Terpsichore Posted June 4, 2014 Share Posted June 4, 2014 Hi everybody, I have a Lenovo G510 laptop, with Intel Core i5-4200M (Haswell) and HM86 chipset. Here's what I did so far: Downloaded AppStore's Mavericks Moved it in my 8 GB USB drive, then put Clover in there (copied EFI folder in my drive) I rebooted and it spawns Clover's screen, but if I select "Boot Mavericks" etc.. it shows me a forbidden sign as to say it cannot go on. So I tried to modifiy ig-platform-id to 0x0A260005, from here http://www.insanelymac.com/forum/topic/298018-lenovo-g510-compatibility-with-mavericks-1092/?do=findComment&comment=2023883 but it didn't work. I really don't know where is the problem, I thought that it is a graphic issue... P.S. I was told to apply RehabMan's patch for Haswell, but I still have no idea how to do that... I installed MaciASL, so far. Any help? Thanks Link to comment Share on other sites More sharing options...
RehabMan Posted June 4, 2014 Share Posted June 4, 2014 Hi everybody, I have a Lenovo G510 laptop, with Intel Core i5-4200M (Haswell) and HM68 chipset. Here's what I did so far: Downloaded AppStore's Mavericks Moved it in my 8 GB USB drive, then put Clover in there (copied EFI folder in my drive) I rebooted and it spawns Clover's screen, but if I select "Boot Mavericks" etc.. it shows me a forbidden sign as to say it cannot go on. So I tried to modifiy ig-platform-id to 0x0A260005, from here http://www.insanelymac.com/forum/topic/298018-lenovo-g510-compatibility-with-mavericks-1092/?do=findComment&comment=2023883 but it didn't work. I really don't know where is the problem, I thought that it is a graphic issue... P.S. I was told to apply RehabMan's patch for Haswell, but I still have no idea how to do that... I installed MaciASL, so far. Any help? Thanks Recent builds of Clover will apply my XCPM patch automatically. Setting the ig-platform-id will have no effect unless you Graphics/Inject/Intel=true. Link to comment Share on other sites More sharing options...
Terpsichore Posted June 4, 2014 Author Share Posted June 4, 2014 So it has to be changed to "true"? I checked and I see: <key>Graphics</key> <dict> <key>DualLink</key> <integer>0</integer> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <true/> <key>NVidia</key> <false/> </dict> <key>ig-platform-id</key> <string>0x0A260005</string> </dict> It it "true" already Link to comment Share on other sites More sharing options...
RehabMan Posted June 4, 2014 Share Posted June 4, 2014 So it has to be changed to "true"? I checked and I see: <key>Graphics</key> <dict> <key>DualLink</key> <integer>0</integer> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <true/> <key>NVidia</key> <false/> </dict> <key>ig-platform-id</key> <string>0x0A260005</string> </dict> It it "true" already Do you have a correct smbios configured? dart=0? Injecting FakeSMC.kext? Link to comment Share on other sites More sharing options...
Terpsichore Posted June 4, 2014 Author Share Posted June 4, 2014 Ehm... sorry, but where can I find dart parameter? smbios configuration is that in config.plist? And... FakeSMC.kext needs to be installed from here http://www.osx86.net/files/download/118-fakesmc/ or there's no need? (excuse me for the noobness) Link to comment Share on other sites More sharing options...
RehabMan Posted June 4, 2014 Share Posted June 4, 2014 Ehm... sorry, but where can I find dart parameter? smbios configuration is that in config.plist? And... FakeSMC.kext needs to be installed from here http://www.osx86.net/files/download/118-fakesmc/ or there's no need? (excuse me for the noobness) dart=0 is a Kernel Flag. You use it when you can't disable VT-d in BIOS. smbios is a section of config.plist. It should be set to a model that closely resembles your hardware. Both of the above can be setup with Clover Configurator. And yes, all hacks need FakeSMC to boot. You need to install it to EFI/Clover/kexts/10.9 and make sure you are injecting it via Clover. Link to comment Share on other sites More sharing options...
Terpsichore Posted June 4, 2014 Author Share Posted June 4, 2014 Ok, I modified the file and made sure that I have FakeSMC.kext in EFI/... folder. I added dart flag to config.plist, but I don't know how to make sure I'm actually injecting FakeSMC.kext. The check is meant to be within Clover's boot screen itself? I post my config file to you, maybe you'd notice some more. Edit: I just tried to boot up but it stucked as usual, and under the options it says "Intel i5 bla bla bla... WITH BOARD INVALID", so I think that the board configuration is wrong config.zip Link to comment Share on other sites More sharing options...
RehabMan Posted June 4, 2014 Share Posted June 4, 2014 Ok, I modified the file and made sure that I have FakeSMC.kext in EFI/... folder. I added dart flag to config.plist, but I don't know how to make sure I'm actually injecting FakeSMC.kext. The check is meant to be within Clover's boot screen itself? I post my config file to you, maybe you'd notice some more. Edit: I just tried to boot up but it stucked as usual, and under the options it says "Intel i5 bla bla bla... WITH BOARD INVALID", so I think that the board configuration is wrong config.plist: - no dart=0 - plugin-type in ACPI section should be 1 - you're using MacBookPro11,2. keep in mind that you need 10.9.3 to use that smbios. Link to comment Share on other sites More sharing options...
Terpsichore Posted June 4, 2014 Author Share Posted June 4, 2014 Config modified. I downloaded Mavericks app time ago, so i think that's 10.9.1 or .2 I can't download it from app store because my appleid is locked (I'm running Mavericks within a vmware workstation virtual machine, windows), so i'm downloading it "the dark way". Meanwhile, is there any working board configuration for 9.1 or 9.2, for instance with MacBookPro10 or whatever it is? Link to comment Share on other sites More sharing options...
Recommended Posts