ZombieBest Posted October 21, 2014 Share Posted October 21, 2014 Hello, I'm trying to install OSX Yosemite on my Asus G750JX with Intel Core i7-4700HQ and Nvidia gtx770M. I've created the USB bootable pendrive using Mavericks in VM, with the official Yosemite App downloaded from the AppStore. I've installed Clover as UEFI Bootloader. The PenDrive works, i can boot Yosemite but i can't reach the installation Screen. As you can see from screenshots in attachment i got stucked at that point. Ps: In EFI partition of Clover i've created the "10.10" folder under "kexts", and i've placed those kexts inside: AppleACPIPlatform.kext AppleStorageDrivers.kext FakeSMC.kext GenericUSBXHCI.kext IO80211Family.kext Any Advice? Thank you! Ps: Tried on a laptop with i7 and GT740M: Same Problem! #UPDATE 1: Solved that stuck problem by changing the USB Port of the Pendrive (Strage thing O.o) #UPDATE 2: "Solved" the "Black Screen Problem", but no QE/CI in Setup Screen (NVD Kexts disabled?) #UPDATE 3: Now I can't initialize the partition (No errors in Utlity Disk, simply stuck and doesn't go on) Link to comment Share on other sites More sharing options...
ZombieBest Posted October 21, 2014 Author Share Posted October 21, 2014 SOLVED! Now I have another problem: NVD kexts doesn't work with my gtx770M. After Boot (before reach the installation screen) I've got a Black Screen. If I use the bootflag "nv_disable=1" it works. What should I do? Link to comment Share on other sites More sharing options...
artur_pt Posted October 21, 2014 Share Posted October 21, 2014 hello first one must be gesensors .. inside fakesmc plugins if u use the flag .. u are disabling the nvidia in boot.. and u are booting without graphics .. only vesa mode anyway i don't know any kepler mobile working in mac os x .. if it have also the intel one .. try to work with the intel good hack Link to comment Share on other sites More sharing options...
XtremeTI Posted October 21, 2014 Share Posted October 21, 2014 SOLVED! Now I have another problem: NVD kexts doesn't work with my gtx770M. After Boot (before reach the installation screen) I've got a Black Screen. If I use the bootflag "nv_disable=1" it works. What should I do? Hi did you solve the issue? I'm getting same issue with NVidia drivers, they are not working in Yosemite and was working in Mavericks. Link to comment Share on other sites More sharing options...
ZombieBest Posted October 21, 2014 Author Share Posted October 21, 2014 Hello! I solved the "Black Screen Issue", really I don't know exactly how (I think it doesn't load NVD Kexts because i don't have Graphics Accelerator in setup). But now i have another problem (of course): When i go to initialize the partition as "Mac OS X Journaled" it doesn't work (stuck on "creating scheme to disk", or something similar). What's wrong now?X D Link to comment Share on other sites More sharing options...
RaphaelBEN Posted October 21, 2014 Share Posted October 21, 2014 Hi, have you tried booting in secure mode ? Link to comment Share on other sites More sharing options...
ZombieBest Posted October 21, 2014 Author Share Posted October 21, 2014 Hi, have you tried booting in secure mode ? Yes, nothing change. I can reach the Installation Setup, but in Disk Utility I can't initialize the partition! I tried to add those kext to Clover EFI, but no luck: AppleStorageDrivers.kext AHCI_3rdParty_SATA.kext Link to comment Share on other sites More sharing options...
RaphaelBEN Posted October 21, 2014 Share Posted October 21, 2014 Yes, nothing change. I can reach the Installation Setup, but in Disk Utility I can't initialize the partition! I tried to add those kext to Clover EFI, but no luck: AppleStorageDrivers.kext AHCI_3rdParty_SATA.kext Have you replaced your old fakesmc with the new one ? http://www.insanelymac.com/forum/files/file/266-fakesmckext-yosemite-1010/ Link to comment Share on other sites More sharing options...
ZombieBest Posted October 21, 2014 Author Share Posted October 21, 2014 Have you replaced your old fakesmc with the new one ? http://www.insanelymac.com/forum/files/file/266-fakesmckext-yosemite-1010/ Just did: got Kernel Panic at boot XD Link to comment Share on other sites More sharing options...
RaphaelBEN Posted October 21, 2014 Share Posted October 21, 2014 Just did: got Kernel Panic at boot XD I would return to last working config with new fakesmc or try the first "generic" config (to install for the first time)... Sorry but my knowledge seems to stop here, fakesmc solved all of my problems... Link to comment Share on other sites More sharing options...
ZombieBest Posted October 21, 2014 Author Share Posted October 21, 2014 It's the first time i try to install Hackintosh on this Notebook. I don't think is a FakeSMC problem because i can reach the Installation screen... Now seems there are some problems with the SATA Controller, which is a "Intel 8 Series Chipset Family SATA AHCI Controller". Any Kext for this? Ps: Edited the first Post with Changes Thank you all! Link to comment Share on other sites More sharing options...
RaphaelBEN Posted October 21, 2014 Share Posted October 21, 2014 It's the first time i try to install Hackintosh on this Notebook. I don't think is a FakeSMC problem because i can reach the Installation screen... Now seems there are some problems with the SATA Controller, which is a "Intel 8 Series Chipset Family SATA AHCI Controller". Any Kext for this? Sure, my mistake I thought it was an update... look for your pc with hackintosh on google is the best solution, I am too new to that world... sorry :/ Link to comment Share on other sites More sharing options...
AREOS Posted October 22, 2014 Share Posted October 22, 2014 Go to http://rog.asus.com/forum/showthread.php?39406-ASUS-G750JX-OSX-Mavericks-INSTALL-GUIDE all you need is there Good Luck Link to comment Share on other sites More sharing options...
ZombieBest Posted October 22, 2014 Author Share Posted October 22, 2014 Go to http://rog.asus.com/forum/showthread.php?39406-ASUS-G750JX-OSX-Mavericks-INSTALL-GUIDE all you need is there Good Luck EDIT: (i wrote all in Italian, don't know why XD) All that things are for Mavericks... Will they work on Yosemite too? Btw, now i'm trying to initialize an 80GB partition that i've created for Mac, on the SSD where is installed Windows too. But i get an error: "Insufficient Space to complete the operation". Can I create a Partition for Mac without initialize the entire SSD? Or is better if I create a Partition on the secondary HDD? Thanks! Ps: I'm doing UEFI Boot Link to comment Share on other sites More sharing options...
Recommended Posts