Kernel panic with Bronya, Tora Chi 10.10 kernels

exitc0de · March 1, 2015

First post, so tell me if in wrong place .

When booting up the pandora installer with both Tora Chi and Bronya kernels I get this kernel panic (see attached).

If I don't boot in safe mode I get stuck at CheckSleepCapability as well.

Is this a problem with the kernel or my setup, and is there a fix?

The flags I used are listed in the image.

My specs:
AMD FX-6300

MSI 970a G43

AMD Radeon R9 270

I also attached pandora's box settings.

Thanks in advance

carlo_67 · March 1, 2015

Replace the usb this Extra

Replace the folder Kernel in S / L

unzip first

repairing permissions with kext wixard

and test

Extra.zip

Kernels.zip

Codinger · March 1, 2015

What were your bootflags? Maybe cpus=1 and npci=0x2000 and GraphicsEnabler=No can fix it

happy hacking

OSBeast

exitc0de · March 1, 2015

Replace the usb this Extra

Replace the folder Kernel in S / L

unzip first

repairing permissions with kext wixard

and test

Nope, still invalid kernel opcode but this time the same line repeatedly along with invalid kernel ip.

carlo_67 · March 1, 2015

install these in S / L / E

http://www.insanelymac.com/forum/files/file/354-amd-replace-kext-for-yosemite/

repairing permissions with kext wixard

gils83 · March 1, 2015

use chameleon or Clover

exitc0de · March 1, 2015

install these in S / L / E

http://www.insanelymac.com/forum/files/file/354-amd-replace-kext-for-yosemite/

repairing permissions with kext wixard

Does this only work with pandora? I'm going to try using that tool that shall not be named by that guy called tony.

Pandora changes the location of everything but in kext wizard, with the usb selected, extra is greyed out.

carlo_67 · March 1, 2015

I personally used to install Pandora Yosemite

not to be no problem with AMD and your hardware does not go away from my

then try to make the usb With Pandora

no support for Tony bla bla bla

exitc0de · March 1, 2015

I personally used to install Pandora Yosemite

not to be no problem with AMD and your hardware does not go away from my

then try to make the usb With Pandora

no support for Tony bla bla bla

I was getting sleepcapability freeze unless I booted with safe mode with pandora and not with tony's tool, is there a fix for that? :L

(AppleUSBOHCI CheckSleepCapability freeze)

Bronya · March 1, 2015

HI exitcode ! First copy dvd Yosemite on partition and copy kernel and extensions :NullCpuPowermanagement.kext and etc . And start install from Install_Yosemite !

exitc0de · March 1, 2015

HI exitcode ! First copy dvd Yosemite on partition and copy kernel and extensions :NullCpuPowermanagement.kext and etc . And start install from Install_Yosemite !

Sorry, I get the kernel and extensions, but what do you mean by copying dvd Yosemite on partition? Also, what do you mean about installing Yosemite at the end of your post? I'm new to hackintoshing so I apologise for my ignorance .

(So far, I have my pandora's box installer usb with the kernel carlo gave, I will then put the extra folder he gave me, then the extensions - then what? repair permissions, then boot?)

I personally used to install Pandora Yosemite

not to be no problem with AMD and your hardware does not go away from my

then try to make the usb With Pandora

no support for Tony bla bla bla

Ok, I did exactly what you said, replaced everything, used pandora's box, used your kernel and booted up with USBBusFix=Yes and npci=0x2000 as well as cpus=1 and -v and I now get the same message, invalid kernel opcode (64 bit) several times a second in a loop. Is there anything I can do at all to fix this or will there be a new kernel that fixes this? If not, I will probably buy an intel cpu.

Thanks

carlo_67 · March 2, 2015

Sorry, I get the kernel and extensions, but what do you mean by copying dvd Yosemite on partition? Also, what do you mean about installing Yosemite at the end of your post? I'm new to hackintoshing so I apologise for my ignorance .

(So far, I have my pandora's box installer usb with the kernel carlo gave, I will then put the extra folder he gave me, then the extensions - then what? repair permissions, then boot?)

Ok, I did exactly what you said, replaced everything, used pandora's box, used your kernel and booted up with USBBusFix=Yes and npci=0x2000 as well as cpus=1 and -v and I now get the same message, invalid kernel opcode (64 bit) several times a second in a loop. Is there anything I can do at all to fix this or will there be a new kernel that fixes this? If not, I will probably buy an intel cpu.

Thanks

fix those already put them in the Goodies folder in org.Chamaleon.boot.plist

start with flag

-v -f AtiConfig=Futomaki busratio=18 npci=0x2000

tragediana150 · March 2, 2015

I has always invalid opcode when I was using Chameleon. I used Enoch instead of Chameleon and I was able to boot to the Installer. Unfortunatelly then freeze after instalation

Try Enoch dude.

Good Luck

Edited March 2, 2015 by tragediana150

spakk · March 2, 2015

If the the current Enoch Version should not work, so use on of this older version

Enoch-rev.2588.pkg.zip

Enoch-rev.2571.pkg.zip

Enoch-rev.2468.pkg.zip

Enoch-rev.2403.pkg.zip

tragediana150 · March 2, 2015

I used Enoch 2468 and it is working, but when I updated Enoch to the newest version then I've got KP or invalid opcode

spakk · March 2, 2015

@tragediana150, I have the same problem, I am using an older version of Enoch Chamelion ...

exitc0de · March 3, 2015

Thank you so much for all the help, I will try again this evening when I get home. Hopefully this time it will work but the chameleon being broken would explain a lot.

Edit:
I was using pandora with enoch selected, would that download the latest version which doesn't work? I still got invalid kernel opcode.

icex3 · March 3, 2015

I have akin troubles with sleep/shutdown and getting Steam to run in wine without panicking. It`s more likely been triggered by wine itself though; when i tried to create an empty wrapper in wineskin winery system just reboot shortly after the configuration window appears without any reports about it being dumped in DiagnosticReports folder. (first encountered in niresh 10.10.1 bsa amd kernel r7d + patched System.kext, AppleACPIPlatform.kext, IOPCIFamily.kext, http://imgur.com/viybn2u)

I did a fresh USB install from the original App Store OS X Yosemite image with bronya`s rc3 kernel replacement and NullCPUPM, VoodooHDA(2.8.4)//PS/2(1.8.14), AppleACPIP, IOPCIF, RealtekRTL8111 (ver. 1.2.3
) kexts because niresh distro was too buggy (random freezes, no gui loaded, etc) and refused to boot by clover. Adding maxmem=4028 in config.plist boot-args seemed to work out a few boots but system soon ended up in a dumpster shape with corrupted video driver during my incompetent attempts to mess with kexts, bios settings and clover fixes at the same time. (http://coub.com/view/59lkg).

Now I have OS X Yosemite 10.10 (bronya rc5 kernel) + clover rev. 3176 installed on my hdd with aforementioned kexts placed in /EFI/CLOVER/kexts/10.10/ except patched AppleACPIP and IOPCIF in /S/L/E/ with several DSDT fixes enabling improperly functioning shutdown (instead of a kp and following after it reboot it does throw a kernel trap kp report that looks alike when Steam crashes the system in DiagnosticReports right before reboot / turning my pc off). With msi=0x90 I don’t get panic reports including nvda and com.apple.driver.appleacpiplatform in backtrace, only ones mentioning cpu fault kernel trap, memory corruption, kalloc errors (sorry don’t have an example, old log files are overwritten). Also worth to mention it here that Steam runs without causing a kp if there are opened 3-4 system utils and a browser with >6 tabs so the problem can hide in ram handling by the kernel.

KPs

http://pastebin.com/pp8gd2v5

http://pastebin.com/t1TBpuph

http://pastebin.com/QH0QxTRy

config.plist

http://pastebin.com/b3i9Yfrv

specs:

1. CPU: AMD Athlon X4 860K

2. MB: Gigabyte F2A68HM-S1
3. GPU: Palit GTX 650 1024 Mb GDDR5 + SXGA display via d-sub
4. RAM 4 Gb

gils83 · March 3, 2015

specs:

1. CPU: AMD Athlon X4 860K

2. MB: Gigabyte F2A68HM-S1

3. GPU: Palit GTX 650 1024 Mb GDDR5 + SXGA display via d-sub

4. RAM 4 Gb

deleted dsdt and use Clover 2695 uefi and use : AMD replace kext for Yosemite

change fsb , frequency cpu and flag GPU

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>Fixes</key>
			<dict>
				<key>AddDTGP_0001</key>
				<true/>
				<key>AddMCHC_0008</key>
				<false/>
				<key>FakeLPC_0020</key>
				<false/>
				<key>FixAirport_4000</key>
				<true/>
				<key>FixDarwin_0002</key>
				<false/>
				<key>FixDisplay_0100</key>
				<true/>
				<key>FixFirewire_0800</key>
				<true/>
				<key>FixHDA_8000</key>
				<true/>
				<key>FixHPET_0010</key>
				<true/>
				<key>FixIDE_0200</key>
				<false/>
				<key>FixIPIC_0040</key>
				<true/>
				<key>FixLAN_2000</key>
				<true/>
				<key>FixSATA_0400</key>
				<false/>
				<key>FixSBUS_0080</key>
				<false/>
				<key>FixShutdown_0004</key>
				<true/>
				<key>FixUSB_1000</key>
				<false/>
				<key>NewWay_80000000</key>
				<true/>
				<key>FIX_RTC_20000</key>
				<true/>
				<key>FIX_TMR_40000</key>
				<true/>
				<key>AddIMEI_80000</key>
				<true/>
				<key>FIX_INTELGFX_100000</key>
				<false/>
				<key>FIX_WAK_200000</key>
				<true/>
				<key>DeleteUnused_400000</key>
				<true/>
				<key>FIX_ADP1_800000</key>
				<true/>
				<key>AddPNLF_1000000</key>
				<true/>
				<key>FIX_S3D_2000000</key>
				<true/>
				<key>FIX_ACST_4000000</key>
				<true/>
				<key>AddHDMI_8000000</key>
				<true/>
				<key>FixRegions_10000000</key>
				<true/>
			</dict>
			<key>Name</key>
			<string>DSDT.aml</string>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
		</array>
		<key>HaltEnabler</key>
		<true/>
		<key>SSDT</key>
		<dict>
			<key>Generate</key>
			<dict>
				<key>CStates</key>
				<true/>
				<key>PStates</key>
				<true/>
			</dict>
			<key>EnableC7</key>
			<false/>
			<key>EnableC6</key>
			<true/>
			<key>EnableC4</key>
			<false/>
			<key>EnableC2</key>
			<false/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
                <key>Arguments</key>
		<string>npci=0x2000 kext-dev-mode=1</string>		       
                <key>DefaultVolume</key>
		<string>Yosemite</string>
		<key>Fast</key>
		<false/>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Log</key>
		<false/>
		<key>Timeout</key>
		<integer>1</integer>
		<key>XMPDetection</key>
		<string>-1</string>
        </dict>
	<key>CPU</key>
	<dict>
		<key>BusSpeedkHz</key>
		<integer>100000</integer>
		<key>FrequencyMHz</key>
		<integer>2050</integer>	
        </dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>No</string>
		</dict>
		<key>FakeID</key>
		<dict>
			<key>ATI</key>
			<string>0x0</string>
			<key>IntelGFX</key>
			<string>0x0</string>
			<key>LAN</key>
			<string>0x0</string>
			<key>NVidia</key>
			<string>0x0</string>
			<key>SATA</key>
			<string>0x0</string>
			<key>WIFI</key>
			<string>0x0</string>
			<key>XHCI</key>
			<string>0x0</string>
			<key>IMEI</key>
			<string>0x0</string>
		</dict>
		<key>Inject</key>
		<false/>
		<key>USB</key>
		<dict>
			<key>AddClockID</key>
			<false/>
			<key>FixOwnership</key>
			<false/>
			<key>Inject</key>
			<false/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>Nothing</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Hide</key>
		<array>
			<string>Windows</string>
			<string>BOOTX64.EFI</string>
		</array>
		<key>Language</key>
		<string>en:0</string>
		<key>Mouse</key>
		<dict>
			<key>Enabled</key>
			<true/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<true/>
			<key>Tool</key>
			<true/>
		</dict>
		<key>TextOnly</key>
		<false/>
		<key>Theme</key>
		<string>metal</string>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>FBName</key>
		<string>Lotus</string>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<false/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>VRAM</key>
		<integer>1024</integer>
		<key>VideoPorts</key>
		<integer>2</integer>

		</dict>
		<key>PatchVBios</key>
		<false/>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>External icons patch</string>
				<key>Find</key>
				<data>RXh0ZXJuYWw=</data>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<data>SW50ZXJuYWw=</data>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>LogEveryBoot</key>
		<string>10</string>
		<key>LogLineCount</key>
		<integer>3000</integer>
		<key>MountEFI</key>
		<true/>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Detect</string>
		<key>InjectSystemID</key>
		<true/>
	</dict>
</dict>
</plist>

icex3 · March 4, 2015

@gils83 i couldn't get os x to boot up with edited config you posted and clover 2695, it always gets stuck at iobluetoothhcicontroller string, though it worked with 3176 and shutdown functioned correctly steam still caused panics I put back backup with my old /CLOVER/ catalog and initial config but encountered the same behavior (even native steam game dota 2 cause system to reboot with the same kernel trap kp when i tried to access in-game settings, cinebench r15 OpenGL test and glxgears never triggered any kps yet). I replaced appleacpi and iopci kexts in case of corruption and rebuilt kextcache again, now the situation is as it was before: kp after system halts and auto-reboot. Maybe there's a conflict between NVDA.kext and RealtekRTL8111 or Voodoo drivers, I've seen Mieze (RRTL8111 driver dev) post mentioning that npci=0x2000 flag should be avoided and possibly can be the reason of network driver malfunctioning.

http://imgur.com/PqbBGad,dwjyPEH

Anonymous UUID:       0882B8FE-6A3B-1358-E2EB-B0B910D3A08B

Wed Mar  4 03:44:06 2015

*** Panic Report ***
panic(cpu 2 caller 0xffffff8009425f4a): Kernel trap at 0xffffff8009766021, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00007fb11b0bb000, CR3: 0x00000000069bc000, CR4: 0x0000000000040660
RAX: 0x0000000000000010, RBX: 0xffffff8018fd4960, RCX: 0xff9fffd4ff61ffb2, RDX: 0xff39ff5aff65ffb3
RSP: 0xffffff80a5333a50, RBP: 0xffffff80a5333c30, RSI: 0x0000000054f6efd0, RDI: 0xffffff8009aca0c0
R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0x0000000000002000, R11: 0x0000000000000010
R12: 0xffffff8009afeaa0, R13: 0x0000000000000000, R14: 0xffffff8018fcbf68, R15: 0xffffff8017032008
RFL: 0x0000000000010282, RIP: 0xffffff8009766021, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x00007fb11b0bb000, Error code: 0x0000000000000000, Fault CPU: 0x2

mp = 0xffffff8016d74c00, phys = 0x726cc00, prev (0x2: 0x1000000-0x1100000)
vp = 0xffffff8016d74c00, phys = 0xc9333960, prev (0x2: 0xb6ee000-0xea09000)
0xffffff8016d73000: 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
0xffffff8016d74000: 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
0xffffff8016d75000: WgAAAF4AAABkAAAAAAAAAAAAAAAAAAAAACAgIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwgIAaHwoHLQAGQAoxAAAAABIDABAAAIAAFn0AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHh8JByAAAIAAAAAAAAAiAi9kZXYvZGlzazBzMgggAxeA////AAAAAgABAAAAAEAAAwAAABDjCgAAAAAhAM8TFwEAAABA9NsWQFbXFgAQAAAAAAIA/w8AAAAAACH/////wCxJFoD///8CAAAAAAAAAADnDu7uAs4CAAwMAACCEABioP4/gAvwP4BDCSYAgQAgIAQAAAAA
Backtrace (CPU 2), Frame : Return Address
0xffffff809e435e10 : 0xffffff800933f991 
0xffffff809e435e90 : 0xffffff8009425f4a 
0xffffff809e436050 : 0xffffff8009440c93 
0xffffff809e436070 : 0xffffff8009766021 
0xffffff80a5333c30 : 0xffffff8009767a09 
0xffffff80a5333cf0 : 0xffffff800975bdc5 
0xffffff80a5333d20 : 0xffffff800954413b 
0xffffff80a5333dd0 : 0xffffff8009759347 
0xffffff80a5333eb0 : 0xffffff800955dd6b 
0xffffff80a5333ed0 : 0xffffff80095483f4 
0xffffff80a5333f40 : 0xffffff80095525f7 
0xffffff80a5333f50 : 0xffffff800984ee72 
0xffffff80a5333fb0 : 0xffffff8009441496 

BSD process name corresponding to current thread: launchd
Boot args: -v dart=0 darkwake=8 npci=0x2000 kext-dev-mode=1 msibase=0x90 

Mac OS version:
14A389

Kernel version:
Darwin Kernel Version 14.0.0: Thu Feb 12 18:42:32 MSK 2015; ###Bronya###:xnu-2782.1.97_amd/BUILD/obj/RELEASE_X86_64
Kernel UUID: 0D4D56E9-AE03-33C2-BCBA-B6642B03FA09
Kernel slide:     0x0000000009000000
Kernel text base: 0xffffff8009200000
__HIB  text base: 0xffffff8009100000
System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)

System uptime in nanoseconds: 99485301821
last loaded kext at 30410324464: com.apple.driver.AppleGraphicsDevicePolicy	3.7.7 (addr 0xffffff7f8b0a5000, size 45056)
loaded kexts:
org.rehabman.voodoo.driver.PS2Mouse	1.8.14
org.rehabman.voodoo.driver.PS2Trackpad	1.8.14
org.rehabman.voodoo.driver.PS2Keyboard	1.8.14
com.insanelymac.RealtekRTL8111	1.2.3
org.voodoo.driver.VoodooHDA	2.8.4
net.osrom.kext.Disabler	1.0.1
org.netkas.driver.FakeSMC	4.2.13
org.rehabman.voodoo.driver.PS2Controller	1.8.14
org.tgwbd.driver.NullCPUPowerManagement	1.0.0d2
com.apple.driver.AppleGraphicsDevicePolicy	3.7.7
com.apple.driver.AppleTyMCEDriver	1.0.2d2
com.apple.filesystems.autofs	3.0
com.apple.iokit.IOBluetoothSerialManager	4.3.0f10
com.apple.driver.AppleOSXWatchdog	1
com.apple.driver.AppleUpstreamUserClient	3.6.1
com.apple.driver.AppleMCCSControl	1.2.10
com.apple.GeForce	10.0.0
com.apple.iokit.IOUserEthernet	1.0.1
com.apple.nvidia.NVDAStartup	10.0.0
com.apple.Dont_Steal_Mac_OS_X	7.0.0
com.apple.driver.AudioAUUC	1.70
com.apple.driver.AppleHWAccess	1
com.apple.driver.AppleHV	1
com.apple.driver.ACPI_SMC_PlatformPlugin	1.0.0
com.apple.driver.XsanFilter	404
com.apple.iokit.IOAHCIBlockStorage	2.6.5
com.apple.driver.AppleFileSystemDriver	3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless	1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib	1.0.0d1
com.apple.BootCache	35
com.apple.driver.AppleUSBHub	705.4.1
com.apple.driver.AppleUSBXHCI	705.4.14
com.apple.driver.AppleUSBEHCI	705.4.14
com.apple.driver.AppleUSBOHCI	656.4.1
com.apple.driver.AppleAHCIPort	3.0.7
com.apple.driver.AppleHPET	1.8
com.apple.driver.AppleACPIButtons	1.7
com.apple.driver.AppleRTC	2.0
com.apple.driver.AppleSMBIOS	2.1
com.apple.driver.AppleAPIC	1.7
com.apple.nke.applicationfirewall	161
com.apple.security.quarantine	3
com.apple.security.TMSafetyNet	8
com.apple.driver.AppleGraphicsControl	3.7.21
com.apple.kext.triggers	1.0
com.apple.iokit.IOSerialFamily	11
com.apple.driver.AppleSMBusController	1.0.13d1
com.apple.iokit.IOSMBusFamily	1.1
com.apple.iokit.IOAcceleratorFamily2	156.4
com.apple.nvidia.driver.NVDAGK100Hal	10.0.0
com.apple.nvidia.driver.NVDAResman	10.0.0
com.apple.AppleGraphicsDeviceControl	3.7.21
com.apple.iokit.IONDRVSupport	2.4.1
com.apple.iokit.IOUSBUserClient	705.4.0
com.apple.iokit.IOSurface	97
com.apple.iokit.IOBluetoothFamily	4.3.0f10
com.apple.driver.AppleSMBusPCI	1.0.12d1
com.apple.iokit.IOGraphicsFamily	2.4.1
com.apple.driver.AppleSMC	3.1.9
com.apple.driver.IOPlatformPluginLegacy	1.0.0
com.apple.driver.IOPlatformPluginFamily	5.8.0d49
com.apple.iokit.IOSCSIArchitectureModelFamily	3.7.0
com.apple.iokit.IOUSBHIDDriver	705.4.0
com.apple.driver.AppleUSBComposite	705.4.9
com.apple.iokit.IONetworkingFamily	3.2
com.apple.driver.AppleEFINVRAM	2.0
com.apple.iokit.IOAudioFamily	200.6
com.apple.vecLib.kext	1.2.0
com.apple.iokit.IOUSBFamily	705.4.14
com.apple.iokit.IOAHCIFamily	2.7.0
com.apple.driver.AppleEFIRuntime	2.0
com.apple.iokit.IOHIDFamily	2.0.0
com.apple.security.sandbox	300.0
com.apple.kext.AppleMatch	1.0.0d1
com.apple.driver.AppleKeyStore	2
com.apple.driver.AppleMobileFileIntegrity	1.0.5
com.apple.driver.AppleCredentialManager	1.0
com.apple.driver.DiskImages	389.1
com.apple.iokit.IOStorageFamily	2.0
com.apple.iokit.IOReportFamily	31
com.apple.driver.AppleFDEKeyStore	28.30
com.apple.driver.AppleACPIPlatform	1.7
com.apple.iokit.IOPCIFamily	2.9
com.apple.iokit.IOACPIFamily	1.4
com.apple.kec.corecrypto	1.0
com.apple.kec.Libm	1
com.apple.kec.pthread	1

#McFly · July 16, 2015

deleted dsdt and use Clover 2695 uefi and use : AMD replace kext for Yosemite

change fsb , frequency cpu and flag GPU

I try clean install 10.10.4 with kernel Bronya and Tora Chi Yo, both on two opcode error

Kernel Tora Chi Yo opcode infinite and no load the OS (last)

kernel Bronya opcode and restarting my machine.

with or without the package 10.10.4 from Gils83

i'm using Clover bootloader with and without fsb=200 MHz on config.plist

SMBios MacPro 3,1 with DSDT, no error and no warning.

Motherboard: ASUS M3A78

Processor: Phenom II x4 945 | fsb 201 busratio 15 | 3015 MHz

One small advance.... Or Not!

already researched this forum an explanation,I follow the guidelines of the developers and testers in [AMD] Yosemite Kernel Testing and I got it install but does not work the video acceleration, bluetooth and after a few minutes the machine restarts.

I had the 10.10.3 version installed and running normal just needed add some kexts as AMDx4000.kext (rollback) and FakeSMC, NullCPU, SuperVIAATA.

Sorry my english, it is bad....

gils83 · July 16, 2015

reboot flag : -f with chameleon and rebuilt cache system with kext wizard

#McFly · July 17, 2015

reboot flag : -f with chameleon and rebuilt cache system with kext wizard

Outside the kexts IOPCI, AppleACPI and pthread, has another new kext to put in S / L / E?

-v and NPCI = 0x2000 (always)

I've tried -x or -f

nothing yet

the worst is that I need the system to work for work and my iMac is dismantled and is too slow to work, do not know what else to do, I've tried everything.

i don't know english right, sorry

i go try infinitely, one hour i reach :yes:

Edited July 17, 2015 by #McFly

theconnactic · July 17, 2015

the worst is that I need the system to work for work and my iMac is dismantled and is too slow to work

I had the 10.10.3 version installed and running normal just needed add some kexts as AMDx4000.kext (rollback) and FakeSMC, NullCPU, SuperVIAATA.

You just answered the solution for your afflictions: revert to 10.10.3 for now. It makes no sense having the latest and less-tested point version in an AMD hackintosh when you need it for making a living. In fact, using an AMD hackintosh professionally is living on the edge, always.

spakk · July 17, 2015

Outside the kexts IOPCI, AppleACPI and pthread, has another new kext to put in S / L / E?

-v and NPCI = 0x2000 (always)

I've tried -x or -f

nothing yet

the worst is that I need the system to work for work and my iMac is dismantled and is too slow to work, do not know what else to do, I've tried everything.

i don't know english right, sorry

i go try infinitely, one hour i reach

I agree 100% to theconnatic. Basically, always install a working system on your main hard drive !! (In an emergency return to Yosemite 10.10. 2 or 10.10.3)

to always test on an extended partion or better installed on an external hard drive and test, everything else is not recommended if you use your hackintosh

for their daily work.

your test run with Yosemite 10.10.4 with amd Kernel by Tora Chi Yo, you wrote that you have received an OPCODE Error.

What is the Error Message? please describe the OPCODE Error Message in detail or make an image of the error message and upload it here.

Maybe you can fix the problem as in the other older beta versions by exchanging system drivers or by adjusting the kernel. The kernel adjustments should then be made by Tora Chi Yo or Bronya ?

Kernel panic with Bronya, Tora Chi 10.10 kernels

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites