niel07 Posted January 12, 2015 Share Posted January 12, 2015 I successfully installed Yosemite 10.10 on my Dell PC Optiplex 7010 with clover v2k_r3113 but Stuck at Missing Bluetooth Controller Transport!tried flags such as GraphicsEnabler=Yes , PCIRootUID=1 but no luck.Shall i need to try any other boot flags ? Does any kext or DTST required for Radeon HD 7770 Installing on PC- CPU: Intel i5-3570 Lvy Bridge Quad-Core 3.4 Ghz Socket GA1155- Motherboard #: Intel Q77 Express- Video: Radeon HD 7770 GHZ Edition 1GB GDDR5 FLEX Link to comment Share on other sites More sharing options...
mnfesq Posted January 12, 2015 Share Posted January 12, 2015 That usually means that your graphics drivers are not loading. I suspect your graphics is probably the onboard Intel HD4000, not the Radeon GPU. Check your BIOS to make sure that you are using the Radeon GPU and not the onboard graphics. Also, make sure you inject ATI graphics in Clover options and also check patch vbios. Link to comment Share on other sites More sharing options...
countercharge Posted January 27, 2015 Share Posted January 27, 2015 I am also having this problem, although I haven't yet been able to install yosmite, rather the situation is that the installer gets stuck at this point. I figured out what graphics I have (intel hd), but where am I supposed to put the kext? in S/L/E on the usb installer, or in the Extra folder? I'm attempting to install on a thinkpad t510 Link to comment Share on other sites More sharing options...
jamiethemorris Posted January 28, 2015 Share Posted January 28, 2015 GraphicsEnabler=Yes is a Chameleon parameter so it won't do anything with Clover. The first thing I would try is enabling this in your config.plist: <key>Inject</key> <dict> <key>Intel</key> <true/> </dict> If that doesn't work, leave intel injection enabled and try experimenting with each of this option in Clover: http://clover-wiki.zetam.org/Configuration/Graphics#ig-platform-id Try each one of those until you find one that works. If neither of those things works, see this post http://olarila.com/forum/viewtopic.php?f=28&t=3111 he explains how to generate an EFI string. After you do that, you just add the EFI string to the device-properties option in Clover. 1 Link to comment Share on other sites More sharing options...
anonymousnbs Posted January 30, 2015 Share Posted January 30, 2015 GraphicsEnabler=Yes is a Chameleon parameter so it won't do anything with Clover. The first thing I would try is enabling this in your config.plist: <key>Inject</key> <dict> <key>Intel</key> <true/> </dict> If that doesn't work, leave intel injection enabled and try experimenting with each of this option in Clover: http://clover-wiki.zetam.org/Configuration/Graphics#ig-platform-id Try each one of those until you find one that works. If neither of those things works, see this post http://olarila.com/forum/viewtopic.php?f=28&t=3111 he explains how to generate an EFI string. After you do that, you just add the EFI string to the device-properties option in Clover. please install yosemite with clover AMD 7770 .. working with yosemite https://www.youtube.com/watch?v=kH9TDSlejPc Link to comment Share on other sites More sharing options...
Recommended Posts