Jump to content

need help with Power management GTX 460 SE on 10.9.3


dreadkopp
 Share

8 posts in this topic

Recommended Posts

Aloha Community.

 

i am using a Nvidia GTX 460 SE with 10.9.3

 

dataz3p6r.gif load_freqpwqnp.gif 

 

in the past i used legacyAGPM.kext, which comes with Pandora to enable PowerManagement.

 

I use Clover as a bootloader since i am stuck with grey screen with chameleon.

 

There is also no entry in dsmeg about AGPM (not even unknown platform)?

 

Systeminformations confirms that the kext is not loaded: bildschirmfoto2014-05txuuj.jpg

 

 

The card runs a bit hot this way. Hope you guys can help me

 

 

Greetings!

 

 

 

 

dsmeg:

 
Longterm timer threshold: 1000 ms
rtclock_init: Taking bus ratio path 3 (AMD Phenom)
rtclock_init: Phenom MSR 0xc0010071 returned: 0x30bc00933800240e
TSC: Verification of clock speed not available in x86_64.
Darwin Kernel Version 13.0.0: \M-P\M-2\M-Q\M^B\M-P\M->\M-Q\M^@\M-P\M-=\M-P\M-8\M-P\M-:, 14 \M-Q\M^O\M-P\M-=\M-P\M-2\M-P\M-0\M-Q\M^@\M-Q\M^O 2014 \M-P\M-3. 20:54:33 (OMST); savvamitrofanov:xnu-master/BUILD/obj/RELEASE_X86_64
vm_page_bootstrap: 2520096 free pages and 84960 wired pages
kext submap [0xffffff7f807aa000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007aa000]
zone leak detection enabled
"vm_compressor_mode" is 4
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 74
NVClockX: NVClock Darwin port by alphamerik (C) 2010
NVClockX: usr-sse2 (C) 2010
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=132 Disabled
AppleACPICPU: ProcessorId=6 LocalApicId=133 Disabled
[MSR] unknown location 0x00000000000001a0\^M
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
 
MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x21 Vectors 64:87
ACPI: sleep states S3 S4 S5
pci (build 23:24:05 Apr 17 2014), flags 0x61008, pfm64 (44 cpu) 0xfff80000000, 0x80000000
RTC: Only single RAM bank (128 bytes)
[ PCI configuration begin ]
FakeSMC: opensource SMC device emulator by netkas (C) 2009
FakeSMC: plugins & plugins support modifications by mozodojo, usr-sse2, slice (C) 2010
FakeSMCDevice: 20 preconfigured key(s) added
FakeSMCDevice: successfully initialized
console relocated to 0xd5000000
[ PCI configuration end, bridges 5, devices 25 ]
USBF:    0.391    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.462    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.463    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.464    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.470    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.474    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.514    USBF:    0.514    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleepAppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
 
USBF:    0.518    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.519    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.525    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.526    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
NVClockX: Card: 0, Vendor ID: 10de, Device ID: e23, Architecture: 1000000, GF100 [GeForce GTX 460 SE]
USBF:    0.529    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.530    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.532    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.533    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.538    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.539    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBMSC Identifier (non-unique): KKCB7N10956      0xe8d 0x1836 0x0, 2
USBMSC Identifier (non-unique): 0x00000000 0x58f 0x6387 0x104, 2
NVClockX: BIOS successfully read
AppleKeyStore starting (BUILT: Apr 17 2014 23:36:27)
ITEIT87x: found ITE IT8712F
ITEIT87x:  mother vendor=ASUSTeK Computer INC. product=M4A88T-M_USB3
ITEIT87x: [Warning] set default configuration
mcache: 4 CPU(s), 64 bytes CPU cache line size
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
rooting via boot-uuid from /chosen: 9F8BCF2A-6286-3942-9448-9A42B61AEF74
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
Ethernet [RealtekRTL8111]: EEE support enabled.
Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled.
Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled.
Ethernet [RealtekRTL8111]: Using interrupt mitigate value 0xcf68.
Ethernet [RealtekRTL8111]: RTL8168E/8111E: (Chipset 14) at 0xffffff812c895000, 14:da:e9:74:59:52
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@180000/AppleACPIPCI/SATA@11/AppleAHCI/PRT2@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/SAMSUNG HD103SI Media/IOGUIDPartitionScheme/OSX@2
BSD root: disk1s2, major 1, minor 4
jnl: b(1, 4): replay_journal: from: 39138816 to: 41180672 (joffset 0xe91000)
jnl: b(1, 4): journal replay done.
hfs: mounted OSX on device root_device
USBF:    6.575    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    6.582    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
hfs: Removed 1 orphaned / unlinked files and 0 directories 
VM Swap Subsystem is ON
Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
Controller: NVidia GT104 (vendor ID: 10de, device ID: 0beb)
Controller: ATI SB600 (vendor ID: 1002, device ID: 4383)
Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
Previous Shutdown Cause: 3
**** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xbc00 ****
**** [CSRBluetoothHostControllerUSBTransport][start] -- completed -- 0xbc00 ****
NVDAStartup: Official
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
NVDAGF100HAL loaded and registered
flow_divert_kctl_disconnect (0): disconnecting group 1
jnl: disk1s3: replay_journal: from: 6566400 to: 8080896 (joffset 0xe8d000)
Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control
jnl: disk1s3: journal replay done.
hfs: mounted backup on device disk1s3
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
WARNING: IOPlatformPluginUtil : getCPUIDInfo unknown CPU family: family 0x10, model 0x4
  -- power management may be incomplete or unsupported
AmdCPUMonitor: found AMD Miscellaneous Control id=1203
init
probe
AmdCPUMonitor:  AMD CPU temperature sensor added
start
DSMOS has arrived
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xbc00 
[IOBluetoothHCIController][start] -- completed
[IOBluetoothHCIController::setConfigState] calling registerService
**** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1740 -- 0xb800 -- 0xbc00 ****
 
NTFS driver 3.11 [Flags: R/W].
NTFS volume name windows, version 3.1.
ast_pending=0xffffff8004ecb2a0
cpu_interrupt=0xffffff8004ee4450
vboxdrv: fAsync=0 offMin=0x16ea offMax=0x1dfc
VBoxDrv: version 4.3.12 r93733; IOCtl version 0x1a0007; IDC version 0x10000; dev major=31
VBoxDrv: vmx_resume=ffffff8004ef0df0 vmx_suspend=ffffff8004ef0db0 vmx_use_count=ffffff80054e1848 (0) cr4=0x660
VBoxFltDrv: version 4.3.12 r93733
VBoxAdpDrv: version 4.3.12 r93733
AppleKeyStore:Sending lock change 0
hfs: mounted Ohne Titel 1 on device disk2s2
 

my config.plist for clover:

 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>RtVariables</key>
<dict>
<key>LogEveryBoot</key>
<string>10</string>
<key>LogLineCount</key>
<integer>3000</integer>
<key>MountEFI</key>
<string>Yes</string>
</dict>
<key>SMBIOS</key>
<dict>
<key>BoardType</key>
<integer>11</integer>
<key>ChassisType</key>
<integer>6</integer>
<key>BiosReleaseDate</key>
<string>02/29/08</string>
<key>Version</key>
<string>1.0</string>
<key>SerialNumber</key>
<string>CK914G2VXYL</string>
<key>Manufacturer</key>
<string>Apple Computer, Inc.</string>
<key>BoardManufacturer</key>
<string>Apple Computer, Inc.</string>
<key>ChassisAssetTag</key>
<string>Pro-Enclosure</string>
<key>BiosVendor</key>
<string>Apple Computer, Inc.</string>
<key>ChassisManufacturer</key>
<string>Apple Computer, Inc.</string>
<key>BiosVersion</key>
<string>MP31.88Z.006C.B05.0802291410</string>
<key>Board-ID</key>
<string>Mac-F42C88C8</string>
<key>Family</key>
<string>Mac Pro</string>
<key>ProductName</key>
<string>MacPro3,1</string>
<key>Trust</key>
<false/>
<key>Memory</key>
<dict>
<key>SlotCount</key>
<integer>4</integer>
<key>Channels</key>
<integer>2</integer>
<key>Modules</key>
<array>
<dict>
<key>Slot</key>
<integer>0</integer>
<key>Size</key>
<integer>4096</integer>
<key>Frequency</key>
<integer>1600</integer>
<key>Vendor</key>
<string>G.Skill</string>
<key>Part</key>
<string>1</string>
<key>Serial</key>
<string>1</string>
<key>Type</key>
<string>DDR3</string>
</dict>
<dict>
<key>Slot</key>
<integer>1</integer>
<key>Size</key>
<integer>4096</integer>
<key>Frequency</key>
<integer>1600</integer>
<key>Vendor</key>
<string>G.Skill</string>
<key>Part</key>
<string>2</string>
<key>Serial</key>
<string>1</string>
<key>Type</key>
<string>DDR3</string>
</dict>
<dict>
<key>Slot</key>
<integer>2</integer>
<key>Size</key>
<integer>2048</integer>
<key>Frequency</key>
<integer>1600</integer>
<key>Vendor</key>
<string>G.Skill</string>
<key>Part</key>
<string>3</string>
<key>Serial</key>
<string>1</string>
<key>Type</key>
<string>DDR3</string>
</dict>
</array>
</dict>
</dict>
<key>Boot</key>
<dict>
<key>Arguments</key>
<string>nvda_drv=1 npci=0x2000 -v</string>
<key>DefaultVolume</key>
<string>MacHDD</string>
<key>Legacy</key>
<string>PBR</string>
<key>Log</key>
<false/>
<key>Timeout</key>
<integer>5</integer>
<key>XMPDetection</key>
<string>No</string>
<key>Secure</key>
<false/>
</dict>
<key>CPU</key>
<dict>
<key>FrequencyMHz</key>
<integer>3300</integer>
<key>BusSpeedkHz</key>
<integer>220000</integer>
</dict>
<key>Devices</key>
<dict>
<key>Audio</key>
<dict>
<key>Inject</key>
<string>No</string>
</dict>
<key>FakeID</key>
<dict>
<key>ATI</key>
<string>0x0</string>
<key>IntelGFX</key>
<string>0x0</string>
<key>NVidia</key>
<string>0x0</string>
<key>LAN</key>
<string>0x0</string>
<key>SATA</key>
<string>0x0</string>
<key>WIFI</key>
<string>0x0</string>
<key>XHCI</key>
<string>0x0</string>
<key>IMEI</key>
<string>0x0</string>
</dict>
<key>UseIntelHDMI</key>
<false/>
<key>USB</key>
<dict>
<key>Inject</key>
<false/>
<key>FixOwnership</key>
<true/>
<key>AddClockID</key>
<true/>
</dict>
</dict>
<key>DisableDrivers</key>
<array>
<string>Nothing</string>
</array>
<key>GUI</key>
<dict>
<key>Language</key>
<string>en:0</string>
<key>Theme</key>
<string>bootcamp</string>
<key>Mouse</key>
<dict>
<key>Speed</key>
<integer>8</integer>
<key>Enabled</key>
<true/>
</dict>
<key>Scan</key>
<dict>
<key>Entries</key>
<true/>
<key>Tool</key>
<true/>
<key>Legacy</key>
<string>First</string>
</dict>
<key>Hide</key>
<array>
<string>Windows</string>
<string>BOOTX64.EFI</string>
</array>
</dict>
<key>Graphics</key>
<dict>
<key>LoadVBios</key>
<true/>
<key>PatchVBios</key>
<true/>
<key>Inject</key>
<dict>
<key>Intel</key>
<false/>
<key>ATI</key>
<false/>
<key>NVidia</key>
<true/>
</dict>
</dict>
<key>ACPI</key>
<dict>
<key>DSDT</key>
<dict>
<key>Debug</key>
<false/>
<key>ReuseFFFF</key>
<false/>
<key>Name</key>
<string>dsdt.aml</string>
<key>Fixes</key>
<dict>
<key>AddDTGP_0001</key>
<true/>
<key>AddMCHC_0008</key>
<false/>
<key>FakeLPC_0020</key>
<false/>
<key>FixAirport_4000</key>
<true/>
<key>FixDarwin_0002</key>
<false/>
<key>FixDisplay_0100</key>
<true/>
<key>FixFirewire_0800</key>
<true/>
<key>FixHDA_8000</key>
<true/>
<key>FixHPET_0010</key>
<true/>
<key>FixIDE_0200</key>
<false/>
<key>FixIPIC_0040</key>
<true/>
<key>FixLAN_2000</key>
<true/>
<key>FixSATA_0400</key>
<false/>
<key>FixSBUS_0080</key>
<false/>
<key>FixShutdown_0004</key>
<true/>
<key>FixUSB_1000</key>
<false/>
<key>NewWay_80000000</key>
<true/>
<key>FixRegions_10000000</key>
<true/>
<key>FIX_RTC_20000</key>
<true/>
<key>FiX_TMR_40000</key>
<true/>
<key>AddIMEI_80000</key>
<true/>
<key>FIX_INTELGFX_100000</key>
<false/>
<key>FiX_WAK_200000</key>
<true/>
<key>DeleteUnused_400000</key>
<true/>
<key>FIX_ADP1_800000</key>
<true/>
<key>AddPNLF_1000000</key>
<true/>
<key>FIX_S3D_2000000</key>
<true/>
<key>FIX_ACST_4000000</key>
<true/>
<key>AddHDMI_8000000</key>
<true/>
</dict>
<key>DropOEM_DSM</key>
<false/>
</dict>
<key>DropTables</key>
<array>
<dict>
<key>Signature</key>
<string>DMAR</string>
</dict>
<dict>
<key>Signature</key>
<string>SSDT</string>
<key>TableId</key>
<string>CpuPm</string>
</dict>
<dict>
<key>Signature</key>
<string>SSDT</string>
<key>TableId</key>
<string>Cpu0Ist</string>
</dict>
</array>
<key>HaltEnabler</key>
<true/>
<key>SSDT</key>
<dict>
<key>DropOem</key>
<false/>
<key>Generate</key>
<dict>
<key>PStates</key>
<true/>
<key>CStates</key>
<true/>
</dict>
<key>EnableC6</key>
<true/>
</dict>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>AppleRTC</key>
<true/>
<key>AsusAICPUPM</key>
<true/>
<key>KextsToPatch</key>
<array>
<dict>
<key>Name</key>
<string>AppleAHCIPort</string>
<key>Find</key>
<data>
RXh0ZXJuYWw=
</data>
<key>Replace</key>
<data>
SW50ZXJuYWw=
</data>
<key>Comment</key>
<string>External icons patch</string>
</dict>
</array>
</dict>
<key>SystemParameters</key>
<dict>
<key>InjectSystemID</key>
<true/>
<key>InjectKexts</key>
<string>Detect</string>
</dict>
</dict>
</plist>
 

Link to comment
Share on other sites

hi.

 

i edited Info.plist fo AGPM.kext to this:

 

http://pastebin.com/zPTWcVqM

 

(look for MacPro3,1 section)

 

edit: changing the capital E to a minor e at deviceID producec the same result

 

still AGPM is not loading..

 
arnes-mac-pro:~ arne$ sudo dmesg | grep AGPM
arnes-mac-pro:~

okay. guess i got it all wrong.

 

i made a AGPM_Injector.kext, which Info.plist reads like this:

 

 

 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleIdentifier</key>
<string>com.pjalm.agpm</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>Apple Graphics Power Management</string>
<key>CFBundlePackageType</key>
<string>KEXT</string>
<key>CFBundleShortVersionString</key>
<string>0.4</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>3</string>
<key>IOKitPersonalities</key>
<dict>
<key>AGPM</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AGPM</string>
<key>IOClass</key>
<string>AGPMController</string>
<key>IONameMatch</key>
<string>AGPMEnabler</string>
<key>IOProbeScore</key>
<integer>1</integer>
<key>IOProviderClass</key>
<string>IOPlatformPluginDevice</string>
<key>Machines</key>
<dict>
<key>MacPro3,1</key>
<dict>
<key>Vendor10deDevice0e23</key>
<dict>
<key>control-id</key>
<integer>17</integer>
<key>max-power-state</key>
<integer>2</integer>
</dict>
</dict>
</dict>
</dict>
</dict>
<key>OSBundleRequired</key>
<string>Safe Boot</string>
<key>XX-IOKitDebug</key>
<integer>65535</integer>
</dict>
</plist>
 
Link to comment
Share on other sites

strangely i cannot edit my last post any further.

 

AGPM is still not loading.

 

dmesg output:

 

 

 
arnes-mac-pro:~ arne$ sudo dmesg
Password:
Sorry, try again.
Password:
Longterm timer threshold: 1000 ms
rtclock_init: Taking bus ratio path 0 (Boot-time argument)
TSC: Verification of clock speed not available in x86_64.
Darwin Kernel Version 13.0.0: \M-P\M-2\M-Q\M^B\M-P\M->\M-Q\M^@\M-P\M-=\M-P\M-8\M-P\M-:, 14 \M-Q\M^O\M-P\M-=\M-P\M-2\M-P\M-0\M-Q\M^@\M-Q\M^O 2014 \M-P\M-3. 20:54:33 (OMST); savvamitrofanov:xnu-master/BUILD/obj/RELEASE_X86_64
vm_page_bootstrap: 2540883 free pages and 64173 wired pages
kext submap [0xffffff7f807aa000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007aa000]
zone leak detection enabled
"vm_compressor_mode" is 4
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 74
NVClockX: NVClock Darwin port by alphamerik (C) 2010
NVClockX: usr-sse2 (C) 2010
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=132 Disabled
AppleACPICPU: ProcessorId=6 LocalApicId=133 Disabled
[MSR] unknown location 0x00000000000001a0\^M
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
 
MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x21 Vectors 64:87
ACPI: sleep states S3 S4 S5
pci (build 23:24:05 Apr 17 2014), flags 0x61008, pfm64 (44 cpu) 0xfff80000000, 0x80000000
RTC: Only single RAM bank (128 bytes)
[ PCI configuration begin ]
FakeSMC: opensource SMC device emulator by netkas (C) 2009
FakeSMC: plugins & plugins support modifications by mozodojo, usr-sse2, slice (C) 2010
FakeSMCDevice: 20 preconfigured key(s) added
FakeSMCDevice: successfully initialized
console relocated to 0xd5000000
[ PCI configuration end, bridges 5, devices 25 ]
USBF:    0.341    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.363    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.363    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.365    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.368    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.371    AppleUSBEHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.414    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleepUSBF:    0.414    
AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.417    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.419    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.425    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleepUSBF:    0.425    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
 
USBF:    0.428    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.428    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleepUSBF:    0.428    
AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.431    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.433    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    0.436    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
NVClockX: Card: 0, Vendor ID: 10de, Device ID: e23, Architecture: 1000000, GF100 [GeForce GTX 460 SE]
USBMSC Identifier (non-unique): KKCB7N10956      0xe8d 0x1836 0x0, 2
NVClockX: BIOS successfully read
AppleKeyStore starting (BUILT: Apr 17 2014 23:36:27)
ITEIT87x: found ITE IT8712F
ITEIT87x: [Warning] no OEMVendor
ITEIT87x: [Warning] set default configuration
mcache: 4 CPU(s), 64 bytes CPU cache line size
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
rooting via boot-uuid from /chosen: 9F8BCF2A-6286-3942-9448-9A42B61AEF74
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
Ethernet [RealtekRTL8111]: EEE support enabled.
Ethernet [RealtekRTL8111]: TCP/IPv4 segmentation offload enabled.
Ethernet [RealtekRTL8111]: TCP/IPv6 checksum offload enabled.
Ethernet [RealtekRTL8111]: Using interrupt mitigate value 0xcf68.
Ethernet [RealtekRTL8111]: RTL8168E/8111E: (Chipset 14) at 0xffffff81277a6000, 14:da:e9:74:59:52
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@180000/AppleACPIPCI/SATA@11/AppleAHCI/PRT2@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/SAMSUNG HD103SI Media/IOGUIDPartitionScheme/OSX@2
BSD root: disk1s2, major 1, minor 4
hfs: mounted OSX on device root_device
USBF:    5.842    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
USBF:    5.847    AppleUSBOHCI::CheckSleepCapability - controller will be unloaded across sleep
VM Swap Subsystem is ON
Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
Previous Shutdown Cause: 3
Controller: ATI SB600 (vendor ID: 1002, device ID: 4383)
Controller: NVidia GT104 (vendor ID: 10de, device ID: 0beb)
Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
**** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x4c00 ****
**** [CSRBluetoothHostControllerUSBTransport][start] -- completed -- 0x4c00 ****
NVDAStartup: Official
NVDAGF100HAL loaded and registered
flow_divert_kctl_disconnect (0): disconnecting group 1
hfs: mounted backup on device disk1s3
Ethernet [RealtekRTL8111]: Link up on en0, 1-Gigabit, Full-duplex, flow-control
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
WARNING: IOPlatformPluginUtil : getCPUIDInfo unknown CPU family: family 0x10, model 0x4
  -- power management may be incomplete or unsupported
AmdCPUMonitor: found AMD Miscellaneous Control id=1203
init
probe
AmdCPUMonitor:  AMD CPU temperature sensor added
start
DSMOS has arrived
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x4c00 
[IOBluetoothHCIController][start] -- completed
[IOBluetoothHCIController::setConfigState] calling registerService
**** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x4bc0 -- 0xe000 -- 0x4c00 ****
 
ast_pending=0xffffff80002cb2a0
cpu_interrupt=0xffffff80002e4450
vboxdrv: fAsync=0 offMin=0x1fe4 offMax=0x2bc0
VBoxDrv: version 4.3.12 r93733; IOCtl version 0x1a0007; IDC version 0x10000; dev major=31
VBoxDrv: vmx_resume=ffffff80002f0df0 vmx_suspend=ffffff80002f0db0 vmx_use_count=ffffff80008e1848 (0) cr4=0x660
NTFS driver 3.11 [Flags: R/W].
NTFS volume name windows, version 3.1.
VBoxFltDrv: version 4.3.12 r93733
VBoxAdpDrv: version 4.3.12 r93733
AppleKeyStore:Sending lock change 0
 

 

still hope someone can help me

 

greetz

Link to comment
Share on other sites

AGPM does not have and has never had an entry for the MacPro3,1. That's why it isn't loading for you in the first place.

 

I don't know what you need to do to make a working legacy kext when using that model identifier. Maybe it's easier to simply replace on of the existing entries in AGPM with MacPro3,1 and work from there?

Link to comment
Share on other sites

I don't think anybody is knowingly stealing anybody's thunder here, most people simply don't remember or don't know where the original ideas come from.

I know you and your family and friends are responsible for quite a few innovations that most people take for granted today. I hope you don't worry too much about that, because there would be a lot to worry about. :D

 

Great work by your dad as always, there's no doubt about that. I remember very well, I was right there at the time, under a different and more stupid name...

 

The question is, will that particular kext still work today?

Link to comment
Share on other sites

okay. edited the AGPM.kext directly again since the injector does not seem to work.

 

dmesg output says that the states be switched but cuda-z is not showing major differences in GPU Core Performance. Also the Card stays hot at 50 ° C.

 

ideas?

post-500265-0-47088500-1400776411_thumb.png

Link to comment
Share on other sites

 Share

×
×
  • Create New...