glen8 Posted June 4, 2014 Share Posted June 4, 2014 Hi all,I've been running my hackintosh great for a few weeks now on 10.9.2. Zero problems and have been really pleased with it.Today I decided to build a new usb stick with 10.9.3 and did a fresh install. Everything was ok until I installed [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 6.3.0 and installed the same components as I did on 10.9.2.My machine now fails to bootany ideas?Intel i5 4440Gigabyte Z87-HD38GB Kingston Beast CAS9Samsung 120gb Evo SSDSeagate 2tb Time MachineI'm using Intel iGPU, BIOS Settings are the same as they were on 10.9.2Thanks!! Link to comment Share on other sites More sharing options...
kvonlinee Posted June 8, 2014 Share Posted June 8, 2014 can you boot with -x -v -f and post with the picture, if it is fine, then look for ig-platform-idto inject a correct value. Link to comment Share on other sites More sharing options...
sanalsahip Posted June 10, 2014 Share Posted June 10, 2014 dear glen. You solved this problem?. I have z87 hd3 mobo. but ınstalled 10,9,2 . for 10,9,2 gıve me kexts etc.. please Link to comment Share on other sites More sharing options...
SunLizard Posted June 10, 2014 Share Posted June 10, 2014 Are you using the Intel GFX as your Video Card? Had a similar issue with 10.9.3 on a Z97 board. couldn't even safe boot with 10.9.3... Ended up getting past that issue by removing all the FrameBuffer files for the HD4600 (I have a 4770k). Its kind of a brute-force fix --no finess -- but if you want to try to do it: boot to single user: -s (mount drive with on-screen instructions) cd /Volumes/HDD/System/Library/Extensions/ mkdir IntelFB-BAK mv AppleIntelSN* IntelFB-Bak reboot once up, fix permissions and continue with your install. Link to comment Share on other sites More sharing options...
Recommended Posts