ennaldle223 Posted January 2, 2015 Share Posted January 2, 2015 I'm using HD 4600 and brightness is not working, and Clover's addPNLF is also not working, so i'm decided use my own patched DSDT. but I have compile error " dsdt.dsl 8339: Arg0Error 4096 - parse error ^ " I don't have idea about this... Method (PNOT, 0, Serialized) { If (LGreater (TCNT, One)) { If (And (PDC0, 0x08)) { Notify (\_PR.CPU0, 0x80) If (And (PDC0, 0x10)) { Notify (\_PR.CPU0, 0x81) } } If (And (PDC1, 0x08)) { Notify (\_PR.CPU1, 0x80) If (And (PDC1, 0x10)) { Notify (\_PR.CPU1, 0x81) } } If (And (PDC2, 0x08)) { Notify (\_PR.CPU2, 0x80) If (And (PDC2, 0x10)) { Notify (\_PR.CPU2, 0x81) } } If (And (PDC3, 0x08)) { Notify (\_PR.CPU3, 0x80) If (And (PDC3, 0x10)) { Notify (\_PR.CPU3, 0x81) } } If (And (PDC4, 0x08)) { Notify (\_PR.CPU4, 0x80) If (And (PDC4, 0x10)) { Notify (\_PR.CPU4, 0x81) } } If (And (PDC5, 0x08)) { Notify (\_PR.CPU5, 0x80) If (And (PDC5, 0x10)) { Notify (\_PR.CPU5, 0x81) } } If (And (PDC6, 0x08)) { Notify (\_PR.CPU6, 0x80) If (And (PDC6, 0x10)) { Notify (\_PR.CPU6, 0x81) } } If (And (PDC7, 0x08)) { Notify (\_PR.CPU7, 0x80) If (And (PDC7, 0x10)) { Notify (\_PR.CPU7, 0x81) } } } Else { Notify (\_PR.CPU0, 0x80) Notify (\_PR.CPU0, 0x81) } If (LEqual (DPTF, One)) { Notify (\_SB.IETM, 0x86) } } OperationRegion (MBAR, SystemMemory, Add (ShiftLeft (\_SB.PCI0.MHBR, 0x0F), 0x5000), 0x1000) Field (MBAR, ByteAcc, NoLock, Preserve) { Offset (0x938), PWRU, 4, Offset (0x9A0), PPL1, 15, PL1E, 1, CLP1, 1 } Name (CLMP, Zero) Name (PLEN, Zero) Name (PLSV, 0x8000) Name (CSEM, Zero) Method (SPL1, 0, Serialized) { Name (PPUU, Zero) If (LEqual (CSEM, One)) { Return (Zero) } Store (One, CSEM) Store (PPL1, PLSV) Store (PL1E, PLEN) Store (CLP1, CLMP) If (LEqual (PWRU, Zero)) { Store (One, PPUU) } Else { ShiftLeft (Decrement (PWRU), 0x02, PPUU) } Multiply (PLVL, PPUU, Local0) Divide (Local0, 0x03E8, , Local1) Store (Local1, PPL1) Store (One, PL1E) Store (One, CLP1) } compilelog.txt compilelog.txt Link to comment Share on other sites More sharing options...
mnfesq Posted January 7, 2015 Share Posted January 7, 2015 It would help if you attached your DSDT.aml or dsl. Link to comment Share on other sites More sharing options...
Recommended Posts