...{v}... Posted June 19, 2014 Share Posted June 19, 2014 HelloI have a Asus P8Z77-V Motherboard with i5 3570 CPUI have already flashed my Bios with modified one using this RepoEverytime I boot . I never passed after thishttp://i.imgur.com/QCQ1Gzj.jpgJust after that I got blank screen . I have to Reset the PC in order to boot again.Can you guys please tell what I am doing wrong . Link to comment Share on other sites More sharing options...
dcai777 Posted June 19, 2014 Share Posted June 19, 2014 what graphics are you using? Link to comment Share on other sites More sharing options...
...{v}... Posted June 19, 2014 Author Share Posted June 19, 2014 GTX 560 , I also tried it on iGPU Link to comment Share on other sites More sharing options...
styrian Posted June 19, 2014 Share Posted June 19, 2014 OSX Version? Installmethod? SMBios? Link to comment Share on other sites More sharing options...
...{v}... Posted June 19, 2014 Author Share Posted June 19, 2014 I am using Unib**st with 10.9.3 Link to comment Share on other sites More sharing options...
dcai777 Posted June 19, 2014 Share Posted June 19, 2014 no unicrap here... Link to comment Share on other sites More sharing options...
...{v}... Posted June 20, 2014 Author Share Posted June 20, 2014 Ok I created the USB using MyHack this time . I got the same issue So I tried -v -x npci=0x2000 GraphicsEnabler=No It worked I installed it but after installation . When it start up in -v I got this message every time http://i.imgur.com/jkuozSnb.jpg After that I tried -v -x -s GraphicsEnabler=No Booting in safe mode works fine . So I installed Chameleon Boot-loader . When it boots normally I get this error http://i.imgur.comHVRvetc.jpg I used both settings iGPU and PCI in BIOS . iGPU with 64 MB . Every time it stuck there . Link to comment Share on other sites More sharing options...
styrian Posted June 20, 2014 Share Posted June 20, 2014 Hello! Try to add your system board ID from SMBios in the infoplist of AppleGraphicsControl.Kext/Contents/Plugings/AppleGraphicsDeviicePolicy.kext/Contents/Info.plist as last line of the Configmap with the other models in this way: <key>Mac-xxxxxxxxxxxxxxxxx</key> <string>none</string> Chanche xxxxxxx with your digits. Have fun. Link to comment Share on other sites More sharing options...
...{v}... Posted June 20, 2014 Author Share Posted June 20, 2014 Can you please help me thru . Should I change it in Pre installation (in the usb ) or after the Installation Sorry for the n00b question . I am trying it first time in PC. Link to comment Share on other sites More sharing options...
...{v}... Posted June 20, 2014 Author Share Posted June 20, 2014 I use this tutorial to create a USB for 10.9.3 In that I used SMBIOS iMac 13,2 Edited AppleGraphicsControl.Kext/Contents/Plugings/AppleGraphicsDeviicePolicy.kext/Contents/Info.plist Added <key>Mac-FC02E91DDD3FA6A4</key> <string>none</string> Still stuck http://i.imgur.com/jkuozSnb.jpg Even now -v -x GraphicsEnabler=No npci=0x2000 is not working to install . Link to comment Share on other sites More sharing options...
styrian Posted June 20, 2014 Share Posted June 20, 2014 Hello! Try to set PCIRootUID=0 or 1 and npci=0x2000 or 0x1000 in varios combinations. You should also try to set nv_disable=1. On most Asus mainboards is common for PCIRootUID=0, the default value of Chaemelon. Have fun. Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted June 20, 2014 Share Posted June 20, 2014 As you point out while at the same time suggesting to use it (???) PCI Root override is not necessary on his board. nv_disable=1 is nowhere to be found in the "official" version of Chameleon:http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/i386/boot2/boot.h The correct flag is SkipNvidiaGfx=Yes if he wants to use GraphicsEnabler for the HD4000 and ignore the nvidia card.If he wants to use HD4000 and the nvidia card, the HD4000 must be set as primary display device in the BIOS. Link to comment Share on other sites More sharing options...
...{v}... Posted June 20, 2014 Author Share Posted June 20, 2014 I am using Intel HD 4000 which is enabled as igpu 64 MB in BIOS SkipNvidiaGfx=Yes does not work either. Still stuck after Missing Bluetooth Controller which I am sure after that Graphics is next. Althought booting in safe mode mode is working fine for me . Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted June 20, 2014 Share Posted June 20, 2014 Correct, that indicates that its a graphics problem. Safe mode doesn't load video drivers, that's why it works for you. Again, if you want to use the HD4000, it must be set as primary display device. Link to comment Share on other sites More sharing options...
...{v}... Posted June 20, 2014 Author Share Posted June 20, 2014 To be honest I want to use my GTX 560 is there any way I can do that ? Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted June 20, 2014 Share Posted June 20, 2014 Disable the HD4000 in the BIOS, unplug any displays connected to it, make sure primary display device is set to PCI Express in the BIOS, then set GraphicsEnabler=y Link to comment Share on other sites More sharing options...
...{v}... Posted June 20, 2014 Author Share Posted June 20, 2014 Already Tried that not working Attaching the bios setting for Graphics Configuration Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted June 20, 2014 Share Posted June 20, 2014 Yes, the BIOS settings are the same on my board (P8Z77-V Pro, same CPU as you). Disable render standby as well, it's not needed since you won't be using the HD4000. If it still doesn't work then the problem is not BIOS settings, because then you'll have the same settings as I do. Link to comment Share on other sites More sharing options...
...{v}... Posted June 20, 2014 Author Share Posted June 20, 2014 Though I did just tried installing Mountain Lion with -v GraphicsEnabler=Yes it worked But after Choosing Language It says We could not Complete Your Purchase. OSX Mountain Lion is not compatible with this computer Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted June 20, 2014 Share Posted June 20, 2014 Use iMac13,1 smbios, and make sure you're using an unmodified installer. Meaning, if it did not come from the App Store, all bets are off. Link to comment Share on other sites More sharing options...
Recommended Posts