chrisono Posted May 30, 2014 Share Posted May 30, 2014 I had a working 10.9.2 install and like a idiot i updated to 10.9.3 with no backup to restore to and my working 10.9.2 install went south badly. I formatted the drive and tried to install fresh and for a week now i for the life of me cant get past missing bluetooth controller transport! at start up. My system is a p8z77-v a intel I7-3770k and a gtx 560(non ti) with 8gigs of ram no other pci cards installed. I have tried 3 different methods of making the install usb all end in the same error, and my last install that booted with the flags GraphicsEnabler=Yes Dart=0 no longer boots with those and seems to only boot into safe mode 1 time after install then even with -x gives me the error. the flags i have tried are ( EthernetBuiltin=Yes (and no) GraphicsEnabler=Yes (and no) NPCI=0x2000 (and 0x3000) PCIRootUID=0 (and 1) Dart=0 IGPEnabler=No (and yes) this is pretty much the same result every time with some variations depending what flags i use but it always ends the same, any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 anyone? at this point open to trying anything up to and including any sort of voodoo with or without chicken bones Link to comment Share on other sites More sharing options...
carbo178 Posted June 3, 2014 Share Posted June 3, 2014 The right bootflags is GraphicsEnabler=Yes dart=0 (is case sensitive) If not work try to change primary video card in bios, set integrated HD4000 as primary and assign 32mb of video RAM; boot with GraphicsEnabler=Yes SkipNvidiaGfx=Yes dart=0 Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 same result for both Link to comment Share on other sites More sharing options...
carbo178 Posted June 3, 2014 Share Posted June 3, 2014 Are you sure if FakeSMC is installed in S/L/E? Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 yes it is installed Link to comment Share on other sites More sharing options...
carbo178 Posted June 3, 2014 Share Posted June 3, 2014 I have a system similar as your and i've no problems, wich bootloader is installed? Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 the latest from chameleon wizard and to boot up initially the one that is included in myhack Link to comment Share on other sites More sharing options...
carbo178 Posted June 3, 2014 Share Posted June 3, 2014 Try Clover in legacy mode; install Clover in a USB stick Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 ok, i will have to try that in a bit after i read up on clover and the wife is done with plex, will post back when i give it a go, and thank you for the help, it is much appreciated Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 ok so i tried clover, i have no idea what im doing, and if at all possible dont really want to go down that road as i have had it working 100% on chamelion Link to comment Share on other sites More sharing options...
carbo178 Posted June 3, 2014 Share Posted June 3, 2014 Try disable virtualization in bios Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 it is disabled, my bios settings are exactly as they were on the last successful install and boot Link to comment Share on other sites More sharing options...
carbo178 Posted June 3, 2014 Share Posted June 3, 2014 Sorry, no ideas Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted June 3, 2014 Share Posted June 3, 2014 Make sure HD4000 is completely disabled in the BIOS and that primary display is set to PCI Express or PEG or whatever it's called. There is no need to disable virtualization or override PCIRootUID on P8Z77 series boards. 1 Link to comment Share on other sites More sharing options...
MattsCreative Posted June 3, 2014 Share Posted June 3, 2014 Need help with this error I tried all the fixed not a thing worked and I cant boot clover with hd4000 graphics enabled does anyone have a fix Link to comment Share on other sites More sharing options...
theconnactic Posted June 3, 2014 Share Posted June 3, 2014 Strange: the HD4000 should work out of the box. Make sure you're using either DVI or HDMI - never VGA for the HD4000! - and a compatible SMBIOS. I recommend iMac 13,1 or 13,2. Good luck! Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 i have the hd4000 completely disabled and the gtx 560 plugged in via DVI Link to comment Share on other sites More sharing options...
MattsCreative Posted June 3, 2014 Share Posted June 3, 2014 Strange: the HD4000 should work out of the box. Make sure you're using either DVI or HDMI - never VGA for the HD4000! - and a compatible SMBIOS. I recommend iMac 13,1 or 13,2. Good luck! no when i have my hd4000 enabled in the bios i can't boot clover v2 Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 ok, i just reinstalled again... its working without safe mode only thing i dont have is audio but i never have that oob, im terrified to restart because it probably wont work if i do and uppon restart.... same damn thing Link to comment Share on other sites More sharing options...
chrisono Posted June 3, 2014 Author Share Posted June 3, 2014 ok, after 2 more re-installs its working. bootflags are -v GraphicsEnabler=Yes IGPEnabler=No dart=0 i have tried this combo before and it didnt work so im not sure whats going on that it works this time, only problem is now is my boot.plist is not being applied so i have to manually enter the flags at each boot Link to comment Share on other sites More sharing options...
SunLizard Posted June 10, 2014 Share Posted June 10, 2014 10.9.3 has IntelHD FrameBuffer issues. Didn't exist in previous versions. This is not a fix, but it will let you boot to desktop: Boot into single user mode (-s) & mount drive via on-screen instructions. cd /Volumes/{your Boot HDD}/System/Library/Extension/ mkdir IntelFB-Bak mv AppleIntelSN* IntelFB-Bak reboot I've also read that some audio is causing KP at boot after 10.9.3 If so you're concerned that might be a problem after boot, add mv AppleHD* IntelFB-Bak while you're at it. Link to comment Share on other sites More sharing options...
Recommended Posts