carpetfizz Posted December 2, 2014 Share Posted December 2, 2014 Hello, I'm running OSX Yosemite 10.10.1 with the latest version of Clover bootloader on a Legacy motherboard. Below are my specs: Desktop Dell x8300 CPU Intel i7 2600 @ 3.4GHz. Motherboard Dell Inc. 0Y2MRG Graphics 2047MB Nvidia GeForce GTX 760 (MSI) Storage 250GB SanDisk SSD Network Dell Dw 1510 AGN Broadcom BCM94322 RAM 8GB DDR3 The problem is that when I put my computer to sleep, > Sleep , it sleeps but doesn't wake up. The glowing LED on my desktop turns off, and when I press it, the computer makes some noise and the LED turns on again, but neither my mouse, keyboard, or monitor is getting any power. I'm not sure if the computer actually woke up and that I can't see, or if there is another problem. I tried using darkwake=No, darkwake=0, and darkwake=1-10, but none of these worked. Attached is my config.plist. Thanks for any help! Carpetfizz config.plist.zip Link to comment Share on other sites More sharing options...
aol Posted December 2, 2014 Share Posted December 2, 2014 For what it's worth, several people seem to be having this issue. I know I have this issue on a GA X58A-UD3R/i7 930/GeForce 260 setup (booting using TonyMac's tools, not Clover). I've disabled sleep on this system until/if anyone comes up with a solution. 1 Link to comment Share on other sites More sharing options...
carpetfizz Posted December 3, 2014 Author Share Posted December 3, 2014 Yeah I've just been turning off my monitor when I don't have to use the system. Have the Energy Saver set to "Never" Link to comment Share on other sites More sharing options...
holyfield Posted December 3, 2014 Share Posted December 3, 2014 There are several reasons why. Probably some Clover settings aren't correct. Also, some comps wouldn't wake from USB device, but you have to push power button, and then, when led indicator shows light, you have to click mouse or press some button on keyboard. Run in terminal to see more detailed info about wake: syslog |grep -i "Wake reason" Link to comment Share on other sites More sharing options...
carpetfizz Posted December 4, 2014 Author Share Posted December 4, 2014 Hey, I tried running that command but nothing came up. I've already tried pressing buttons on my keyboard and mouse after pressing the power button and after seeing the LED power indicator. Link to comment Share on other sites More sharing options...
holyfield Posted December 4, 2014 Share Posted December 4, 2014 Hey, I tried running that command but nothing came up. I've already tried pressing buttons on my keyboard and mouse after pressing the power button and after seeing the LED power indicator. On this case your comp never wakes Try this: syslog |grep -i "Wake" Link to comment Share on other sites More sharing options...
carpetfizz Posted December 6, 2014 Author Share Posted December 6, 2014 Hi, thanks again for responding, here's a Pastebin of the log. Link to comment Share on other sites More sharing options...
crusher Posted December 6, 2014 Share Posted December 6, 2014 Go to Console/system.log and write wake reason. Link to comment Share on other sites More sharing options...
carpetfizz Posted December 6, 2014 Author Share Posted December 6, 2014 Hey crushers, nothing comes up under wake reason. Link to comment Share on other sites More sharing options...
KdeK Posted December 28, 2014 Share Posted December 28, 2014 Hi all, I was just wondering what kexts/settings are involved with the sleep/wake functionality. I encounter the same problem, however I'm using a legacy Mac Mini from 2006. So it is a little bit weird that the power management is failing for 10.10 and not for older versions. I've tried to use the power management kext of 10.6.8 but that didn't help. Any suggestions which kexts/settings are involved with the sleep/wake functionality? Many thanx in advance. Regards, Kees Link to comment Share on other sites More sharing options...
ipurc Posted December 28, 2014 Share Posted December 28, 2014 hey guys how to install clover in legacy and mbr partition ? Link to comment Share on other sites More sharing options...
sailor25462 Posted December 28, 2014 Share Posted December 28, 2014 Have you tried to eliminate the massive chrome error entries? Maybe if you remove chrome and see what's left... It also seems to complain on the disabled dark wake functionality. Link to comment Share on other sites More sharing options...
KdeK Posted December 28, 2014 Share Posted December 28, 2014 A small additional note. System appears to wake but the screen. I can access the computer externally by with terminal/ssh but the no screen. Does any one give this a clue? Link to comment Share on other sites More sharing options...
Allan Posted December 28, 2014 Share Posted December 28, 2014 hey guys how to install clover in legacy and mbr partition ? You can use this guide as an example: http://www.insanelymac.com/forum/topic/294150-tutorial-clover-uefi-e-legacy-no-lenovo-g480/?p=1973189 Link to comment Share on other sites More sharing options...
Recommended Posts