esseave Posted October 22, 2014 Share Posted October 22, 2014 Ciao a tutti, sapete indicarmi dopo posso travere i kext : AppleHDA ALC889 IONetworkingFamily per questo aggiornamento? Grazie mille. Link to comment Share on other sites More sharing options...
Fabio1971 Posted October 22, 2014 Share Posted October 22, 2014 Audio : https://github.com/toleda/audio_ALC889 Quale chip ethernet monta la tua scheda Fabio Link to comment Share on other sites More sharing options...
esseave Posted October 22, 2014 Author Share Posted October 22, 2014 Grazie Fabio, l'ethernet è Marvell 88E8056 Link to comment Share on other sites More sharing options...
Fabio1971 Posted October 24, 2014 Share Posted October 24, 2014 Qui : http://www.insanelymac.com/forum/files/file/241-marvell-88e8056-for-mavericks-1093/ Fabio Link to comment Share on other sites More sharing options...
esseave Posted October 26, 2014 Author Share Posted October 26, 2014 Ethernet tutto ok..audio qualche problemino: File: audio_realtekALC-100.command_v1.0.0 Password: Confirm Realtek ALC889 (y/n): y Audio ID: 12 is not supported, continue (y/n): qualche suggerimento? Link to comment Share on other sites More sharing options...
Fabio1971 Posted October 26, 2014 Share Posted October 26, 2014 Quello è lo scipt per Yosemite Utilizza questo che ti passo, ti posto anche HDAEnabler in caso che non utilizzi dsdt AppleHDA-2.6.3f4-ALC889.zip HDAEnabler7.kext.zip Link to comment Share on other sites More sharing options...
esseave Posted October 27, 2014 Author Share Posted October 27, 2014 ancora niente, anche questo non va. Uso il dsdt, quindi ho scaricato solo il primo file.. Ho modificato il dsdt, installato il kext e riparato i permessi..ma niente.. Device (HDEF) { Name (_ADR, 0x001B0000) Method (_PRW, 0, NotSerialized) { Return (Package (0x02) { 0x0D, 0x05 }) } Method (_DSM, 4, NotSerialized) { Store (Package (0x0C) { "built-in", Buffer (One) { 0x00 }, "layout-id", Buffer (0x04) { 0x07, 0x00, 0x00, 0x00 }, "PinConfigurations", Buffer (One) { 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Link to comment Share on other sites More sharing options...
Fabio1971 Posted October 27, 2014 Share Posted October 27, 2014 Vai in Preferenze di Sistema -Suono e controlla l'uscita. Fabio Link to comment Share on other sites More sharing options...
esseave Posted October 27, 2014 Author Share Posted October 27, 2014 dice che non è stato trovato nessun dispositivo in uscita.. Link to comment Share on other sites More sharing options...
Fabio1971 Posted October 27, 2014 Share Posted October 27, 2014 Prova ha eliminare la parte di codice Device HDEF e utilizza HDAEnabler Fabio Link to comment Share on other sites More sharing options...
esseave Posted October 27, 2014 Author Share Posted October 27, 2014 Se elimino il codice funziona con HDAEnabler.. Link to comment Share on other sites More sharing options...
Fabio1971 Posted October 27, 2014 Share Posted October 27, 2014 Se elimino il codice funziona con HDAEnabler.. Da provare, io sulla scheda ( hardware venduto ) avevo lo stesso chip e funzionava quello che ti ho postatoSe vuoi passarmi il dsdt gli do un'occhiata Fabio Link to comment Share on other sites More sharing options...
esseave Posted October 27, 2014 Author Share Posted October 27, 2014 Grazie Fabio, ecco qui: dsdt.aml.zip Link to comment Share on other sites More sharing options...
Fabio1971 Posted October 28, 2014 Share Posted October 28, 2014 Ecco a te Fabio DSDT.aml.zip Link to comment Share on other sites More sharing options...
esseave Posted November 26, 2014 Author Share Posted November 26, 2014 Grazie Fabio, ho eliminato il kext HDAEnabler7 ed installato il DSDT da te inviato. Pare che funzioni tutto.. ancora grazie! Ancora un'altra cosa, mi capita spesso durante l'avvio di trovare la schermata di overclocking failed. Ovviamente non ho l'overclocking. Capitava anche a te? Da cosa dipende? Link to comment Share on other sites More sharing options...
Recommended Posts