OS X on Compaq Presario CQ40

[vandebergz]

Hello everyone. I have this old notebook I want to try to install Hackintosh into it. I wonder if it could run Lion and up. The specs are:

 

Compaq Presario CQ40-114AX

Processor: AMD Turion x2 RM-70

Graphics: ATI Mobility Radeon HD 3400 Series

RAM: 3gb

Chipset: AMD 780G

 

Detailed speccs

 

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Turion X2 RM-70
Codename Griffin
Specification AMD Turion X2 Dual-Core Mobile RM-70
Package Socket S1 (638)
CPUID F.3.1
Extended CPUID 11.3
Brand ID 6
Core Stepping LG-B1
Technology 65 nm
TDP Limit 43.4 Watts
Core Speed 500.0 MHz
Multiplier x Bus Speed 2.5 x 200.0 MHz
HT Link speed 1799.9 MHz
Stock frequency 2000 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 2.5x - 6.0x
VID range 0.750 V - 1.200 V
# of P-States 3
P-State FID 0xC - VID 0x22 - IDD 14 (10.00x - 1.125 V)
P-State FID 0x10C - VID 0x30 - IDD 6 (5.00x - 0.950 V)
P-State FID 0x20C - VID 0x3C - IDD 3 (2.50x - 0.800 V)


Package Type 0x2
Model 70
String 1 0x1
String 2 0x0
Page 0x0
CmpCap 2
ApicIdCoreSize 2
TDC Limit 28 Amps
Boosted P-States 0
Max non-turbo ratio 10.00x
Max turbo ratio 10.00x
Max CPU COF 20
Core Performance Boost no
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Attached device PCI device at bus 0, device 24, function 4
TSC 2016.1 MHz

Chipset
-------------------------------------------------------------------------

Northbridge AMD 780G rev. 00
Southbridge AMD SB700 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 3 GBytes
Memory Frequency 333.3 MHz (3:5)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 20
Command Rate (CR) 2T
Uncore Frequency 1599.9 MHz

DMI Physical Memory Array
location Motherboard
usage System Memory
correction None
max capacity 3072 MBytes
max# of devices 2

DMI Memory Device
designation SODIMM 0
format SODIMM
type unknown
total width 64 bits
data width 64 bits
size 1024 MBytes

DMI Memory Device
designation SODIMM 1
format SODIMM
type unknown
total width 64 bits
data width 64 bits
size 2048 MBytes

Display Adapters
-------------------------------------------------------------------------

Display adapter 0
Name ATI Mobility Radeon HD 3400 Series
Board Manufacturer 0x103C (0x30FE)
Codename RV620LE
Technology 55 nm
Memory size 256 MB
Memory bus width 64 bits
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x1002 (0x103C)
Model ID 0x95C4 (0x30FE)
Performance Level 0
Core clock 110.0 MHz
Memory clock 500.0 MHz
Performance Level 1
Core clock 300.0 MHz
Memory clock 500.0 MHz
Performance Level 2
Core clock 500.0 MHz
Memory clock 500.0 MHz

Win32_VideoController AdapterRAM = 0x10000000 (268435456)
Win32_VideoController DriverVersion = 8.970.100.1100
Win32_VideoController DriverDate = 04/29/2013

 

 

I really hope anyone can tell me which version and which OSX installation file I should have, and help me in advance... Thank you very much.