jmp909 Posted July 21, 2014 Share Posted July 21, 2014 Hi, after a few KP's i managed to get my fresh Mavericks 10.9.4 system working relatively smoothly, but i'm not really sure about Power Management, Speedstep, C-States,P-States etc and also Wake from Sleep is broken. (No video signal on wake). I don't really know about patching my motherboard etc. Couldn't find any pre-made patches. Also i don't really understand whether i need SSDT or DSDT (apparently not the latter for UEFI Mobo?) and I don't know how i test eg C-States, P-States etc or what I need them for. One thing that's a possible "issue" is the Corsair H80i, attached to the Mobo via mini-usb. there's no controller software for OSX obviously. When I had a 10.9 Mavericks working with Sleep, it would wake itself up immediately with GLAN EHC2. This may have been the USB connection on the fan forcing it to wake up but not sure. Currently though Wake is broken as mentioned, so I can't just test that issue by unplugging the USB at the moment) any advice & links would be gratefully appreciated. Presumably first step would be to fix the system to be able to remove NullCPUPowerManagement? thanks J Mavericks 10.9.4 (from App Store) myHack installer myHack AppleIntelCPUPowerManagement patch NullCPUPowerManagement.kext myHack TRIM patch kernel flags: npci=0x2000 dart=0 GraphicsEnabler=Yes Realtek81xx kext for ethernet (or might be using EthernetBuiltIn=Yes... not sure, as both present) Envy24 audio drivers for m-audio Audiophile2496 Chameleon NVFileRam kext for iMessage fix --- Motherboard: Asus P8B75-V (UEFI) CPU: i7 3770GPU: Zotac GT210 Cooler: Corsair H80i SSD: Samsung EVO840 250GB Link to comment Share on other sites More sharing options...
jmp909 Posted July 21, 2014 Author Share Posted July 21, 2014 As expected if I remove NullCPUPowerManagement from E/E my system Kernel Panics but I don't know how to fix itHelp please!ThanksJ Link to comment Share on other sites More sharing options...
charliebounce Posted July 21, 2014 Share Posted July 21, 2014 You need to use a patched AppleIntelCPUPowerManagement.kext to enable power management, sleep, speedstep etc. Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 Hello I fell free in give to you a method to install OSX in your PC... see that please... try boot Link to comment Share on other sites More sharing options...
jmp909 Posted July 22, 2014 Author Share Posted July 22, 2014 i think i managed to patch my AICPM enough to remove NullCPUPM (it's booting ok without it), but now after sleep/wake i get a KP when i go to terminal and start to type a find command (see screenshot) backtrace IOHIDFamily => dependency AppleFDEKeyStore .. and ... IOGraphicsFamily => dependency IOPCIFamily Link to comment Share on other sites More sharing options...
Allan Posted July 22, 2014 Share Posted July 22, 2014 repair your disk permissions and rebuild the cache, for this use KextWizard app. you changed something in those kexts? backtrace IOHIDFamily => dependency AppleFDEKeyStore .. and ... IOGraphicsFamily => dependency IOPCIFamily Link to comment Share on other sites More sharing options...
jmp909 Posted July 22, 2014 Author Share Posted July 22, 2014 i use myFix. i think that does the same thing I didn't change anything in those Kexts IOHIDFamily, AppleFDEKeyStore, IOGraphicsFamily, IOPCIFamily Link to comment Share on other sites More sharing options...
leonvmetcalf Posted July 22, 2014 Share Posted July 22, 2014 I don't even think that your motherboard supports flashing. Some B75 motherboards do not have the flashing feature, so you will have to generate your own SSDT and use a patched AICPUPM.kext as charliebounce mentioned. Link to comment Share on other sites More sharing options...
Pimentel Posted July 22, 2014 Share Posted July 22, 2014 Hello I didn't change anything in those Kexts IOHIDFamily, AppleFDEKeyStore, IOGraphicsFamily, IOPCIFamily I don't believe thta problem are in these kexts... the problems is in the system... bad configuration... Please try that method i gave to you, it'll help you to install OSX, after that is only care about post-installation Link to comment Share on other sites More sharing options...
jmp909 Posted July 24, 2014 Author Share Posted July 24, 2014 leonvmetcalf: i have done the AICPM patch and SSDT and sleep/wake working mostly fine now apart from the issue below with my TC Powercore PCI DSP cards not being recognized on restart or wake (although it's own control panel does see 2 cards, just not recognized) http://www.insanelymac.com/forum/topic/299743-powercore-pci-cards-not-recognized-after-restart-or-sleepwake/?do=findComment&comment=2043688 also I have some odd output during bootup about sleep, stepper and ErP timer, (see screenshot) and similar to thishttp://www.projectosx.com/forum/index.php?showtopic=2705&view=findpost&p=31266 Link to comment Share on other sites More sharing options...
jmp909 Posted July 24, 2014 Author Share Posted July 24, 2014 those ErP errors have gone since i switched to MacMini6,2 and regenerated my SSDT still got the PCI issue though Link to comment Share on other sites More sharing options...
Recommended Posts