Micle123456789 Posted February 8, 2015 Share Posted February 8, 2015 Hi guys! I've got a problem with hd 3000 on yosemite. i've installed niresh version. I couldn't boot with any flags, so i decided to copy SNBGraphics kext using mac drive., i've managed to start the system, but there are lots of freezes, and video doesn't work properly. Using kext utillity i've tried to install hd3000 kexts for yosemite and repair permissions. but after repairing permissions, it stops working at all, and can't boot at all. Even if you just repair permissions (only with SnbGraphics.kext) you can't boot. lenovo g580 My specs: intel 2328m hd3000 4gb ram tried to use different kexts like Do youhave any ideas? NEW.Intel.HD.3000.&.HD.4000.Driver.10.10.1.KemalALKIN.zip AppleIntelSNBGraphicsFB.kext.zip Link to comment Share on other sites More sharing options...
anonymousnbs Posted February 8, 2015 Share Posted February 8, 2015 Hi guys! I've got a problem with hd 3000 on yosemite. i've installed niresh version. I couldn't boot with any flags, so i decided to copy SNBGraphics kext using mac drive., i've managed to start the system, but there are lots of freezes, and video doesn't work properly. Using kext utillity i've tried to install hd3000 kexts for yosemite and repair permissions. but after repairing permissions, it stops working at all, and can't boot at all. Even if you just repair permissions (only with SnbGraphics.kext) you can't boot. lenovo g580 My specs: intel 2328m hd3000 4gb ram tried to use different kexts like Do youhave any ideas? hi guys .. method distro niresh not support by member insanelymac .. please delete and watching video and follow this if u have problems please inbox or answer topic https://www.youtube.com/watch?feature=player_embedded&v=kH9TDSlejPc Link to comment Share on other sites More sharing options...
styrian Posted February 9, 2015 Share Posted February 9, 2015 @ Micle123456789 Hello! Here you go: http://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/?p=1883725 I don´t know, if it is realy working. Because of lacking hardware I could not try it by myself. Have fun. Link to comment Share on other sites More sharing options...
Micle123456789 Posted February 21, 2015 Author Share Posted February 21, 2015 i've installed everything with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], but i still can't get hd3000 working normally. motherboard is 7 series, have changed 0x to 0e but nothing happened Link to comment Share on other sites More sharing options...
styrian Posted February 22, 2015 Share Posted February 22, 2015 Hello! Your install method is not supported here. If you need support for it, please hand over to where you have got it from. http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/ http://www.insanelymac.com/forum/topic/275941-very-important-please-read-about-tonymacx86-and-iatkos-m/ You will for sure get proper support for here featured bootloaders and tools. You can get them in Downloads. Have fun. Link to comment Share on other sites More sharing options...
Micle123456789 Posted February 22, 2015 Author Share Posted February 22, 2015 as far as i understand there is no difference how to install yoemite (either [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or using insanelymac instruction) the main thing is that i can't get working mac using insanelymac instruction. after the installing of any method i have a problem using hd3000 (as far as i understand, due to my motherboard) so I appreciate any help of getting hd3000 or nvidia (as far as i know it's unreal to get it working) getting working. I've tried different kext's, and it didn't worked for me. as far as i understand i should patch dsdt (which i tried to patch) but it doesn't work (or i'm not doing it right). So if you have any suggestions, please send it to me, because i'm stuck. Thanks for your help! Link to comment Share on other sites More sharing options...
styrian Posted February 23, 2015 Share Posted February 23, 2015 Hello! You can try this: http://www.insanelymac.com/forum/topic/208410-fixing-scrambledstretched-or-wrong-resolution-laptop-display-problems/ No support by PM. Have fun. Link to comment Share on other sites More sharing options...
redneck Posted March 1, 2015 Share Posted March 1, 2015 I have yosemite 10.10.3 installed on Dell5420>intel HD3000. Only boots with video with -F not -f Link to comment Share on other sites More sharing options...
styrian Posted March 1, 2015 Share Posted March 1, 2015 @ rednek Hello! It is hard to help you because of your unknown hardware, bootloader, install method and used SMBios.. Please put your relevant hardware in your signature like many others have done it here. Perhaps your problem can be solved in this way: http://www.insanelymac.com/forum/topic/259705-editing-custom-connector-info-for-intel-hd-3000-graphics-sandy-bridge-osx-lion/?hl=%20appleintelsnbgraphics Have fun. Link to comment Share on other sites More sharing options...
Recommended Posts