Sound with VoodooHDA VT1708S kexts 1st install need to go to voodooHDA pref turn on the volume. Keyboard with all Fn enablle , screen brightness + -, volume + - ,mute,pause ,insert num lk, display off. Trackpad Display Ethernet Bluetooth Battery, temp sensors internal WIFI does not work, replace it with Broadcom BCM94322HM8L WIFI Wireless Card you can buy them at eBay from $7 native no kext needed. touch screen works perfect, usb 3 works with usb 2 only. tried my HD with usb3 no dice. sleep works , sound will stop after long sleep , reboot restore sound. intel HD 4000 with full qe/ci HDMI with video,no sound still working on it. Camara, mic only works with FaceTime and voice call. iMessage Not Working: Sound with HDMI not tested SD card bluetooth. instillation add config.plist and patched DSDT , all the kexts on the clover v2k r3128 EFI boot loader kexts folder to my EFI usb, to boot from internal SSD created dos partition add add clover EFI and folder Microsoft with bootmgfw.efi. not taking credit, took me hours of reading , finding correct kexts and patch. Feel free to try them. serial number is not included on the config.plist updated: public beta OS X 10.10.3 (14D113c) working with full qe/ci first stage patch replaced patch 4188c4eb11 to 4188c4eb31 sleep works again fully functional . don't use 85C0745D48 to 31C0745B48 worked with 10.10.2 not with 10.10.3 , correct stage patch is 4188c4eb11 to 4188c4eb31 updated my config.plist with correct stage patch Can you please post how did you go about installation. I also have Asus S400CA with Mavericks dual boot with pre-2k Clover. Even I am not successful with upgrading clover. I tried upgrading to Yosemite. Installation hangs. Link to comment Share on other sites More sharing options...
ArturXXX Posted May 17, 2015 Share Posted May 17, 2015 How to run USB 3: USB3.0 KEXT (0701) - S/L/E https://code.google.com/p/os-x-generic-usb3/downloads/list - Go to BIOS- Go to Boot- Disable Fast Boot (Don't disable this when installing Windows 8)- Enable Launch CSM - if this cause any issue -> Disable this too.- Turn off XHCI mode in BIOS! Advanced > USB Configuration > XHCI Pre-Boot Mode [Disabled] - This needs to be set to "Auto" for USB3.0 to work. So set it to "Auto". The sound operate normally after sleep if you use this kext: http://sourceforge.net/projects/voodoohda/files/VoodooHDA-v284.zip/download Not working: Sound with HDMI SD card works perfect bluetooth working with this card: Broadcom BCM494352 Link to comment Share on other sites More sharing options...
ArturXXX Posted July 1, 2015 Share Posted July 1, 2015 updated: OS X 10.10.4 (14E46) - everything is working properly. Link to comment Share on other sites More sharing options...
Recommended Posts