Narek-T Posted September 6, 2014 Share Posted September 6, 2014 Hi all. I have installed Os X Mavericks and have some issues. I working hard all day, but can't solve, please help me)My laptop Acer 5750G core i7 2630QM, Intel HD3000 + Geforce GT540m (I turned it off).1. HDMI. It seems not work when I connect my monitor (22'') via HDMI to laptop.. In Apple logo page its working, but when OS starts monitor is disabled and screen only from laptop monitor. I've tried 2-3 kexts, one of them worked, but I can't change resolution bigger than 1280...2. When I watch videos on Youtube, or anywhere else, flash player working so slow.. There are some unknown lines on player, its don't let me to watch videos normally..3. Wifi. I add kext and it works fine, but only when I connected to friends wifi router with no password)) In may router has password, I type it but can't connect, because of - "connection is failed"..4. Camera on laptop not recognized and don't work..5. And battery stat..6. And I can't boot without USB (Chimera bootloader). I think it is because of windows on same hard drive (other partition). Please, help me who can, and sorry for my English. Thanks a lotHere is screenshot of about Link to comment Share on other sites More sharing options...
iFIRE Posted September 6, 2014 Share Posted September 6, 2014 post a full Darwin Dumper report, copy extra folder from USBInstaller to the root HD/Partition Maverick, try install chameleon to Partition where you have installed Maverick, Link to comment Share on other sites More sharing options...
Allan Posted September 6, 2014 Share Posted September 6, 2014 See this about HDMI in HD 3000: [sUCCESS] Enable VGA and HDMI video for Intel HD 3000 And we don't give support for Tonymac tools (Chimera). Link to comment Share on other sites More sharing options...
Narek-T Posted September 6, 2014 Author Share Posted September 6, 2014 post a full Darwin Dumper report, copy extra folder from USBInstaller to the root HD/Partition Maverick, try install chameleon to Partition where you have installed Maverick, I'll do that when find in google what to do.. See this about HDMI in HD 3000: [sUCCESS] Enable VGA and HDMI video for Intel HD 3000 And we don't give support for Tonymac tools (Chimera). Thanks for link. Tonymac tool is simplest method for me Link to comment Share on other sites More sharing options...
iFIRE Posted September 6, 2014 Share Posted September 6, 2014 don't worry, Chimera is a trunk of Chameleon, and here no problem if you using this boot loader, download here https://bitbucket.org/blackosx/darwindumper/downloads/DarwinDumper_v2.9.6.zip 2 Link to comment Share on other sites More sharing options...
Narek-T Posted September 6, 2014 Author Share Posted September 6, 2014 Here is zip with reports Dumper (If I understand you right) http://testx.bl.ee/DarwinDumperReports.zip I'm sorry, I don't understand GPU-s CPU-s hacks and other.. I simply need OsX for testing my sites in xCode (I'm website developer). If I do something wrong, please, tell me right way and I'll do that. Link to comment Share on other sites More sharing options...
iFIRE Posted September 6, 2014 Share Posted September 6, 2014 your upload link fail, error Link to comment Share on other sites More sharing options...
Narek-T Posted September 6, 2014 Author Share Posted September 6, 2014 you can download it here http://testx.bl.ee there is no site, only attach file.. I can.. Here is dropbox link, I hope its all right)) http://www.dropbox.com/s/qav8uvq4g7uhiyv/DarwinDumperReports.zip?dl=0 Link to comment Share on other sites More sharing options...
iFIRE Posted September 6, 2014 Share Posted September 6, 2014 First, install Chameleon to your HD, then make this: ok, I make a new Extra folder with your DSDT patched for your Laptop, now copy the Extra folder to root of your Maverick HD, go to S/L/E and delete these kexts from photo, open Kext Wizard app and repairPermissions/REBUILD Caches/reboot. Extra.zip Good Luck!!! 1 Link to comment Share on other sites More sharing options...
Narek-T Posted September 6, 2014 Author Share Posted September 6, 2014 First, install Chameleon to your HD, then make this: ok, I make a new Extra folder with your DSDT patched for your Laptop, now copy the Extra folder to root of your Maverick HD, go to S/L/E and delete these kexts from photo, open Kext Wizard app and repairPermissions/REBUILD Caches/reboot. Extra.zip Captura de pantalla 2014-09-06 a la(s) 23.24.57.png Good Luck!!! Thank you very much! I'll do it and let you know. Link to comment Share on other sites More sharing options...
Narek-T Posted September 6, 2014 Author Share Posted September 6, 2014 did as you say and recive kernel panic with AppleCpuPowerMenegment Link to comment Share on other sites More sharing options...
iFIRE Posted September 6, 2014 Share Posted September 6, 2014 for now, to bypass this put the kext NULLCPUPowerManegement.kext in the Extra/Extensions or S/LE, then search a AICPUPM patched or patch this yourself 1 Link to comment Share on other sites More sharing options...
Narek-T Posted September 7, 2014 Author Share Posted September 7, 2014 for now, to bypass this put the kext NULLCPUPowerManegement.kext in the Extra/Extensions or S/LE, then search a AICPUPM patched or patch this yourself Okay, now os is loaded, but dont work all usb ports and laptop keyboard... I deleted everything, I will re-download the image and do that with chameleon.. Link to comment Share on other sites More sharing options...
Narek-T Posted September 8, 2014 Author Share Posted September 8, 2014 I installed new Os X, and clear some issues. At first I run my USB, with disc utility I create 3 partitions. First partition GUID for Os X, second msdos for Windows and third an empty space. After that I quit Os X installer, boot from DVD and install Windows 7 to second partition. After that I again boot from USB and install Os X to first partition. I hope I did that right Here is new darwin dumper reports zip (while running darwin dumper I receive an error about Radeon PCI, I don't know what is that..) http://www.dropbox.com/s/qav8uvq4g7uhiyv/DarwinDumperReports.zip?dl=0 Issues: 1. I install Os X with my 22" monitor connected to laptop via HDMI. Without that monitor I couldn't install Os X because of error transcript offline buffer pool allocate 18100 failed Now after installation I can't run my Os X without monitor connected to laptop via HDMI.. There is same error.. I usually work with connected monitor, but sometimes I need work without that, if that possible, please, help to fix it. Fixed via configuring power management. 2. Wifi. I still can't connect to my wifi. I can connect to friends wifi without password, but when I try to connect to my wifi, I write password, hit enter and receive error "connection failed". --- EDIT: When I remove password from my wifi it works... Adapter DLink DSL 2640U. 3. I can't boot without USB. I download and install Chameleon, but when try to boot without USB it write boot0: done and loading windows... Here is Chameleon install log text.. Chameleon installer log - Mon Sep 8 19:42:05 AMT 2014 Installer version: 2.2svn 2250 ====================================================== /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *640.1 GB disk0 1: Apple_HFS Os X 213.5 GB disk0s1 2: Windows_NTFS 213.4 GB disk0s2 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *2.0 GB disk1 1: DOS_FAT_32 NO NAME 2.0 GB disk1s4 ====================================================== Backup Chameleon files ====================================================== Clearing options... ====================================================== Running Standard postinstall script Target volume = /Volumes/Os X on /dev/disk0s1 Target disk has existing Windows boot loader - Will replace with boot0md (boot0workV2). Detected a Windows installation on this volume. ====================================================== Written boot0md to /dev/disk0. Written boot1h to /dev/rdisk0s1. Written boot to /Volumes/Os X on /dev/disk0s1. ====================================================== Preparing to check target disk for previous installations. Checking disk0. Nothing found that could cause any problems. ====================================================== Disk: /dev/rdisk0 geometry: 77825/255/63 [1250263728 sectors] Signature: 0xAA55 Starting Ending UPD: I try this method http://www.insanelymac.com/forum/topic/164809-how-to-install-chameleon-manually-v-2-and-v-1/ now when I try to boot without USB there are errors: boot0: test boot0: error 4. Os sometimes seems a little frozen, sometimes it frozen fully and helps only force turn off with stand by button on laptop... Fixed via configuring power management. Please, help me to solve this issues:) Thanks for any help. P.S. Please, see in darwin dumper report, I want to delete everything what doesn't work for my laptop. Regards Narek. Link to comment Share on other sites More sharing options...
iFIRE Posted September 8, 2014 Share Posted September 8, 2014 boot0 error ok, this is the second option for install it, download binarios chameleon folder i386 from section Downloads Forum 1. open the folder i386 and copy boot1h for your USBInstaller. 2. boot from USBinstaller and go for utilities and open app Terminal 3. type diskutil list for identified your disk and partition where you installed of system ML = "(i.e: disk0s2)" 4. type diskutil unmount disk0s2 5. type cd / 6. type dd if=boot1h of=/dev/disk0s2 bs=4096 or dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 7. reboot in steep 6 put your disk and partition "(i.e disk0s2 "), see your 1 Link to comment Share on other sites More sharing options...
Narek-T Posted September 8, 2014 Author Share Posted September 8, 2014 boot0 error ok, this is the second option for install it, download binarios chameleon folder i386 from section Downloads Forum 1. open the folder i386 and copy boot1h for your USBInstaller. 2. boot from USBinstaller and go for utilities and open app Terminal 3. type diskutil list for identified your disk and partition where you installed of system ML = "(i.e: disk0s2)" 4. type diskutil unmount disk0s2 5. type cd / 6. type dd if=boot1h of=/dev/disk0s2 bs=4096 or dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 7. reboot in steep 6 put your disk and partition "(i.e disk0s2 "), see your It works, thank you! But it seems I havent fortuna.. Now there are error - p state stepper er 18 at step 35 in context 2 on cpu 0 Link to comment Share on other sites More sharing options...
Recommended Posts