sekndz Posted January 29, 2015 Share Posted January 29, 2015 Hi guys! I'm having problem with my install. I cannot boot to the install since i'm getting KP ( Unable to find driver ACPI ). I'm not really sure will i need to patch my bios for to get it work or what?I'm using Clover and i've tried to boot with nv_disable=1 since i have GTX 970. So i think it's not my graphics card which is causing this problem. Specs: - Intel i7 4770k - Gigabyte Z97X-Gaming 5 - Asus Strix GTX 970 - Kingston HyperX 1600MHz 2x 4GB If more info needed just ask! Thanks in advance! Link to comment Share on other sites More sharing options...
naujoks Posted February 1, 2015 Share Posted February 1, 2015 I'm having the same problem. My Hackintosh worked fine with the GTX 780, but since I put the GXT 970 in there I'm getting the ACPI error, right at the start. I tried a [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] install as well instead of Clover, but that was no go as well and it got stuck at the loading screen. Link to comment Share on other sites More sharing options...
axiomfunk Posted February 4, 2015 Share Posted February 4, 2015 same problems with the h97 plus and gtx 760, only way to get over this was to install niresh with the nvidia backup drivers and chamaleon, but it goes into a not clean installation and i can't solve it Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 4, 2015 Share Posted February 4, 2015 Use my Install Guide found in my Signature and then use the Clover Config File found on my Haswell DMG for the installer. You must boot with the Nvidia Disable flag for install and then post install use the Haswell DMG and then install the Nvidia Retail Drivers for the GPU. A SMBIOS Change will be needed for the Install of the Nvidia Retail Drivers. Link to comment Share on other sites More sharing options...
Recommended Posts