james341 Posted March 2, 2015 Share Posted March 2, 2015 Hello Just found out that apple released the 10.10.3 public beta and I would like to ask if it's possible to update to this beta on my computer ? Is it straight forward update or I need to reinstall the Yosemite from the start to make it work? Thanks Link to comment Share on other sites More sharing options...
redneck Posted March 2, 2015 Share Posted March 2, 2015 I just updated >normal .no problems Link to comment Share on other sites More sharing options...
james341 Posted March 2, 2015 Author Share Posted March 2, 2015 Ok tried to do it but after installation and restart I get to the apple logo and the filling bar and the pc boots it self over and over... I have the gigabyte GA-H87M- HD3 motherboard and everything worked great before the update (Clover way) Link to comment Share on other sites More sharing options...
james341 Posted March 3, 2015 Author Share Posted March 3, 2015 Is there a way to fix it? Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 3, 2015 Share Posted March 3, 2015 Boot with flag -v and check where it stuck in the booting process. Link to comment Share on other sites More sharing options...
VirusX Posted March 3, 2015 Share Posted March 3, 2015 10.10.3 apparently broke a lot of hackintoshes - be careful Link to comment Share on other sites More sharing options...
james341 Posted March 3, 2015 Author Share Posted March 3, 2015 I'm booting with -v flag and this is what I get before the system restart : Just tried to boot in safe mood option and the system load up.....this is strange ...I'm afraid to turn the pc off.... Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 3, 2015 Share Posted March 3, 2015 I'm booting with -v flag and this is what I get before the system restart : Just tried to boot in safe mood option and the system load up.....this is strange ...I'm afraid to turn the pc off.... Which graphics card you are using? and which is your boot loader? Link to comment Share on other sites More sharing options...
james341 Posted March 3, 2015 Author Share Posted March 3, 2015 Clover and the on board graphic card on my -gigabyte H87M-HD3 .... Link to comment Share on other sites More sharing options...
jpenguin Posted March 4, 2015 Share Posted March 4, 2015 Update this morning, working fine; hate the dumbed down 'photos' app Link to comment Share on other sites More sharing options...
james341 Posted March 4, 2015 Author Share Posted March 4, 2015 Great ....but in my situation and hardware it seems a problem , still I can boot with safe mode only Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 4, 2015 Share Posted March 4, 2015 While booting in safe mode it will disable all the graphics drivers. Also try a normal boot without caches. Link to comment Share on other sites More sharing options...
james341 Posted March 4, 2015 Author Share Posted March 4, 2015 No , still getting the system reboot , here is the screen shout ....I hope you can help figure this out ... Link to comment Share on other sites More sharing options...
artur_pt Posted March 4, 2015 Share Posted March 4, 2015 hello have u any patched applehda ? seems it stuck there good hack Link to comment Share on other sites More sharing options...
james341 Posted March 5, 2015 Author Share Posted March 5, 2015 Do you mean I need a patched applehda? I don't really know what is that so I think I don't. What do I need to do? Thanks Ok you mean high definition audio kext - I don't think I've installed this kext Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 5, 2015 Share Posted March 5, 2015 Boot with -x then copy the AppleHDA.kext to your Desktop then delete the kext from /System/Library/Extensions. Then boot with -v. Post result. Link to comment Share on other sites More sharing options...
james341 Posted March 5, 2015 Author Share Posted March 5, 2015 First of all I want to tell you tanks a lot Jithin Chandran for all your help in any post I've made. I think I messed up all my installation and I will start from the beginning. I actually wanted to deleted my fusion drive I've made prior to my current installation beacuse I prefer to have the osx installed only on a single SSD. Again Thabks for all your help and if I will have problems in my new installation I will post new thread and u hope you can continue helping me Maybe you just have an advise on my new installation? I will do it with clover I think But first I need to figure out how do I delete the fusion drive without my osx.... Can I use the clover USB do get into terminal and do it? Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 5, 2015 Share Posted March 5, 2015 CLOVER will be a good choice for UEFI/Legacy BIOS systems. It will be good if you are updating your hardware details in your Signature because without knowing your hardware details no one can suggest any solutions for issues. Fusion drive you can delete through Installer Terminal. (Deleting the Fusion drive will cause all data associated with the drive, including any Recovery HD partition that may be hidden, to be lost. Be sure to back up your data before proceeding.) 1. Note the Logical Volume Group UUID & Logical Volume UUID with the command diskutil cs list 2. Run the command diskutil cs deleteVolume <Logical Volume UUID> 3. Run the command diskutil cs delete <Logical Volume Group UUID> Link to comment Share on other sites More sharing options...
james341 Posted March 5, 2015 Author Share Posted March 5, 2015 Ok I'm happy to tell that I've installed from the start Yosemite on my SSD and also updated to 10.10.3 and everything is working great!!!! Now I will go into the second phase and will try to install windows 10 preview on my other SSD. I have couple of questions if it's ok : 1. First I will make the windows 10 install disk. I've downloaded the ISO image from Microsoft website and I will burn it on a DVD using the Disk Utility tool. Will this will work fine and boot? 2. As I understand I need to disconnect the SSD with the OS X and only leave the new SSD I want to install on it the windows 10. 3. Also is there anything I need to do after the install complete? After I will connect the both SSD will the Clover boot will show and will let me choose what OS I want? Is it out of the box? 4. I will update my hardware on my signature but I will also mention that I have intel i5 with gigabyte GA-m87h-hd3 Many thanks Link to comment Share on other sites More sharing options...
iAstroboyid Posted March 9, 2015 Share Posted March 9, 2015 I just updated to 10.10.3 beta on epci HD 24gb comes with my asus s400ca. reboot got panic, replacing AppleIntelHD4000Graphics with 10.10.2 resolve the panic, move pages lags, still able to use photoshop you tube and hd movies. still works HD audio facetime, imsg , mic work with face time and call voice only. touch screen still works all F keys replace the wifi with Broadcom BCM94322HM8L WIFI Wireless Card still works. censors ,battery , temps trackpad HDMI video , no audio , even on 10.10.2 same issue. The problem with some laptop with 10.10.3 public beta may be the intel hd kexts, on final beta this may be resolve =) i5 3rd gen with intel HD 4000 Link to comment Share on other sites More sharing options...
Jithin Chandran Posted March 10, 2015 Share Posted March 10, 2015 Ok I'm happy to tell that I've installed from the start Yosemite on my SSD and also updated to 10.10.3 and everything is working great!!!! Now I will go into the second phase and will try to install windows 10 preview on my other SSD. I have couple of questions if it's ok : 1. First I will make the windows 10 install disk. I've downloaded the ISO image from Microsoft website and I will burn it on a DVD using the Disk Utility tool. Will this will work fine and boot? 2. As I understand I need to disconnect the SSD with the OS X and only leave the new SSD I want to install on it the windows 10. 3. Also is there anything I need to do after the install complete? After I will connect the both SSD will the Clover boot will show and will let me choose what OS I want? Is it out of the box? 4. I will update my hardware on my signature but I will also mention that I have intel i5 with gigabyte GA-m87h-hd3 Many thanks 1. That's Fine 2. Yes. Only connect the SSD in which you are installing Windows. 3. Is your system capable for UEFI boot mode? Once you installed windows connect both SSDs then try boot windows through CLOVER. 4. If the details are in your signature it will reflect in all of your posts. So other's can avoid the scroll back to first posts. Good Luck..! Link to comment Share on other sites More sharing options...
Recommended Posts