hitman478 Posted March 1, 2015 Share Posted March 1, 2015 Hello, I have a problem with my Intel HD 3000 that the HDMI work fine when it is plugged in before I start the system. When I unplug the cable and plug it in when the system is running then my external monitor is not recognized and I also cannot see in in the monitor setup. I use the SMBIOS MacBookPro 8.1 with clover. The Graphic Card is full recognized with 512MB RAM and I can use full resolution. Is there a fix for it? My system specs are Motherboard: CPU Type Mobile QuadCore Intel Core i7-2720QM, 2733 MHz (30 x 91) Motherboard Name Clevo W150HNM/W170HN Motherboard Chipset Intel Cougar Point HM65, Intel Sandy Bridge System Memory 8106 MB (DDR3-1333 DDR3 SDRAM) DIMM1: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz) DIMM3: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz) BIOS Type Phoenix (10/07/11) Video Adapter Intel(R) HD Graphics 3000 (2108 MB) Video Adapter NVIDIA GeForce GT 540M (1 GB) Audio Adapter Intel Cougar Point HDMI @ Intel Cougar Point PCH - High Definition Audio Controller [B-3] Audio Adapter Realtek ALC269 @ Intel Cougar Point PCH - High Definition Audio Controller [B-3] IDE Controller JMicron PCIe MS Host Controller IDE Controller JMicron PCIe SD Host Controller IDE Controller JMicron PCIe SD/MMC Host Controller IDE Controller Standardmäßiger SATA AHCI- Controller Network Adapter Intel(R) Centrino(R) Advanced-N 6230 Network Adapter JMicron PCI Express Gigabit Ethernet Adapter (172.16.1.177) I use the original Kext that were shipped with Yosemite. I also attach my DSDT if needed. Thanks for the help. DSDT.zip Link to comment Share on other sites More sharing options...
Recommended Posts