GA-B85M-D3H no booting even with flags

[inonehalf]

Hi everybody. I'm trying to install OSX Mavericks and  i cannot find a way to do it. I've read many posts but... nothing.

I've tried all kind of flags and i cannot manage even to enter the installation process. I've tried -x for safe mode and

the loading stucked (image). I really need help. I've been using OSX for a while now in a previous hackintosh that worked really good and dont need to boot with flags or anything else. And sorry for may english its not good at all.

 

This is may configuration

 

GA-B85M-D3H

intel i5 4440 Intel Graphics HD4600

8GB RAM (4 and 4) Kingston

HDD Sata 160GB (if the problem is the Hard Drive i cant try with Sata 2 1.5TB)

LG 22EA53VA

[artur_pt]

hello

 

probably is ur graphics ...

 

     Intel HD4000 and Haswell Inject AAPL,ig-platform-id    

 

need to inject in boot the right platform-id

 

good hack

[inonehalf]

Hello.

 

I,ve already done what u suggested. I used chamaleon and now i have another error. I injected IntelAzulFB=10 for HD4600 and GraphicsEnabler=Yes, -x -v. Also i dont have the monitor connected on DVI or HDMI port (is this important?). I have it on the normal blue port. what should i do?

sorry i,ve forgot the image

[vusun123]

Enter dart=0 too. I have a friend who have the same board, same cpu and it booted fine. The flags I used were: -v -f GraphicsEnabler=Yes dart=0 IntelAzulFB=10. Make sure you have FakeSMC.kext; also connect the monitor via HDMI or DVI. VGA isn't natively support for Haswell IGPU ( I used DVI )

Edit: Maybe the monitor's resolution is important too. I can't get it to boot using a monitor with resolution less than 1600x900