Jump to content

[Risolto] Speed Step


UltraLaser
 Share

133 posts in this topic

Recommended Posts

Ragazzi,

 

mi manca solo lo speed step poi il mio hack è (quasi) perfetto.

Premetto che prima di scrivere qui ho letto e provato tutto quello che ho trovato sul forum e su google...

 

Cmq, ho genrato il SSDT con l'uliity ssdtPRGen ed il processore viene riconosciuto e settato a dovere nel SSDT.aml :

ssdtPRGen.sh v0.9 Copyright © 2011-2012 by † RevoGirl

v6.6 Copyright © 2013 by † Jeroen

v14.5 Copyright © 2013-2014 by Pike R. Alpha

-----------------------------------------------------------

Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

 

System information: Mac OS X 10.10.1 (14B25)

Brandstring 'Intel® Core i3-4330T CPU @ 3.00GHz'

 

Scope (_PR_) {220 bytes} with ACPI Processor declarations found in the DSDT (ACPI 1.0 compliant)

Generating ssdt.dsl for a 'iMac14,2' with board-id [Mac-27ADBB7B4CEE8E61]

Haswell Core i3-4330T processor [0x306C3] setup [0x0905]

With a maximum TDP of 35 Watt, as specified by Intel

Number logical CPU's: 4 (Core Frequency: 3000 MHz)

Number of Turbo States: 0

Number of P-States: 23 (800-3000 MHz)

Injected C-States for CPU0 (C1,C3,C6,C7)

Injected C-States for CPU1 (C1,C2,C3)

lo messo nella cartella ACPI/Patched in Clover.

 

Faccio il boot con -xcpm ma gli speed step sono sempre due : 8 e 30

 

Ma cosa sbaglio????

 

BootLog:

 

 

0:100 0:100 MemLog inited, TSC freq: 3005213166

0:100 0:000

0:100 0:000 Now is 25.11.2014, 9:31:35 (GMT+2047)

0:100 0:000 Starting Clover rev 3021 on American Megatrends EFI

0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000) @B1282118

0:100 0:000 SelfDirPath = \EFI\BOOT

0:100 0:000 Total Memory Slots Count = 2

0:100 0:000 Type 17 Index = 0

0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1

0:100 0:000 Type 17 Index = 1

0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz

0:100 0:000 SmbiosTable.Type17->Size = 4096MB

0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1

0:100 0:000 Boot status=0

0:100 0:000 Clover revision: 3021 running on All Series

0:100 0:000 ... with board Z97I-PLUS

0:100 0:000 Clover load options size = 4 bytes

0:100 0:000 Found Plist String = , parse XML in LoadOptions

0:100 0:000 Xml in load options is bad

0:106 0:006 Using OEM config.plist at path: EFI\CLOVER\config.plist

0:107 0:000 EFI\CLOVER\config.plist loaded: Success

0:109 0:002 Found theme applestyle

0:112 0:003 Found theme christmas

0:114 0:002 Found theme NEWYEAR

0:116 0:002 Loading early settings

0:116 0:000 timeout set to 5

0:116 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)

0:116 0:000 KextsToPatch: 3 requested

0:116 0:000 KextToPatch 0: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8

0:116 0:000 KextToPatch 1: IOAHCIBlockStorage (Trim Patch) Kext bin patch, data len: 11

0:116 0:000 KextToPatch 2: IOBluetoothFamily (HandOff Fix) Kext bin patch, data len: 6

0:116 0:000 Default theme: applestyle

0:116 0:000 Hiding entries with string just_data

0:116 0:000 Hiding entries with string BOOTX64.EFI

0:116 0:000 Hiding entries with string Windows

0:116 0:000 Hiding entries with string sys_8

0:116 0:000 Hiding entries with string mac_data

0:116 0:000 LoadDrivers() start

0:118 0:002 Loading EmuVariableUefi-64.efi

0:119 0:001 load image status=Success

0:119 0:000 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success

0:119 0:000 Loading FSInject-64.efi

0:120 0:000 load image status=Success

0:120 0:000 Loading HFSPlus-64.efi

0:120 0:000 load image status=Success

0:120 0:000 - driver needs connecting

0:120 0:000 Loading OsxAptioFix2Drv-64.efi

0:122 0:001 load image status=Success

0:122 0:000 Loading OsxFatBinaryDrv-64.efi

0:123 0:001 load image status=Success

0:123 0:000 1 drivers needs connecting ...

0:123 0:000 PlatformDriverOverrideProtocol->GetDriver overriden

0:123 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok

0:230 0:107 LoadDrivers() end

0:230 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

0:237 0:006 SetScreenResolution: 1920x1080 - already set

0:237 0:000 Console modes reported: 4, available modes:

0:237 0:000 Mode 1: 80x25 (current mode)

0:237 0:000 Mode 2: 80x50

0:237 0:000 Mode 3: 100x31

0:237 0:000 Mode 4: 120x28

0:237 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000)

0:237 0:000 CPU Vendor = 756E6547 Model=306C3

0:237 0:000 The CPU not supported turbo

0:237 0:000 BrandString = Intel® Core i3-4330T CPU @ 3.00GHz

0:237 0:000 MSR 0xE2 before patch 00000000

0:237 0:000 MSR 0xE4 00000000

0:237 0:000 MSR 0xCE 00080838_F3011E00

0:237 0:000 non-usable FLEX_RATIO = 11E00

0:237 0:000 MSR 0x1B0 00000000

0:237 0:000 FSBFrequency=100MHz DMIvalue=100000kHz

0:237 0:000 Corrected FSBFrequency=100MHz

0:237 0:000 Vendor/Model/Stepping: 0x756E6547/0x3C/0x3

0:237 0:000 Family/ExtFamily: 0x6/0x0

0:237 0:000 MaxDiv/MinDiv: 30.0/8

0:237 0:000 Turbo: 30/30/30/30

0:237 0:000 Features: 0xBFEBFBFF

0:237 0:000 Threads: 4

0:237 0:000 Cores: 2

0:237 0:000 FSB: 100 MHz

0:237 0:000 CPU: 3000 MHz

0:237 0:000 TSC: 3000 MHz

0:237 0:000 PIS: 400 MHz

0:237 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000

0:237 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400

0:237 0:000 PCI (00|00:02.00) : 8086 0412 class=030000

0:237 0:000 Found GFX model=Intel HD Graphics 4600

0:237 0:000 PCI (00|00:03.00) : 8086 0C0C class=040300

0:237 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330

0:237 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000

0:237 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF

0:237 0:000 PCI (00|00:19.00) : 8086 15A1 class=020000

0:237 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320

0:237 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300

0:237 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400

0:237 0:000 PCI (00|00:1C.03) : 8086 8C96 class=060400

0:237 0:000 PCI (00|03:00.00) : 14E4 43B1 class=028000

0:237 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320

0:237 0:000 PCI (00|00:1F.00) : 8086 8CC4 class=060100

0:237 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601

0:237 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500

0:237 0:000 ScanSPD() start

0:237 0:000 SMBus CmdReg: 0x3

0:237 0:000 Scanning SMBus [8086:8CA2], mmio: 0xF7F38004, ioport: 0xF040, hostc: 0x11

0:252 0:014 SPD[0]: Type 11 @0x50

0:260 0:008 Found module with XMP version 1.3XMP Profile1: 10*1/8ns

0:260 0:000 Using XMP Profile1 instead of standard frequency 1600MHz

0:260 0:000 DDR speed 1600MHz

0:260 0:000 Slot: 0 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D34GX SerialNo=060D02090109060D

0:281 0:020 SPD[2]: Type 11 @0x52

0:289 0:008 Found module with XMP version 1.3XMP Profile1: 10*1/8ns

0:289 0:000 Using XMP Profile1 instead of standard frequency 1600MHz

0:289 0:000 DDR speed 1600MHz

0:289 0:000 Slot: 2 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C9D34GX SerialNo=07090208040F0807

0:415 0:126 ScanSPD() end

0:415 0:000 Get Acpi Tables List from RSDT:

0:415 0:000 Found table: FACP A M I len=132

0:415 0:000 Found table: APIC A M I len=114

0:415 0:000 Found table: FPDT A M I len=68

0:415 0:000 Found table: SSDT Ther_Rvp len=3197

0:415 0:000 Found table: SSDT Cpu0Ist len=1337

0:415 0:000 Found table: SSDT CpuSsdt len=2932

0:415 0:000 Found table: MCFG A M I len=60

0:415 0:000 Found table: HPET A M I len=56

0:415 0:000 Found table: SSDT SataTabl len=877

0:415 0:000 Found table: SSDT SaSsdt len=22903

0:415 0:000 Found table: BGRT A M I len=56

0:415 0:000 Calibrated TSC frequency =3005213166 =3005MHz

0:415 0:000 Loading main settings

0:415 0:000 USB FixOwnership: true

0:415 0:000 Dropping 2 tables

0:415 0:000 Drop table 0 signature="SSDT" (54445353) table-id="CpuPM" (0000004D50757043)

0:415 0:000 set table: 54445353, 4D50757043 to drop:

0:415 0:000 Drop table 1 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)

0:415 0:000 set table: 54445353, 74734930757043 to drop: true

0:415 0:000

0:415 0:000 Config set ChassisType=0xD

0:415 0:000 found 7 volumes with blockIO

0:415 0:000 0. Volume:

0:415 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)

0:417 0:002 1. Volume:

0:417 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)

0:419 0:002 Result of bootcode detection: bootable unknown (legacy)

0:419 0:000 2. Volume:

0:419 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,2439F926-92AC-4BFA-9A90-A8FAFD728FEF,0x28,0x64000)

0:420 0:000 Result of bootcode detection: bootable unknown (legacy)

0:433 0:013 This is SelfVolume !!

0:433 0:000 3. Volume:

0:433 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,40C7675C-AC93-4ECA-AB95-5BDB35E083C2,0x64028,0xDDFAC40)

0:434 0:000 4. Volume:

0:434 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,58E54DF0-5975-4748-AFCA-3E298AAD3199,0xDE5EC68,0x135F20)

0:434 0:000 5. Volume:

0:434 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,MBR,0x7197BA25,0x800,0xAF000)

0:435 0:000 Result of bootcode detection: bootable Windows (vista,win)

0:435 0:000 6. Volume:

0:435 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,MBR,0x7197BA25,0xAF800,0xDEE4800)

0:435 0:000 Result of bootcode detection: bootable Windows (vista,win)

0:439 0:003 Loading nvram.plist from Vol 'Yosemite' - loaded, size=827

0:442 0:002 PutNvramPlistToRtVars ...

0:442 0:000 Adding Key: EFIBluetoothDelay: Data: Size = 2: Success

0:442 0:000 Skipping EmuVariableUefiPresent

0:442 0:000 Adding Key: LocationServicesEnabled: Data: Size = 1: Success

0:442 0:000 Adding Key: MyVar: Data: Size = 9: Success

0:442 0:000 Adding Key: SystemAudioVolume: Data: Size = 1: Success

0:442 0:000 Adding Key: SystemAudioVolumeDB: Data: Size = 1: Success

0:442 0:000 Adding Key: bluetoothActiveControllerInfo: Data: Size = 16: Success

0:442 0:000 Adding Key: boot-args: String: Size = 15, Val = 'kext-dev-mode=1': Success

0:442 0:000 Adding Key: fmm-computer-name: Data: Size = 14: Success

0:442 0:000 Adding Key: prev-lang:kbd: Data: Size = 4: Success

0:442 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none': Success

0:443 0:001 Using theme 'applestyle' (EFI\CLOVER\themes\applestyle)

0:448 0:005 font PTMono_10W.png loaded from themedir

0:448 0:000 Choosing theme applestyle

0:448 0:000 found boot-args in NVRAM:kext-dev-mode=1, size=15

0:448 0:000 ...found arg:kext-dev-mode=1

0:448 0:000 Custom entries start

0:448 0:000 Custom entries finish

0:448 0:000 Scanning loaders...

0:448 0:000 0: 'Whole Disc Boot' no file system

0:448 0:000 1: 'Whole Disc Boot' no file system

0:448 0:000 2: 'EFI'

0:474 0:026 AddLoaderEntry for Volume Name=EFI

0:474 0:000 hiding entry: \EFI\BOOT\BOOTX64.efi

0:474 0:000 3: 'Yosemite'

0:479 0:004 AddLoaderEntry for Volume Name=Yosemite

0:483 0:004 Check if volume Is Hibernated:

0:483 0:000 Check sleep image 'by signature':

0:494 0:010 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success

0:494 0:000 SleepImage name from pref: ImageVolume = 'Yosemite', ImageName = '\private\var\vm\sleepimage'

0:496 0:002 Reading first 512 bytes of sleepimage ...

0:499 0:003 OurBlockIoRead: Lba=3924990, Offset=724932000 (BlockSize=512)

0:499 0:000 sig lion: F1E0BE9D

0:499 0:000 sig snow: 0

0:499 0:000 no valid sleep image offset was found

0:499 0:000 Reading completed -> Success

0:499 0:000 sleepimage offset could not be acquired

0:499 0:000 hibernated: no - sign

0:521 0:022 4: 'Recovery HD'

0:524 0:002 AddLoaderEntry for Volume Name=Recovery HD

0:545 0:021 5: 'Riservato per il sistema'

0:563 0:018 6: ''

0:584 0:020 Custom legacy start

0:584 0:000 Custom legacy end

0:584 0:000 Scanning legacy ...

0:584 0:000 0: 'Whole Disc Boot' (legacy) not legacy

0:584 0:000 1: 'Whole Disc Boot' (legacy) not legacy

0:584 0:000 2: 'EFI' (legacy) not legacy

0:584 0:000 3: 'Yosemite' (legacy) not legacy

0:584 0:000 4: 'Recovery HD' (legacy) not legacy

0:584 0:000 5: 'Riservato per il sistema' (vista,win) add legacy

0:587 0:003 added 'Boot Windows from Riservato per il sistema' OSType=2 Icon=vista,win

0:587 0:000 6: '' (vista,win) add legacy

0:589 0:001 added 'Boot Windows from ' OSType=2 Icon=vista,win

0:589 0:000 Custom tool start

0:589 0:000 Custom tool end

0:591 0:001 found tool \EFI\CLOVER\tools\Shell64U.efi

0:591 0:000 Checking EFI partition Volume 2 for Clover

0:591 0:000 Found Clover

0:592 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

0:595 0:003 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

0:602 0:006 GetEfiBootDeviceFromNvram: efi-boot-device-data not found

0:602 0:000 EfiBootVolume not found

0:602 0:000 found entry 0. 'Boot Mac OS X from Yosemite', Volume 'Yosemite', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,40C7675C-AC93-4ECA-AB95-5BDB35E083C2,0x64028,0xDDFAC40)\System\Library\CoreServices\boot.efi'

0:602 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored

0:602 0:000 DefaultIndex=0 and MainMenu.EntryCount=10

1:081 0:479 Found Mouse device:

1:083 0:001 GUI ready

3:795 2:711 Boot option Boot0000 not found

3:795 0:000 StartLoader() start

3:795 0:000 Finally: Bus=100173kHz CPU=3005MHz

3:795 0:000 Kernel and Kext Patches:

3:795 0:000 Allowed: y

3:795 0:000 Debug: n

3:795 0:000 KernelCpu: n

3:795 0:000 Lapic: n

3:795 0:000 AICPUPM: y

3:795 0:000 AppleRTC: y

3:795 0:000 KernelPm: n

3:795 0:000 FakeCPUID: 0x0

3:795 0:000 ATIController:

3:795 0:000 ATIDataLength: 0

3:795 0:000 0 Kexts to load

3:795 0:000 3 Kexts to patch

3:795 0:000 KextPatch[0]: 8 bytes, AppleAHCIPort

3:795 0:000 KextPatch[1]: 11 bytes, IOAHCIBlockStorage

3:795 0:000 KextPatch[2]: 6 bytes, IOBluetoothFamily

3:795 0:000 Loading boot.efi

3:808 0:012 load image status=Success

3:876 0:068 GetOSVersion: : 10.10.1

3:876 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success

3:882 0:006 insert table 9 for dev 19:0

3:882 0:000 insert table 9 for dev 0:0

3:884 0:001 Detected alternating SMBIOS channel banks

3:884 0:000 Channels: 2

3:884 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

3:884 0:000 SMBIOS Type 17 Index = 0 => 0 0:

3:884 0:000 BANK0 DIMM0 1600MHz 4096MB

3:884 0:000 mTotalSystemMemory = 4096

3:884 0:000 SMBIOS Type 17 Index = 1 => 1 2:

3:884 0:000 BANK1 DIMM0 1600MHz 4096MB

3:884 0:000 mTotalSystemMemory = 8192

3:884 0:000 SMBIOS Type 17 Index = 2 => 2 1:

3:884 0:000 BANK0 DIMM1 EMPTY

3:884 0:000 SMBIOS Type 17 Index = 3 => 3 3:

3:884 0:000 BANK1 DIMM1 EMPTY

3:884 0:000 NumberOfMemoryDevices = 4

3:884 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000

3:884 0:000 Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000

3:884 0:000 Table 131 is present, CPUType=10

3:884 0:000 Change to: 905

3:884 0:000 RSDT 0xBCB2E028

3:884 0:000 FADT from RSDT: 0xBCB2E110

3:884 0:000 XSDT 0xBCB2E080

3:884 0:000 FADT from XSDT: 0xBCB3CC70

3:884 0:000 Xsdt reallocation done

3:884 0:000 old FADT length=10C

3:884 0:000 Found OperationRegion(GNVS, SystemMemory, BCD64A98, ...)

3:884 0:000 Found OperationRegion(PNVA, SystemMemory, BCD65D98, ...)

3:884 0:000 Found OperationRegion(RCRB, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(XHCP, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(MCA1, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(PSCA, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(MCA1, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(RPAC, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(EPAC, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(CPSB, SystemMemory, BCB27E98, ...)

3:884 0:000 Found OperationRegion(MBAR, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(XHCN, SystemMemory, 0, ...)

3:884 0:000 Found OperationRegion(RAMW, SystemMemory, BCD50018, ...)

3:884 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...)

3:884 0:000 Found OperationRegion(RAMX, SystemMemory, BCD65C18, ...)

3:885 0:001 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml

3:887 0:001 page is allocated, write DSDT into

3:887 0:000 Apply DsdtFixMask=0x00000000 old way

3:887 0:000 drop _DSM mask=0x0000

3:887 0:000 ========= Auto patch DSDT Starting ========

3:887 0:000 VideoCard devID=0x4128086

3:887 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE

3:887 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE

3:887 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE

3:996 0:108 Found Airport BCM at 0x1C0003, 0x0

3:996 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE

3:996 0:000 first CPU found at 89F7 offset 89FA

3:996 0:000 score candidate at 89F3

3:996 0:000 score inserted in acpi_cpu_score _PR_

3:996 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7

within the score: _PR_

3:996 0:000 Found PCIROOTUID = 0

3:996 0:000 ========= Auto patch DSDT Finished ========

3:996 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=1337

3:996 0:000 Xsdt has tables count=11

3:996 0:000 Table: SSDT Cpu0Ist 1337 dropped

3:996 0:000 corrected XSDT length=116

3:996 0:000 Patch table: SSDT Ther_Rvp

3:996 0:000 SSDT len = 0xC7D

3:996 0:000 Patch table: SSDT CpuSsdt

3:996 0:000 SSDT len = 0xB74

3:996 0:000 Patch table: SSDT SataTabl

3:996 0:000 SSDT len = 0x36D

3:996 0:000 Patch table: SSDT SaSsdt

3:996 0:000 SSDT len = 0x5977

3:996 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

3:996 0:000 Xsdt has tables count=10

3:996 0:000 corrected XSDT length=116

3:996 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success

3:997 0:001 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4

3:997 0:000 EdidDiscovered size=128

3:997 0:000 00 | 00 FF FF FF FF FF FF 00 04 69 E1 24 01 01 01 01

3:997 0:000 16 | 10 17 01 03 80 35 1E 78 EA 9D E5 A6 54 54 9F 26

3:997 0:000 32 | 0D 50 54 B7 EF 00 71 4F 81 80 81 40 81 C0 81 00

3:997 0:000 48 | 95 00 B3 00 01 01 02 3A 80 18 71 38 2D 40 58 2C

3:997 0:000 64 | 45 00 13 2B 21 00 00 1E 00 00 00 FD 00 32 96 1E

3:997 0:000 80 | A0 21 00 0A 20 20 20 20 20 20 00 00 00 FC 00 56

3:997 0:000 96 | 47 32 34 38 0A 20 20 20 20 20 20 20 00 00 00 FF

3:997 0:000 112 | 00 44 34 4C 4D 51 53 30 35 37 35 35 37 0A 01 FB

3:997 0:000 Intel Intel HD Graphics 4600 [8086:0412] :: PciRoot(0x0)\Pci(0x2,0x0)

3:997 0:000 Intel GFX revision =0x6

3:997 0:000 USB Controller [8086:8CB1] :: PciRoot(0x0)\Pci(0x14,0x0)

3:997 0:000 LAN Controller [8086:15A1] :: PciRoot(0x0)\Pci(0x19,0x0)

3:997 0:000 USB Controller [8086:8CAD] :: PciRoot(0x0)\Pci(0x1A,0x0)

3:997 0:000 USB Controller [8086:8CA6] :: PciRoot(0x0)\Pci(0x1D,0x0)

3:997 0:000 stringlength = 2722

3:997 0:000 CurrentMode: Width=1920 Height=1080

3:997 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'

3:999 0:001 ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !

3:999 0:000 MSR 0x1B0 set to 00000000

3:999 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10

4:003 0:003 Extra kext: EFI\CLOVER\kexts\10.10\AppleIGB.kext

4:010 0:007 Extra kext: EFI\CLOVER\kexts\10.10\bcm4352.kext

4:013 0:002 Extra kext: EFI\CLOVER\kexts\10.10\BTFirmwareUploader.kext

4:055 0:041 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\BTFirmwareUploader.kext\Contents\PlugIns\BluetoothDevInfo.kext

4:058 0:003 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext

4:063 0:005 Extra kext: EFI\CLOVER\kexts\10.10\NullCPUPowerManagement.kext

4:068 0:005 Extra kext: EFI\CLOVER\kexts\10.10\AppleIntelE1000e.kext

4:076 0:007 Extra kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext

4:096 0:019 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleHDAController.kext

4:101 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleHDAHardwareConfigDriver.kext

4:105 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\AppleMikeyDriver.kext

4:110 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\DspFuncLib.kext

4:125 0:015 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\AppleHDA.kext\Contents\PlugIns\IOHDAFamily.kext

4:132 0:006 Extra kext: EFI\CLOVER\kexts\10.10\GPUSensors.kext

4:137 0:005 Extra kext: EFI\CLOVER\kexts\10.10\CPUSensors.kext

4:140 0:003 Extra kext: EFI\CLOVER\kexts\10.10\LPCSensors.kext

4:148 0:008 Extra kext: EFI\CLOVER\kexts\10.10\ACPISensors.kext

4:161 0:012 Removed efi-boot-device-data variable: Not Found

4:161 0:000 Custom boot screen not used because entry has unset use graphics

4:161 0:000 Closing log

 

 

 

Allego tutta la mia Direcotry di Clover (dentro ci sono il config.plist ed il SSDT.aml)

CLOVER.zip

post-1373167-0-05842700-1416908642_thumb.png

Link to comment
Share on other sites

UltraLaser una info please:

 

quando da terminale faccio la procedura per creare il SSDT.aml, alla fine mi chiede se voglio copiare il SSDT.aml generato nella directory: Extra/ssdt.aml:

 

do l'ok ma non mi trova la directory. Questa directory la devo creare io? e dove la creo esattamente?

 

Grazie.

Link to comment
Share on other sites

UltraLaser una info please:

 

quando da terminale faccio la procedura per creare il SSDT.aml, alla fine mi chiede se voglio copiare il SSDT.aml generato nella directory: Extra/ssdt.aml:

 

do l'ok ma non mi trova la directory. Questa directory la devo creare io? e dove la creo esattamente?

 

Grazie.

 

Se usi Clover devi metterla dentro alla partizione EFI che è nascosta :

 

dai il comando

diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Yosemite                119.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1

individua la EFI, nel mio caso è disk 0 s 1

 

quindi crea una cartella nella tua home :

mkdir EFI

e montala con :

sudo mount -t msdos /dev/disk0s1 EFI/

poi il file SSDT.aml lo copi dentro a EFI/CLOVER/ACPI/patched

 

se usi l'altro bootloader non saprei aiutarti :(

  • Like 1
Link to comment
Share on other sites

Grazie. Si ho clover e tutta la procedura che mi hai scritto la conosco. Tra l'altro tengo sempre visibile la cartella EFI. Ma probabilmente utilizziamo un altro sistema per creare il SSDT.aml.

 

Io sto usando questa procedura di RampageDev

1. Download ssdtPRGen.sh here

2.  Open Terminal and type in the following the command:

sudo

3. Now drag in the file that you have downloaded into Terminal and it should look like the following:

sudo /Users/Your User Name/Desktop/ssdtPRGen.sh
Note: My file was located on my desktop

5. Now type in the Turbo speed of the CPU

sudo /Users/Your User Name/Desktop/ssdtPRGen.sh -TURBO 4500

6. Now press enter and it may ask for your password

7. Once the file is generated place it into your Extra folder

E come vedi lui dice di inserire il SSDT.aml nella cartella Extra.

Link to comment
Share on other sites

Extra è la cartella di Chamaleon o Chimera in clover la cartella è quella che ti ho scritto poco sopra.

 

Io il ssdtPRGen.sh lo lancio da bash :

 

sudo chmod +x ssdtPRGen.sh

 

e poi

 

sh ./ssdtPRGensh

 

quando mi chiede di copiare in extra gli dico di NO e prendo la copia creata sul desktop e la metto in Clover

  • Like 1
Link to comment
Share on other sites

EDIT: ho visto ora che che la path di salvataggio è stata cambiata :

 

 

Output path changed from ~/Desktop/ and /tmp/ to ~/Library/ssdtPRGen/

 

 

Io sto ancora provando a fare andare lo speed step.

Non c'è verso di farlo andare, solo e sempre 8 e 30... non vorrei che il mio DSDT.aml abbia qualcosa di scazzato.. ma ho provato anche a disabilitarlo e bootare solo con il SSDT.aml ma ovviamente non funziona niente

 

:( 

 

Ho perso tutte le speranze perchè ho provato tutti i metodi che ho trovato su google :(

Link to comment
Share on other sites

Ok ci son riuscito: ora provo io e ti faccio sapere se a me funziona: ovvero vado oltre i 3.

 

EDIT:

 

Ho provato ma non è cambiato niente: sempre 3. 

Però c'è una novità importante: ho appena sentito rampagedev che mi ha detto che per la mia CPU (i74770k) non è necessario crearmi un SSDT.

Vedo però che la tua CPU differisce dalla mia.

Link to comment
Share on other sites

Si ho visto.... :yes:

 

Io parto dal presupposto che lui ne sa molto più di me: quindi mi son già messo il cuore in pace circa l'argomento. Certo, sarebbe utile sapere il perchè. 

Mi sembra di capire, da come leggo nel suo blog, che lo speed step via SSDT sia necessario con CPU di vecchia generazione.

Link to comment
Share on other sites

Io ho risolto in questo modo:

1) Generato la SSDT con SSDTPRGen.sh e posizionato il file in /EFI/CLOVER/ACPI/patched rinominandolo come " ssdt_pr.aml " [importante perché senza rinominarlo neanche a me leggeva più di due states]

Eccoti una guida che ti aiuterà a capire molte cose (non lo so se l'hai già utilizzata) http://www.insanelymac.com/forum/topic/295587-power-management-for-sandyivy-bridgehaswell-cpus/

 

2) A questo punto setti clover così: [Ti posto la sezione ACPI e BOOT]

<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>DropOEM_DSM</key>
			<true/>
			<key>Name</key>
			<string>DSDT.aml</string>			
		</dict>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<true/>
			<key>Generate</key>
			<dict>
				<key>CStates</key>
				<false/>
				<key>PStates</key>
				<false/>
			</dict>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>dart=0 -xcpm kext-dev-mode=1</string>
		<key>XMPDetection</key>
		<string>Yes</string>
	</dict>

A questo punto dovrebbe andare senza problemi.

 

airportmac

Link to comment
Share on other sites

 Share

×
×
  • Create New...