krytikal Posted December 6, 2014 Share Posted December 6, 2014 hi all i made a new computer material : motherboard P67 UD3P B3 rev F9 ( i use DSDT with chameleon) Audio AL889 (intel 1C20) OS 10.10 i try to have sound with AppleHDA but since 4 days i can't do i take pictures The sound card is recognized on Rapport system, but not on preference system i'm lost krytikal Link to comment Share on other sites More sharing options...
toleda Posted December 7, 2014 Share Posted December 7, 2014 The sound card is recognized on Rapport system, but not on preference system Screenshot shows Audio ID: 889. No patched Yosemite AppleHDA uses 889. Attach IOReg, dsdt and org.chameleon.Boot.plist Link to comment Share on other sites More sharing options...
krytikal Posted December 8, 2014 Author Share Posted December 8, 2014 thank you for answer Toleda i can give you next day IOReg because i'm not in my country today Extra.rar Link to comment Share on other sites More sharing options...
krytikal Posted December 9, 2014 Author Share Posted December 9, 2014 and here the file ( IOReg ) Mac Pro de gregmac.zip Link to comment Share on other sites More sharing options...
toleda Posted December 9, 2014 Share Posted December 9, 2014 and here the file ( IOReg ) Post #1 says Audio ID: 889 Post #3 says Audio ID: 1 Post #5 says Audio ID: 5 Only one Audio ID will work. What patched AppleHDA.kext is installed? What Audio ID does it use? Reply with one set of files: IOReg, dsdt, org.chameleon.Boot.Plist and System Information/Audio screenshot from the same boot. Link to comment Share on other sites More sharing options...
krytikal Posted December 9, 2014 Author Share Posted December 9, 2014 Toleda I tried a lot AppleHDA I have edited my dsdt and changed my appleHDA to set layout -id 889 . it's okay ? i join my appleHDA,IOReg, dsdt, org.chameleon.Boot.Plist thank's for your help gregfile.zip Link to comment Share on other sites More sharing options...
toleda Posted December 9, 2014 Share Posted December 9, 2014 I have edited my dsdt and changed my appleHDA to set layout -id 889 . it's okay ? No, ignored Post #2. For the second time, no audio with Audio ID: 889 or layout-id 889. dsdt says layout-id/1, org.chameleon.Boot.plist/2, installed enabler/5. Link to comment Share on other sites More sharing options...
krytikal Posted December 9, 2014 Author Share Posted December 9, 2014 ok so i change DSDT layout-id : 5 and on AppleHDA.kext. right ? Link to comment Share on other sites More sharing options...
toleda Posted December 9, 2014 Share Posted December 9, 2014 ok so i change DSDT layout-id : 5 and on AppleHDA.kext. No, 889 AppleHDA.kext determines the required layout-id. The AppleHDA.kext is not from 10.10 or 10.10.1; where did you get it? Link to comment Share on other sites More sharing options...
krytikal Posted December 9, 2014 Author Share Posted December 9, 2014 in this forum , but perhaps not for my motherboard and ios 10.10 http://www.insanelymac.com/forum/topic/298663-applehda-for-yosemite/ i put my appelHDA in trash ? Link to comment Share on other sites More sharing options...
toleda Posted December 9, 2014 Share Posted December 9, 2014 in this forum Contact the developer for support. Otherwise, install the native AppleHDA.kext and see Post #1, Yosemite: Audio - Realtek ALC AppleHDA Use procedure 1. realtekALC/patch in place or 2. Piker-Alpha AppleHDA8series Confirm dsdt/HDEF/layout-id/0x01,0x00,0x00,0x00 Remove S/L/E/HDAEnabler5.kext and org.chameleon.Boot.plist/HDAEabler=Yes and HDEFLayoutID=02000000 Restart. 1 Link to comment Share on other sites More sharing options...
krytikal Posted December 9, 2014 Author Share Posted December 9, 2014 ok thank's Toleda for your help i try Link to comment Share on other sites More sharing options...
krytikal Posted December 11, 2014 Author Share Posted December 11, 2014 yes!!!!!!! your are the best Toleda thank's a lot Link to comment Share on other sites More sharing options...
Kaya80 Posted February 6, 2015 Share Posted February 6, 2015 with this solution realtekALC/patch in place 1.Bootloaders: Chimera, Chameleon, Clover 2.Software Update: run same script after update restart 3.More Info: toleda/audio_RealtekALC 4.Installation - realtekALC 1.Download: (View Raw) audio_realtekALC-100.command.zip 2.Double click: Downloads/audio_realtekALC-100.command 3.Password? 4.Verify Codec - y/n? (885, 887, 888, 889, 892, 898, 1150 only) 5.Enable HD4600 HDMI audio - y/n? (887, 892, 898, 1150 only) 6.Restart 7.Verify Patched AppleHDA kext installed 1.S/L/E/AppleHDA.kext_vx.x-toledaALCxxx 8.Verify ALC onboard audio 1.System Preferences/Sound/Output/select audio device i've this message Error: no IOReg/HDEF ; Bios/Audio/disabled or ACPI Problem The second solution give me an error, ACPI Device (HDEF) not found ACPI tables appear to be broken and require (manual) patching What do i've to do?Using Chameleon 2538, AMD on Yosemite 10.10 and ALC889 codec Link to comment Share on other sites More sharing options...
toleda Posted February 8, 2015 Share Posted February 8, 2015 The second solution give me an error, ACPI Device (HDEF) not found ACPI tables appear to be broken and require (manual) patching Wrong thread. See Post #1, Problem Reporting, Yosemite: Audio - Realtek ALC AppleHDA. Post to same thread. Link to comment Share on other sites More sharing options...
Recommended Posts